I failed to download Metal toolchain for Xcode Beta 5. Downloading in Settings -> Components didn't work so I tried in terminal but didn't work too. /tmp xcodebuild -downloadComponent metalToolchain -exportPath ~/Downloads Beginning asset download... 2025-08-07 16:38:44.867 xcodebuild[91064:2244768] Writing error result bundle to /var/folders/bb/xtdv2kgn6rq3zxqs4f8f1j4w0000gn/T/ResultBundle_2025-07-08_16-38-0044.xcresult xcodebuild: error: Failed fetching catalog for assetType (com.apple.MobileAsset.MetalToolchain), serverParameters ({ RequestedBuild = 17A5295f; })

Hello everyone, I’m looking for some guidance to see if anyone has experienced a similar issue with the Apple Developer Program membership. About one week ago, I completed the payment for the membership. I received an email with the subject: We’re processing your order Wxxxxxxxxxx That email included the order details and cost, and shortly after that, I also received the CFDI invoice for the payment, so the charge appears to have been completed successfully. However, up to now: I have not received any membership confirmation email The membership does not appear under Subscriptions in my Apple ID It is not active in the Apple Developer app On the Apple Developer website, I still see the usual message as if the membership was not purchased: “Purchase your membership to continue your enrollment. Buy today” I understand Apple mentions that the purchase may take up to 48 hours to process, but it has now been more than a week with no changes. Has anyone else encountered this situation? Is it normal to receive the invoice but not have the membership activated? Would you recommend contacting Apple Developer Support at this point? Thanks in advance for any help or shared experiences.

I am facing a recurring issue with Xcode iOS simulator. I want to preview a SwiftUI for iOS in Xcode, but the Simulator app fails to boot up. I receive the follow error in Xcode: Cannot Preview in this file. Simulator was shutdown during an update. I have tried the following: Deleting Xcode cache Reinstalling iOS Simulator runtimes Completely uninstalling Xcode and deleting all developer data, then reinstalling None of the above steps fix the problem. The only fix I have found is to completely reinstall MacOS 15.4.1. THIS IS TERRIBLE! I have already reinstalled MacOS 15.4.1 once to fix the issue, and I don't want to do it again. If there is another solution, please help me find it! Thank you!!

Xcode 16.3 build on ios18.4 ,app can't launch. Then lost connection to the debugger . but Xcode16.3 with ios18.3 can launch

We started seeing an access issue today when attempting to go to the Xcode Cloud tab in App Store Connect. When you navigate to https://appstoreconnect.apple.com/teams/:teamId/apps/:appId/ci we're seeing the following message: The page you’re looking for can’t be found. The page you’re looking for does not exist, or you do not have permission to view it. I am the account holder so it shouldn't be a permissions issue. Is there an ongoing outage or problem in Xcode Cloud? And, if so, where can I monitor this accurately?

Several app developers are struggling with the inability to provide a separate app icons that looks nice on older macOS versions while at the same time provide Icon Composer icons that look great on macOS Tahoe 26. An ability to provide separate icons is super important to those who have app icons that follow the curvature of the default icon borders (as the corner rounding radius is different for Sequia and Tahoe). Take a look at this for example: https://github.com/ghostty-org/ghostty/issues/7564#issuecomment-3042061547 Question: Is there a definitive/recommended way to address this issue? How can a developer add a glass icon variant that looks good on Tahoe and provide a bitmap icon for older macOS versions? Some background info: Prior to Xcode 26 beta 4, one could add an App Icon to Assets to be used as app icon for legacy macOS versions (Sequia and older) and use a new Icon Composer icon (placed in the project root) for macOS Tahoe 26. Enabling "Include all app icon assets" under target settings ensured that older macOS versions would use the old app icons while Tahoe the new Icon Composer glass one. Since Xcode beta 4 this technique no longer works. Xcode instead insists on populating Assets.car with Icon Composer generated variants, disregarding the App Icon provided in Assets. Although the App Icon in Assets makes its way to a .incs file in the app bundle's Contents/Resources folder, but that is not used by macOS anymore and is there for some compatibility purposes. The Assets.car file (which matters) only contains the variants generated by Icon Composer and does not contain the png icons provided in the Assets.

