I encountered this issue with an app I'm writing that accepts arguments. With some troubleshooting I've determined that this is an inherent behaviour in how Xcode 16 compiles SwiftUI apps and how macOS 15 launches them. The issue: Launching the app as open /Applications/AppName.app --args --arg1 --arg2 --arg3 etc should allow the app to process the arguments as CommandLine.arguments and this is still the case. How the app sees arguments is unchanged and doesn't matter if you use CommandLine.arguments or swift argument parser or don't have arguments at all. This will affect any SwiftUI app as I'll demonstrate below. The problem is that if you use a mix of arguments as --arg value pairs or --arg as a flag, then depending on the order the arguments are provides, the app won't launch properly. The icon will appear in the dock but no window appears until you click the icon in the dock. (BTW, having "Application is agent (UIElement)" set to YES in the Info.plist makes this task rather difficult.) In testing if you use all flags, it's fine. if the flags are in pairs, it's fine. if you have one flag and then a --arg value pair, you will see the issue. If you reverse the order so the flag is after then it works fine. How to replicate: On macOS 15 and Xcode 16 Open Xcode Create a new macOS App (called demoapp in my example) Select SwiftUI as the interface Build That it. Don't add anything and just build the boilerplate hello world app that Xcode makes for you. Once that's built, cd to your /Build/Products/Debug/ directory in terminal and try the following (this happens if you build for release as well): note, the app window will display when you click the icon in the dock, just not on initial launch # three single arguments open ./demoapp.app --args --foo --bar --baz # App window displays as expected # one single argument, one arg value pair open ./demoapp.app --args --foo --bar baz # The app window will not appear. # same arguments as before but the single argument is after the arg value pair open ./demoapp.app --args --bar baz --foo # App window displays as expected # arg[1] without `-` or `--` prefix open ./demoapp.app --args foo --bar --baz # The app window will not appear. # arg[1] and arg [2] without prefix open ./demoapp.app --args foo bar --baz # The app window will not appear. # single - in front of the first two arguments open ./demoapp.app --args -foo -bar baz # The app window will not appear. # single - in front of the first three arguments open ./demoapp.app --args -foo -bar -baz bob # App window displays as expected No idea what is going on but I suspect macOS does some pre-processing before launching the app, for example you can do stuff like open /Applications/SomeApp.app --args -AppleLanguages '(de)' to run using a specific language. I presume the OS is pre-processing arguments before launching the app proper. If I compile the app using Xcode 15.4 then this issue is not present. Also Apps compiled with Xcode 16 do not exhibit the issue on macOS 14 or earlier. It's a specific Xcode 16, macOS 15 thing in the way the app is compiled that makes it behave this way. I hope I've explained it correctly, but it's very easy to replicate. I filed a feedback for it (under a different apple account), FB15577018. Any insight into what's going on here would be helpful. Also if there's any compiler flags I could be setting. In my actual project, I'm not making any other changes. The same code compiled under Xcode 16 (.0 or .1RC) behaves differently to Xcode 15.4.

For my app Find Any File, of which both releases and TestFlight betas were released many times, the TestFlight page tells me that several users have submitted crash reports. And I'm sure the same is true for the MAS releases: (Yes, this shows quite recent ones, but I've seen similar supposed crash report submits in this list before.) However, the actual "Crashes" listing on the appstoreconnect sites hasn't show any new crash reports for many months now: (This is the entirety of crash reports I can get listed, even when removing all filters.) Something appears to be stuck, on Apple's end. The same issue is with Xcode's Organanizer window, for "Crashes": It also used to list only the same very old reports and nothing since May 2024. And just now, when I retried this in Xcode, I'm shown a weird error message I never saw before: Error Downloading Crashes List An error occurred… Access Restricted with adam id: 1207815783 And yes, I'm logged in just fine, under Prefs / Accounts. How am I going to get this investigated? I had already sent an email about this to the Review team, who didn't react to it at all. DTS is only for Code level support, which this isn't. Any help?

