If I install RealmSwift into an ios app using SPM, I have no problems. However if I install it into an ios framework, then when building there is this error: error: missing required modules: 'Realm.Private', 'Realm', 'Realm.Swift' I have discovered that if I change the import statement from: import RealmSwift to private import RealmSwift then doing that makes this build error goes away (but doing that isn't a feasible workaround as I would like to publicly export classes stored in Realm from the framework). There's no point in posting issues with Realm on their support board as its being deprecated and its tumble weeds on their forum. But I would be very interested in hearing from the Apple expects explanation or speculation on: why is importing the same framework via SPM into a framework xcode project resulting in different behavior then when importing it into an app? why would changing import to private import make the build error go away? TIA

I am trying to integrate Apple Music API using MusicKit and need to generate a Developer Token. However, when I try to create a new key from the Certificates, Identifiers & Profiles section, the “Media Services (MusicKit, ShazamKit, Apple Music Feed)” option is grayed out. We are getting the error 'there are no identifiers available that can be associated with the key.' Although we did checkmark 'musickit' in app services. I have already: Enrolled in the paid Apple Developer Program Created a valid App ID under Identifiers Logged in as the Account Holder Tried multiple browsers and devices Despite this, the option remains disabled. Could you please enable this or let me know what further steps I need to take? Thank you!

The flags like #if DEBUG ... endif are dependent on the Active Compilation Conditions. So if they say DEBUG the enclosed code block will be executed, otherwise not. Now I have the phenomenon that a #DEBUG block in a Package does not evaluate these conditions. It rather depends on the name of the configuration used to build. So if I build my app with Active Compilation Condition set to DEBUG, but the configuration name is something like App-Release, the DEBUG block in my Package is not added/executed. The ones which are directly in the project are added. Vice versa if the Compilation Condition say RELEASE but the configuration is called App-Debug the blocks in the Package are added to the compilation, but the ones in the project itself are not It suffices that the config name contains the word Debug for this to happen. E.g. the configuration App-Release-Debug (I know that this would be stupid, but it is for demonstrating purposes) will cause the Packages to include the DEBUG blocks. This happens no matter what you set in the Build Settings of the project and/or target. The Packages are added via GitHub/GitLab Source Control with SPM. Any ideas why this behaves like it does? It doesn't seem like it should...

Hi all, I’m running into a persistent linker error when building my Unity 6 project (IL2CPP, iOS target) that calls a Swift method via an Objective-C++ wrapper. Despite following all known steps, I keep getting: Undefined symbols for architecture arm64: "_placeGeoAnchor", referenced from: _GeoAnchorTrigger_placeGeoAnchor in libGameAssembly.a ... ld: symbol(s) not found for architecture arm64 I’m trying to place a persistent AR anchor at real-world GPS coordinates (so that the same asset can appear at the same location for a returning user). Since I’m targeting iOS, I can’t use Google’s geospatial anchors (but I sooo wish I could--please apple I beg of you stop being so selfish lol). I've already done these things: Swift file is added to Unity-iPhone target. .mm and .h files are in Unity-iPhone target under Compile Sources. Bridging header is set to Unity-iPhone-Bridging-Header.h. Generated header name is correct (GeoTest-Swift.h). Build Active Architecture Only set to No. Function has attribute((visibility("default"))). Unity project uses IL2CPP scripting backend. Yet I'm still getting the same linker error — it appears Unity (via IL2CPP) references the function, but Xcode doesn't link it. It’s something small that’s being missed with how IL2CPP links native symbols? Or maybe I need to explicitly include something in Link Binary With Libraries? I’ve verified symbol visibility and targets repeatedly. I’ve built AR features in Unity before (for Quest), but this is my first time trying to bridge C# → Objective-C++ → Swift in this way for a geolocation-based AR anchor for an iphone. I'm going crazy, I’ve been stuck on this for 12+ hours now, so any insight or nudge would be deeply appreciated. SPECS: Macbook Pro M4 Pro--Sequoia 15.4 Unity 6000.0.45f1 IPhone 11 iOS 18.4 Xcode 15