Hello. I'm seeing an inconsistent behavior where breakpoints I set in my (Swift) iOS app behave normally when I'm debugging on a device or on a simulator running iOS 17.x, but when I try using simulators of iOS 16 or 15 the breakpoints get ignored completely. I also observe that the breakpoints remain solid blue and do NOT adopt the dotted blue outline, as experienced by other users. I've seen a few posts on here and on SO about the general issue of ignored breakpoints (with no conclusive answer AFAIK), but I haven't seen any where the behavior varies with the SDK being used. The behavior is repeatable and predictable (within the same app at least). I am not adding the breakpoints after building/running, and I'm sure the logic reaches the lines with the breakpoints (and again, whenever I switch to an iOS 17 simulator, execution does pause as expected with the exact same breakpoints). Things I've tried and looked into: Clean up project build folder Delete and re-install simulators (iOS 16.4 and 15.5) Deleted the entire derived data directory, as well as the CoreSimulator one. Confirm the build configuration is Debug, and the "Debug executable" option is checked. inspect various build flags mentioned in other posts: {Swift compiler - Code generation - Optimization level - Debug: -0none; Debug information format: DWARF (I also tried DWARF with dSYM with no impact)}. Most of my settings are on the plain vanilla/out of the box side, with only a couple of SPM dependencies, and I've been maintaining the same app for about 5 years and don't think I've come across this behavior before. Currently using Xcode 15.1. Deployment target is 14.0. Thank you.

Xcode 16 unindents lines if I choose a code-completion and I cannot find a way to stop this - does anybody know how to stop it? Here's a link to a gif demonstrating this problem - it's incredibly frustrating. https://i.imgur.com/jaDpzpb.gif Thanks in advance

There are at the moment a lot of spams for a bank phone number. https://developer.apple.com/forums/thread/769506 What is really surprising is to read App Store Connect Engineer answer, each time the same: We appreciate your interest in participating in the forums! These forums are for questions about developing software and accessories for Apple platforms. Your question seems related to a consumer feature and is better suited for the Apple Support Communities Is it an automatic answer (I cannot believe anyone who read the post did not notice it was a spam) ? If so, couldn't it simply detect it is a spam (Apple Intelligence could come to help) and delete the message (or the account) ? PS: it would also be a spam in Apple Support Communities PS2: I note the message has been deleted very rapidly.

I am setting up a new app and am having problems with Xcode Cloud. From Xcode if I click on the "Cloud" button under the Report Navigator I get a spinner for a long time then get the message "Could not load Xcode Cloud data". I also visited the "Xcode Cloud" tab under my app in App Store Connect and I get a spinner and nothing loads. This is a recent account and I'm setting up Xcode Cloud for the first time. Below is what I've tried and I'm out of ideas on how to get this working. In Xcode, I signed out and back in as the Account Holder Closed Xcode and reopened This occurred yesterday and today and have not seen a problem under the Apple System Status page On the latest Xcode 16.2 Checked the Signing & Capabilities tab in Xcode and my team a bundle Id is correct and it's happy with signing. At this time on my machine I am using the distribution profile.

We have a macOS application packaged as a .pkg file. To notarize it, we first code-sign individual library folders and the .app bundle using the following command: codesign --force --deep --sign "Developer ID Application: <Our Account Name>, LLC (Team ID)" "Our_product.app" Code Sign result for .app file: Our_prodcut.app: valid on disk Our_product.app: satisfies its Designated Requirement We are using packages tool to create .pkg file with code signed .app file. Steps followed once .pkg file is ready: 1. Product Sign: productsign -sign "Developer ID Installer: <Our Account Name>" output.pkg signed-output.pkg 2. Submit for notorization: `xcrun notarytool submit signed-outout.pkg --keychain-profile "notarytool-password" --wait Received following output: Current status: Accepted................................. Processing complete id: 2d5c450f-5b22-4b4d-9579-ef21c0356548 status: Accepted Transferred Notarization log: xcrun notarytool log 10169892-b28c-407c-b348-edab0b34ef34 --keychain-profile "notarytool-password" Desktop/developer_log_6.json We have observed log with "Accepted" status with issues as "null". 3. Stapler: stapler staple signed-output.pkg stapler validate signed-output.pkg Processing: signed-output.pkg The validate action worked! 4. Checking status of .pkg file: Command: spctl --assess --verbose=4 signed-output.pkg Output: signed-output.pkg: rejected source=no usable signaturess Warning During Installation: While installing the .pkg file, a security warning appears as follows. Please help us to resolve this.