I want to release a Framework F, containing several other frameworks (such as Realm, Appetitive, Cocoalumberjack, PhoneNumberKit) for use by app A. According to this article: https://medium.com/@bittudavis/how-to-create-an-umbrella-framework-in-swift-ca964d0a2345 They write, without referencing a source: "Although Apple discourage creating umbrella framework". Is that true, do Apple discourage umbrella frameworks, if so why and is it a very strong discourage or a mild one? If not discouraged, then how can this be achieved with Xcode 16? I've been attempting to follow a few tutorial to achieve this, such as https://medium.com/john-lewis-software-engineering/adding-a-third-party-framework-inside-a-first-party-framework-in-xcode-3ba58cfd08da however so far without any success. This last article mentions the Link Binary With Libraries section, which doesn't exist in Xcode 16. There's the Frameworks, Libraries, and Embedded Content section where I have been attempting to add the frameworks into my Framework F (choosing Embed without Signing). I'm able to successfully build Framework F, but when app A attempts to use it (adding F to the Frameworks, Libraries, and Embedded Content section with option embed and sign, or embed and don't sign, makes no difference) then I get run time errors about the umbrellaed frameworks not being able to be found.

Hello Apple Support, I’m facing an issue with Background Fetch in my React Native project. When I click on Simulate Background Fetch in Xcode, everything works as expected on the iOS Simulator—background tasks run smoothly, and data is fetched without issues. However, on a real device, the app goes to the background but doesn’t execute any of the scheduled background tasks, and it also remains in the background without terminating. Here’s some additional context: React Native Project: I’m using React Native to develop this app, and the background tasks involve: Getting User Location: Fetching the user’s location in the background. API Calls: Calling an API to fetch necessary information based on the user’s location. Scheduling Notifications and Alarms: Scheduling notifications and alarms based on the API response data. Simulator vs. Real Device: In the iOS Simulator, all these background tasks trigger and function correctly when I simulate Background Fetch. On the real device, however, none of these tasks are triggered when I try to simulate Background Fetch. The app only moves to the background without performing any tasks or getting terminated. Device and Configuration Details: iOS Version: 17 Device Model: Iphone xs, Iphone 11, iphone 7 Background Modes: Background Fetch is enabled in Capabilities, and I’ve set the fetch interval to the minimum for testing. I’ve verified that all configurations are correctly set, and I’ve tried restarting the device and Xcode, but the issue persists. Is there something specific about Background Fetch that could prevent it from functioning as expected on physical devices? Any guidance on troubleshooting or additional steps would be highly appreciated. Thank you!

I am reaching out regarding an issue with renewing my Apple Developer membership. For the past two days, I have been in contact with support but am still unable to view the renewal options under my Apple Developer account. Additionally, I am not seeing an option to initiate a call when selecting "Program Purchase and Renewal" as the category for support assistance. Could you please assist in resolving this issue? Access to the renewal option is critical for maintaining our development processes, and I would appreciate any guidance or escalation that might expedite a resolution. Thank you for your attention to this matter.

For un unknown reason, my Apple ID has been blocked. Since I can not connect anymore to my developer account ! I've asked to unblock it (iforgot.apple.com) but according to support the unblock sequence is not send because this Apple ID is in used. I need help to unblock my ID in order to manage my app.... note : I use an another account to post this messages.

I'm encountering an issue while trying to enroll in the Apple Developer Program using the mobile app. Every time I attempt to proceed, I receive the following error message: "There may be an issue with your account that needs to be resolved before you can continue." I have verified my account information and followed all the necessary steps. I sent an email to Apple, but I haven’t received a response for several days. I’d be grateful for any help if anyone else has experienced this issue.

I add the following info in the build settings of my app. Then I also add the icon to my asset. I build the app, it works normally, but I notice that when I changed the icon to 'AppIcon-Defaults', The icon change alert didn't appear. but it succeeds . I uploaded the archive to App Store I got: ITMS-90895: Missing Icon - The Info.plist key CFBundleIcons.CFBundleAlternateIcons contains an entry “AppIcon-Defaults” that references asset “AppIcon-Defaults.” No such asset is present in the asset catalog. Then I use xcrun --sdk iphoneos assetutil --info Assets.car to check the assets inside the archieved app, It have the asset.

I recently change from Individual to Organization and waiting approval from apple. Apple kindly please approve my changes so that I could submit my APP immediately. Thanks for this platform.

I'm trying to create a preview for my live activities when it's stale, so I created a preview provider. I followed some examples, but XCode says I'm missing preview context. Am I doing something wrong? I tried adding .previewContext(WidgetPreviewContext(family: .systemSmall)) but that doesn't seem to work.