I'm pretty new on this platform and also developing IOS mobile apps. I've been struggling for using the data of the api weather kit apple. I have an acount of apple developer, downloaded the certificate... i follow all the necessaries steps in the portal and also in my project and i keep having this error message when i try to use it. I don't know what else should i do for having working it. I would absolutely appreciate that someone could help me with this. Thank you very much!!!!! Encountered an error when fetching weather data subset; location=<+41.38268070,+2.17702390> +/- 0.00m (speed -1.00 mps / course -1.00) @ 2/3/25, 22:54:03 Central European Standard Time, error=WeatherDaemon.WDSJWTAuthenticatorServiceListener.Errors 2 Error Domain=WeatherDaemon.WDSJWTAuthenticatorServiceListener.Errors Code=2 "(null)"

I'm experiencing an issue with a custom font not loading properly in Xcode 16.3. The font files are included in the bundle, listed in Info.plist, and verified for correct names using UIFont.familyNames, but they still don't appear at runtime. Has anyone else run into this with Xcode 16.3? Could this be related to recent changes in asset packaging or font catalogs?

I can't create a developer account. Setting to admin role does not work, follow the invite and then verify email, after that get shown a phone prompt, used every number I have that has SMS, or tried callbacks... { "service_errors" : [ { "code" : "-28248", "message" : "Verification codes can’t be sent to this phone number at this time. Please try again later.", "suppressDismissal" : false } ], "hasError" : true }

My newly registered Apple Developer account has been unexpectedly blocked before I was able to submit our app. This is our first iOS app and I believe this may be a misunderstanding. We’d like to resolve this as quickly as possible (case ID is 102568035119). Please let us know the steps we need to take.

The WatchOS developer is not allowed to obtain healthKit permission status. The result is always unauthorized (either by clicking the dot/cross in the upper left corner or by turning on all Health, on some, off all). WatchOS 开发获取 healthKit 的权限状态authorizationStatus不准。结果始终都是未授权（无论是点击左上角的点叉号还是开启全部健康项开关，开启部分，关闭所有），怎么处理？

I'm currently transferring an iOS app to a new Apple Developer account and following the process outlined in Apple’s documentation: 🔗 TN3159 - Migrating Sign in with Apple users for an app transfer The process for generating transfer_identifiers and migrating existing users is clear, and I don’t expect issues with that part. However, I have a question about preserving the user session after the transfer. My setup: The app uses Sign in with Apple via a backend-based authentication flow. On login, the app retrieves the authorization_code and sends it to the backend. The backend exchanges the code for tokens from Apple, including a refresh_token. That refresh_token is then used on the backend to validate the user’s identity on subsequent requests. My concern: Once I initiate the app transfer, migrate users, and update the backend with new Apple credentials (client ID, team ID, etc.), I assume that the existing tokens issued under the old credentials will become invalid. So my question is: Is there a way to maintain the user’s authenticated session through this transition without requiring them to manually sign in again? I’d like to ensure a seamless experience for users, if possible.

Bluetooth connection is very buggy since updating to iOS 18.4. Beta X (with all betas) Airpods Pro 2 most of the time don't connect directly with my Iphone 15 Max. I have to disable bluetooth and then the connection works find. This issue ist not only with my Airpods, but also with the car, ... Very annoyinig. I reset the network settings. But this didn't help. Any suggestion how to fix this? I hear from quite a few people that they have bluetooth issues with iOS 18.X. Hope Apple fixes this soon.

I don't know Xcode very well, and had been using it sporadically to test a project exported from Unity. I recently added a StoreKit Configuration to the project, and since then it gives me ≈10s after launching before the beach ball appears, and it never leaves. Xcode says it is "Indexing" but I don't know if that's an obvious culprit. I can still build my project via the fastlane tool, on the command line, and the newly-added StoreKit configuration works just fine. But I cannot use Xcode interactively any more, unless I re-export the project from Unity. The only difference between it working and hanging is the Store Kit configuration. How do I understand what's going on, and (ideally) fix it? The Activity Monitor gives a bunch of backtraces that don't have an obvious network or I/O culprit in them.