When Xcode 26 Beta 5 compiles my XIBs into NIBs, it spits out a dependency on a class that isn't available pre-macOS 26, named _TtCC6AppKit14NSScrollPocketP33_EC3F85FAB7755D56E669206D2B17725B12BackdropView. All XIBs have a deployment target of macOS 12, so in theory this should be avoided. Even if this is a new (internal) class to macOS 26, the dependency is a problem when the developer is asking to deploy to prior versions. Has anyone else run into this regression? What could possibly be causing the XIB compiler to inject this dependency? The resulting NIBs don't load on anything prior to macOS 26.

Hello everyone, I am encountering a persistent issue with Xcode where I’m unable to install my app on a testing device due to the following error message: Failed to verify code signature of /var/installd/Library/Caches/com.apple.mobile.installd.staging/temp.SznYNY/extracted/iForC.app : 0xe8008018 (The identity used to sign the executable is no longer valid.) Here’s what I have tried so far to resolve this issue: 1. Ensured that all my certificates and provisioning profiles are current and valid. 2. Removed all related certificates from my Keychain and reinstalled new ones. 3. Cleaned and rebuilt the project multiple times. 4. Unpaired the device and paired it again. 5. Reinstalled the latest version of Xcode. 6. Performed a complete restore of my Mac. Despite these troubleshooting steps, I am still facing the same issue. I would greatly appreciate any insights or experiences related to this error from anyone who has overcome similar challenges. Thank you in advance for your help!

We are trying to track down some build failures that started happening only in our Jenkins CI environment. error: Failed to decode version info for '/Applications/Xcode.app/Contents/Developer/usr/bin/actool': The data couldn’t be read because it is missing. (stdout: '<?xml version="1.0" encoding="UTF-8"?> [2025-07-30T19:21:18.479Z] <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> [2025-07-30T19:21:18.479Z] <plist version="1.0"> [2025-07-30T19:21:18.479Z] <dict> [2025-07-30T19:21:18.479Z] <key>com.apple.ibtool.version</key> [2025-07-30T19:21:18.479Z] <dict> [2025-07-30T19:21:18.479Z] <key>bundle-version</key> [2025-07-30T19:21:18.479Z] <string>24112</string> [2025-07-30T19:21:18.479Z] <key>short-bundle-version</key> [2025-07-30T19:21:18.479Z] <string>26.0</string> [2025-07-30T19:21:18.479Z] </dict> [2025-07-30T19:21:18.479Z] </dict> [2025-07-30T19:21:18.479Z] </plist> [2025-07-30T19:21:18.479Z] ', stderr: '' Key facts we've noted: Locally I cannot reproduce the problem We did not see this problem with previous Xcode 26 betas If I remote into the machine and run build commands from the command line I cannot reproduce the problem The very first build succeeds, every build after that on this machine fails from jenkins actool --version is spitting out the version information for ibtool, but only in the context of running from a jenkins agent. If I run this locally or if I remote into the CI machine and run this from the terminal I cannot reproduce this behavior. Command line tools appear to be installed, xcode-select --install fails if I try to do it from the command line. We've tried to recreate the build agents for this jenkins environment exactly as they were for all previous betas and xcode versions, and still get this behavior.