Looking for advice: I've been automatically rejected from Apple's Developer Program without an explanation. Hi everyone, It seems I’ve hit a brick wall, so I’m reaching out to see if anyone here has experienced something similar to this or has any advice or resources to share. I recently attempted to enroll in the Apple Developer Program, but my application was immediately denied after submission. Within one second of submitting my driver’s license, the app stated that Apple was unable to verify my identity and that I needed to reach out to Developer Support for further assistance. When I first contacted Developer Support for clarification, the representative was happy to help. After being taken off hold, she said she couldn't offer any more information, but assured me that I'd later receive an email with further details related to my account and next steps. However, instead of steps to resolve the issue, I received a denial email repeating the same message about being unable to verify my identity (screenshot attached). I’ve since spoken to multiple representatives and supervisors, and, while everyone was initially polite and understanding, it changed after I was taken off hold. Here’s what I’ve been told: The decision is final, and there is no possibility of escalation or appeal. The supervisors themselves, despite being the final decision makers, have no access to the specific reason for applicants’ denial and, thus, could not provide any additional details. I was also invited to join Apple's “Xcode program,” which I found out just means they’ll allow me to buy Xcode from the app store and use it without a developer account (I already do that). Every time a support representative reread the sentence about being “unable to verify [my] identity,” I responded by offering to provide additional forms of identification. However, that offer was never addressed. The last senior advisor I spoke with stated to me over the phone that: She was the highest authority on the matter. There was absolutely no way to escalate the issue further; it was 100% impossible. She physically did not have access to the reason for my denial. Neither she nor anyone else at Apple was able to offer further assistance. I asked this senior advisor to send me an email with the above points in writing, which she said she would do. However, the email I received was a virtual copy-paste of the email from the first support representative, stating the same few sentences verbatim. This has left me deeply confused, especially as no specific reason for denial has been shared, and since I was explicitly denied any opportunity to address (or even get information on) potential issues. I’d like to ask this community: Has anyone else experienced this sort of immediate rejection and/or a refusal to disclose the reason for that rejection? Are there specific guidelines or policies I may have unknowingly violated that I should review? If so, what could be the reason why they’re being withheld from me? Are there any resources or alternative channels I can explore to resolve this issue? I’m so thoroughly confused, and I’m genuinely at a loss with how to move forward. I appreciate any insight or guidance from this community. Thanks so much for taking the time to read! Best regards, David

We've encountered a critical issue with the new linker of CLT16 (version 16.1.0.0.1.1729049160) that prevents proper initialization of BLOCK DATA. BLOCK DATA are used to initialize global variables in our Fortran code, and its failure to initialize those variables leads to a program crash. This affects our community of more that thousand scientists worldwide. The current workaround is using the -ld_classic linker option. However, this option is deprecated and will be removed in a future release, as described in the Xcode release note. I've attached a minimal example that reproduces the problem using GNU gfortran with the following instructions (the attached main.f.txt and bd.f.txt need to be rename to main.f and bd.f, respectively): gfortran -c bd.f gfortran -c main.f ar rv libtest.a bd.o main.o gfortran -ld_classic -o good.x -L. libtest.a gfortran -o bad.x -L. libtest.a Running the two programs, one can see that the BLOCK DATA are not initialised without the option ld_classic, $ > ./good.x 3.7273802569289098 2.8083922366048202 $ > ./bad.x 0.0000000000000000 0.0000000000000000 We kindly request your attention to this matter and a prompt solution or alternative workaround. Best regards main.f.txt bd.f.txt part.txt