I can use devicectl to copy single files from a device fine using: xcrun devicectl --verbose device copy from --user mobile --domain-identifier <BUNDLE_ID> --domain-type appDataContainer --device <DEVICE_ID> --source Documents/Screenshots/0001.png --destination Screeshots/0001.png but when there are many files this can get pretty slow. Is there a way of recursively copying an entire directory? I've tried this: xcrun devicectl --verbose device copy from --user mobile --domain-identifier <BUNDLE_ID> --domain-type appDataContainer --device <DEVICE_ID> --source Documents/Screenshots --destination Screeshots but nothing is transferred and it times out eventually with the error: ERROR: The specified file could not be transferred. (com.apple.dt.CoreDeviceError error 7000 (0x1B58)) ERROR: The operation couldn’t be completed. The file service client failed to read data from the network socket because we timed out when waiting for data to become available. (NSPOSIXErrorDomain error 60 (0x3C)) NSLocalizedFailureReason = The file service client failed to read data from the network socket because we timed out when waiting for data to become available. Xcode itself can do it with the "download container..." option, but I'd like to be able to automate it.

How can i find who use this to authenticate control my macOS installation process?

Hello. We're developing an app with Flutter that receives VoIP calls. However, when the app is in the background or closed, the push notification arrives, but the call doesn't. It works perfectly when the app is open. We use Firebase, Flutter, and JANUS WebRTC. We need to know what type of permissions or actions we should consider so that the app opens when it receives a call. How can we resolve this issue? Thank you very much.

Hi, I am able to build my iOS app successfully, developed in objective-C with iOS 17.5 SDK and Xcode 15. Due to requirement of Appstore we are trying to build with iOS 18 SDK and Xcode 16. When building getting error in LAEnvironmentState.h file: a) "Property requires field to be named" b) "Expected member name or ';' after declaration specifiers" Same app when opening with Xcode 15 gets build without any issue. Any help/suggestion would be appreciated.

I’m creating code that performs asynchronous processing using the Promises library (https://github.com/google/promises). In this context, when building the app in Xcode 15.4 and Xcode 16.2, the behavior differs between the two. I’m using version 2.1.1 of the library. Also, I’ve tried using the latest version, 2.4.0, but the result was the same. Has anyone encountered the same issue or know an effective solution? Here's a simple code that reproduces this issue. @IBAction func tapButton(_: UIButton) { _ = getInfo() } func getInfo() -> Promise<Void> { Promise(on: .global(qos: .background)) { fulfill, _ in self.callApi() .then { apiResult -> Promise<ApiResult> in print("\(#function), first apiResult: \(apiResult)") return self.callApi() // #1 } .then { apiResult in print("\(#function), second apiResult: \(apiResult)") // #2 fulfill(()) } } } func callApi() -> Promise<ApiResult> { Promise(on: .global(qos: .background)) { fulfill, _ in print("\(#function), start") self.wait(3) .then { _ in let apiResult = ApiResult(message: "success") print("\(#function), end") fulfill(apiResult) } } } struct ApiResult: Codable { var message: String enum CodingKeys: String, CodingKey { case message } } The Swift Language version in the build settings is 5.0. The console output when running the above code is as follows: When built with Xcode 15.4: 2025/03/21 10:10:46.248 callApi(), start 2025/03/21 10:10:46.248 wait 3.0 sec 2025/03/21 10:10:49.515 callApi(), end 2025/03/21 10:10:49.535 getDeviceInfo(), first apiResult: ApiResult(message: "success") 2025/03/21 10:10:49.535 callApi(), start 2025/03/21 10:10:49.536 wait 3.0 sec 2025/03/21 10:10:52.831 callApi(), end 2025/03/21 10:10:52.832 getDeviceInfo(), second apiResult: ApiResult(message: "success") The process proceeds from #1 to #2 after completing the code comment in #1. When built with Xcode 16.2: 2025/03/21 09:45:33.399 callApi(), start 2025/03/21 09:45:33.400 wait 3.0 sec 2025/03/21 09:45:36.648 callApi(), end 2025/03/21 09:45:36.666 getDeviceInfo(), first apiResult: ApiResult(message: "success") 2025/03/21 09:45:36.666 callApi(), start 2025/03/21 09:45:36.666 wait 3.0 sec 2025/03/21 09:45:36.677 getDeviceInfo(), second apiResult: Pending: ApiResult 2025/03/21 09:45:39.933 callApi(), end The process does not wait for the code comment in #1 to finish and outputs the #2 print statement first. Additionally, even with Xcode 16.2, when changing the #2 line to "print("(#function), second apiResult: (apiResult.message)")", the output becomes as follows. From this, it seems that referencing the ApiResult type, which is not a String, might have some effect on the behavior. 2025/03/21 10:05:42.129 callApi(), start 2025/03/21 10:05:42.131 wait 3.0 sec 2025/03/21 10:05:45.419 callApi(), end 2025/03/21 10:05:45.437 getDeviceInfo(), first apiResult: ApiResult(message: "success") 2025/03/21 10:05:45.437 callApi(), start 2025/03/21 10:05:45.437 wait 3.0 sec 2025/03/21 10:05:48.706 callApi(), end 2025/03/21 10:05:48.707 getDeviceInfo(), second apiResult: success Thank you in advance