Hello, I am writing this post because the Apple Developer Program enrollment process is clearly malfunctioning, and I have reached a point where this situation is unacceptable. First payment I initially purchased the Apple Developer Program on December 3rd, 2025 at 16:03 (Turkey time). The payment was fully completed, confirmed by my bank, and I received the official Apple Store receipt. • Order ID: W1557478965 • Amount: 1029 TRY • Status: Completed / Posted Despite this, my account continued to show: • “Purchase your membership” • Enrollment status: Pending • No access to App Store Connect After several days with no response from Apple Support and no activation, I assumed something had gone wrong on Apple’s side. Second payment Because I was completely blocked and received no reply from support or the forums, I made a second payment to rule out any payment failure. • Order ID: W1694587309 • Amount: 1029 TRY • Status: Completed / Posted Current situation At this point: • Two separate payments • Two unique Apple Store order IDs • Zero activation • Zero response from Apple Support • Enrollment still Pending • App Store Connect still inaccessible Support case details: • Apple Support Case ID: 102769533427 • Multiple follow-ups sent • No reply • No action taken This is no longer a delay — this is a system-level failure. I have paid twice for a single Developer Program membership and received nothing in return: no activation, no explanation, and no support. I am formally requesting manual intervention by Apple staff to: 1. Immediately activate my Apple Developer Program membership 2. Investigate and resolve the duplicate payment (refund or clarification) 3. Explain why a paid enrollment can remain blocked with no support response If this forum is monitored by Apple employees, this issue requires urgent escalation. This situation should not happen in a paid developer program. Thank you.

I have a project that leverages XPC and has interoperability between Swift and Objective-C++. I am presently getting a compile-time error in one of our unit test targets, of "Argument passed to call that takes no arguments" on the following code: let interface = NSXPCInterface(with: XPCServiceDelegate.self) My XPCServiceDelegate protocol is defined as: @objc(XPCServiceDelegate) public protocol XPCServiceDelegate { //... } For the longest time, this code has compiled successfully, and it has not recently changed. There are two confusing things about this error. The first is that I have a different build scheme that will compile correctly other code with the same structure. The other is that I have team members that are able to compile my failing scheme successfully on the same XCode version, OSVersion, and branch of our repository. I've attempted numerous things to try to get this code to compile, but I've run out of ideas. Here's what I've tried: Clean build both on XCode 16.4 and XCode 26 Beta Delete DerivedData and rebuild on XCode 16.4 and XCode 26 Beta Delete and re-clone our git repository Uninstall and reinstall XCode Attempt to locate cached data for XCode and clear it out. (I'm not sure if I got everything that exists on the system for this.) Ensure all OS and XCode updates have been applied. The interface specification for NSXPCInterface clearly has an initializer with one arguement for the delegate protocol, so I don't know why the compiler would fail for this. Is there some kind of forward declaration or shadowing of NSXPCInterface? Do you have any ideas on what I could try next?

Today's Xcode release won't download the visionOS SDK, gives a 'network error'.

Xcode 26.2 RC has been out for over 24 hours and it's still not possible to submit apps.

Hello When I tried to enroll for Apple developer program, I got message like Your enrollment could not be completed. "Your enrollment in the Apple Developer Program could not be completed at this time." And i am not able to proceed payment page anymore . Apple consultant also don’t know main problem that bother me. Is anybody solve this problem??? Is waiting most proper answer?? Thanks

Ever since Xcode 15 and iOS 17 came out development has quite often been a nightmare of waiting and waiting -Xcode displaying endless circles saying preparing the device, connecting to the device, installing the device. But recently to add to this, installation and launching is just taking really forever. I'm currently running Xcode 15.1 and various versions of iOS 17 (I have several phones) and installing the app from Xcode takes about 7 - 10 minutes (compared to the same app installing in seconds with Xcode 14 for example). Then once its finally installed, it then takes further minutes to launch, Xcode often actually displays a dialog saying its taking longer than expected to launch the app, adding the footnote "LLDB is likely reading from device memory to resolve symbols." What could be reasons, and solutions, for the excruciatingly slow installation time, and launch time? I really need to find a solution to this please - making a code change tweak, running, making another, running, making another, running, just isn't possible given the length of time it takes to install and launch each time. The iPhone is connected via physical cable to the Mac, and the Mac and iPhone are both on the same Wifi network. Xcode 15.1 M1 Macbook Pro Sonomo 14.0 iOS 17.2