Hello, I am using Xcode 16.1 (16B40) on MacOS Sequoia 15.1.0 using a Macbook pro M1 Max I am developing an app for iOS 17 and 18 using SwiftUI I created UITests to take the screenshots for the appStore on the simulator The tests run well and all of them are succeded The problem appears when I try to get the screenshot files from the xcresult files after the test. There is not any screenshot inside it. I found a data folder and a Info.plist file. In the data folder there are a lot of files with this pattern data.03zD4C6IGFFthK14NwA8mNvcwFHT16g6Tl40Tl1YmBC1bNh6d0YIcnWKyUaQPDXoa8fYo6C3Xcv8xvMtE3_NEXA== and other files with this pattern refs.03zD4C6IGFFthK14NwA8mNvcwFHT16g6Tl40Tl1YmBC1bNh6d0YIcnWKyUaQPDXoa8fYo6C3Xcv8xvMtE3_NEXA== Ok, I tryed to use fastlane to automatize the screenshots but the problem is still present. The xcresult files have not any png file. I had no problems doing this action (getting screenshots from a xcresult file) in previous versions of MacOS and Xcode in my current machine. I just updated my machine to MacOS Sequoia 15.1.1 and the problem is still present Honestly I don't know how to fix this situation. With Xcode 15 I had not any problem with that but I am not sure if Xcode 16.0 was runing without problems because I didn't need to use this functionality in those months Here is my code for a UITest: import XCTest final class ScreenshotsUITests: XCTestCase { let app = XCUIApplication() let device = "iPhone16" override func setUpWithError() throws { continueAfterFailure = true } override func tearDownWithError() throws {} @MainActor func testEnglishScreens() throws { let lang = "en" app.launchArguments.append("UITestMode") app.launchArguments += ["-AppleLanguages", "(en)"] app.launchArguments += ["-AppleLocale", "en_US"] app.launch() executeTestsForMenus(lang: lang, backLabel: "Back") executeTestForMatch(lang: lang) } @MainActor func testSpanishScreens() throws { let lang = "es" app.launchArguments.append("UITestMode") app.launchArguments += ["-AppleLanguages", "(es)"] app.launchArguments += ["-AppleLocale", "es_ES"] app.launch() executeTestsForMenus(lang: lang, backLabel: "Atrás") executeTestForMatch(lang: lang) } private func executeTestForMatch(lang: String) { let startButton = app.buttons["start-button"] startButton.tap() let key4 = app.buttons["key-4"] XCTAssertTrue(key4.waitForExistence(timeout: 30), "Key 4 in match screen is not found") key4.tap() let key2 = app.buttons["key-2"] XCTAssertTrue(key2.exists, "Key 2 in match screen is not found") key2.tap() makeScreenShot("playing", lang: lang) let closeButton = app.buttons["close-button"] XCTAssertTrue(closeButton.exists, "Close button in match screen is not found") closeButton.tap() } private func executeTestsForMenus(lang: String, backLabel: String) { let mainHeader = app.staticTexts["Math match"] XCTAssertTrue(mainHeader.exists, "Header in main screen is not found") makeScreenShot("mainMenu", lang: lang) let settingsButton = app.buttons["settings-button"] XCTAssertTrue(settingsButton.exists, "Settings button in main screen is not found") settingsButton.tap() makeScreenShot("Settings", lang: lang) let backButton = app.buttons[backLabel] XCTAssertTrue(backButton.exists, "Back button in match screen is not found") backButton.tap() let helpButton = app.buttons["help-button"] XCTAssertTrue(helpButton.exists, "Help button in main screen is not found") helpButton.tap() makeScreenShot("Help", lang: lang) backButton.tap() let scoreButton = app.buttons["score-button"] XCTAssertTrue(scoreButton.exists, "Scores button in main screen is not found") scoreButton.tap() makeScreenShot("Scores", lang: lang) backButton.tap() let playButton = app.buttons["play-button"] XCTAssertTrue(playButton.exists, "Play button in main screen is not found") playButton.tap() makeScreenShot("matchBuilder", lang: lang) let startButton = app.buttons["start-button"] XCTAssertTrue(startButton.exists, "Start button in match builder screen is not found") } private func makeScreenShot(_ name: String, lang: String) { takeScreenshot(app, named: "\(lang)-\(name)-\(device)") } } import XCTest extension XCTestCase { func takeScreenshot(_ app: XCUIApplication, named name: String, fullScreen: Bool = false) { let screenshot: XCUIScreenshot if fullScreen { screenshot = app.windows.firstMatch.screenshot() } else { screenshot = XCUIScreen.main.screenshot() } let screenshotAttachment = XCTAttachment( uniformTypeIdentifier: "public.png", name: "screenshot-\(name).png", payload: screenshot.pngRepresentation, userInfo: nil) screenshotAttachment.lifetime = .keepAlways add(screenshotAttachment) } } and here is the content of my testplan file: { "configurations" : [ { "id" : "35BC7C0B-9A5A-4027-9F30-36958C4C1AAF", "name" : "Test Scheme Action", "options" : { "preferredScreenCaptureFormat" : "screenshot", "testExecutionOrdering" : "random", "uiTestingScreenshotsLifetime" : "keepAlways", "userAttachmentLifetime" : "keepAlways" } } ], "defaultOptions" : { "targetForVariableExpansion" : { "containerPath" : "container:myAppProject.xcodeproj", "identifier" : "B27D1B022CA00314001A259B", "name" : "MyAppProject" } }, "testTargets" : [ { "parallelizable" : true, "target" : { "containerPath" : "container:MyAppProject.xcodeproj", "identifier" : "B27D1B122CA00315001A259B", "name" : "MyAppProjectTests" } }, { "parallelizable" : true, "target" : { "containerPath" : "container:MyAppProject.xcodeproj", "identifier" : "B27D1B1C2CA00315001A259B", "name" : "MyAppProjectUITests" } } ], "version" : 1 } I made tests with old projects in my machine and those projects have the same problem with screenshot files in the xcresult bundles I don't know if the problem is in my machine, my Xcode, MacOS or other ting. I don't know how to fix this problem Please, can anyone help me? Thanks in advance