I have a problem with the enrollment to Apple Developer program, because the page show the message "Your enrollment in the Apple Developer Program could not be completed at this time", I have 1 week watting for any news for the Send Files to Apple Support but not yet any new news. What I can do about this case?

We are experiencing networking issues in our iOS application when it is built with Xcode 16 or later. Our app includes a video conferencing feature that works reliably when built with Xcode 15 or earlier — we can sustain hour-long video sessions without interruption. However, when the app is built using Xcode 16 or higher, network connections drop after 2–3 minutes during a session. This triggers an auto-reconnect, which succeeds, but the connection drops again after another 2–3 minutes. This loop continues indefinitely. Key Details: The issue only occurs in TestFlight builds. When running the app via Xcode debugger, the issue does not occur. The issue is consistently reproducible in TestFlight builds created with Xcode 16 or later. TestFlight builds created with Xcode 15 do not exhibit this issue. All the videoconferencing runs on C and C++ code What We’ve Tried: Reviewed Xcode 16+ release notes but found no relevant changes or deprecations. Verified app configuration and entitlements. Confirmed that no app-side changes occurred between the working and broken builds. Request: We’re seeking guidance on what changes in Xcode 16+ could be affecting networking behavior in release/TestFlight builds. Any insight into relevant build settings, compiler changes, or runtime behavior differences would be greatly appreciated. Thank you in advance for your assistance.

Hello, I've noticed that many people on the forum are experiencing issues enrolling in the Apple Developer Program. I’m facing the same problem—I can't complete my enrollment using my MacBook Pro. When I try to enroll through the Apple Developer app, I get an error saying, "Enrollment through the Apple Developer app is not available for this Apple ID." So, I tried using Safari instead. I submitted all my personal information and credit card details and initiated the order. However, no transaction was processed from my bank account, and I received an email stating that I would be notified when my order and items are ready. When I check the Apple Developer portal, my enrollment status is Pending, and I see a message prompting me to complete the purchase, as if I need to make a new payment. I don’t understand why Apple makes it so complicated just to subscribe to the Developer Program. Why can’t I use my MacBook Pro for enrollment? Why does the Developer portal ask me to complete the purchase even though I already submitted my payment details? Why is the process so confusing? Any help or clarification would be greatly appreciated. Thanks!