I have a SwiftUI app that I've been working on in XCode 16.1. The project builds and runs in the simulators, on my mac and on my iPhone/iPad without any issues. I'm also able to build my unit test project and run them without any errors. The project has zero warnings in it. When I go to the Edit Schemes options and change the Run scheme to be a Release build with the Debug Executable unchecked I get a compiler error: Command SwiftCompile failed with a nonzero exit code I've attempted this Release Run with the following target devices in XCode: My iPhone 15 Pro Max (iOS 18.2 Beta 3) MacBook Air (M1) (15.2 Beta) iPhone 16 Simulator (iOS 18.1) Any iOS Simulator Device (arm64, x86_64) All 3 of these target have the same issue. Normally I would just debug the error from the logs but when I look at the build output I can't see any information in the log to tell me what happened. It looks like the source files are sent into the SwiftCompiler and the compiler fails without bubbling up the issue. I've provided the full error log export as a Gist HERE due to it's size. Is there anything in the log I'm missing? Is there a way for me to turn on more verbose logging during compilation of a Release Build? I created a brand new Multiplatform App in XCode and I added all of my source files to it. No project configuration settings were changed. I could build it successfully with the debug configuration. I then changed it to the Release configuration and experienced the same error. I can create another fresh project and make the same release configuration with none of my source files in it and get a successful build. I t seems there is something wrong with my source files and the release configuration but the compiler doesn't indicate what. I'm lost at this point as I can't figure out how to get a release build and can't seem to find any indication as to why.

Your enrollment could not be completed. Your enrollment in the Apple Developer Program could not be completed at this time.

I'm trying to enroll in the Apple Developer Program, but I keep encountering this error message: "Your enrollment in the Apple Developer Program could not be completed at this time." Initially, I tried using a newly created Apple ID, and when that didn’t work, I attempted it with my older Apple ID. Unfortunately, I received the same error both times. Has anyone experienced this issue or knows what might be causing it? Any insights would be greatly appreciated!

There are at the moment a lot of spams for a bank phone number. https://developer.apple.com/forums/thread/769506 What is really surprising is to read App Store Connect Engineer answer, each time the same: We appreciate your interest in participating in the forums! These forums are for questions about developing software and accessories for Apple platforms. Your question seems related to a consumer feature and is better suited for the Apple Support Communities Is it an automatic answer (I cannot believe anyone who read the post did not notice it was a spam) ? If so, couldn't it simply detect it is a spam (Apple Intelligence could come to help) and delete the message (or the account) ? PS: it would also be a spam in Apple Support Communities PS2: I note the message has been deleted very rapidly.

So I can see from the documentation that XCTAssertEqual(x, y) becomes #expect(x == y), but what about XCTAssertEqual(x, y, accuracy: 0.2)? Does something already exist or do we need to write a more involved statement to see if x is less than y plus z and more than y minus z?

Anyone else notice that Xcode 16.1 seems to have stopped building universal binaries for both debug and release builds even though under "Build Settings-Build Active Architecture" both Debug and Release are set to NO. We had been using the universal binary builds out of Debug for preliminary tests on Intel based machines. The Architectures setting is set to: Standard Architectures (Apple Silicon, Intel) - $(ARCHS_STANDARD). I started a brand new empty app and it does the same thing. A workaround is to set the Destination in Xcode's menu bar to "Build on Any Mac" and then find the binary and drag it to the Intel computer. You can't run that one though from Xcode. Another workaround is to build an Archive and drag that one.

They said something like hold option or whatever but It didn't seems to work with me...