My application always crashes at the same position when I open it on my iPad Air. It doesn't crash in debug mode which makes it very difficult for me to find the issue. My crash report from TestFlight: Exception Subtype: KERN_INVALID_ADDRESS at 0x000000016d5f26f0 Exception Codes: 0x0000000000000001, 0x000000016d5f26f0 VM Region Info: 0x16d5f26f0 is not in any region. Bytes after previous region: 546219761 Bytes before following region: 399632 REGION TYPE START - END [ VSIZE] PRT/MAX SHRMOD REGION DETAIL MALLOC_LARGE 14c000000-14cd08000 [ 13.0M] rw-/rwx SM=PRV ---> GAP OF 0x2094c000 BYTES Stack Guard 16d654000-16d658000 [ 16K] ---/rwx SM=NUL Termination Reason: SIGNAL 4 Illegal instruction: 4 Terminating Process: ProjectiOS [745] Triggered by Thread: 0 Thread 0 name: Thread 0 name: Thread 0 Crashed: 0 ProjectiOS 0x0000000107abf3b4 0x1026ac000 + 88159156 1 ProjectiOS 0x000000010e7d3be4 0x1026ac000 + 202537956 2 ProjectiOS 0x000000010e96c45c 0x1026ac000 + 204211292 3 ProjectiOS 0x000000010e96cadc 0x1026ac000 + 204212956 4 ProjectiOS 0x000000010e7d7ba4 0x1026ac000 + 202554276 5 ProjectiOS 0x00000001079cccc0 0x1026ac000 + 87166144 6 ProjectiOS 0x000000010945f33c 0x1026ac000 + 115028796 7 ProjectiOS 0x000000010945b648 0x1026ac000 + 115013192 8 ProjectiOS 0x0000000109458510 0x1026ac000 + 115000592 9 ProjectiOS 0x0000000107530430 0x1026ac000 + 82330672 10 ProjectiOS 0x0000000109459290 0x1026ac000 + 115004048 11 ProjectiOS 0x0000000109457584 0x1026ac000 + 114996612 12 ProjectiOS 0x00000001094b961c 0x1026ac000 + 115398172 13 ProjectiOS 0x00000001094bb8a0 0x1026ac000 + 115407008 14 ProjectiOS 0x00000001094c0340 0x1026ac000 + 115426112 15 ProjectiOS 0x000000010971e698 0x1026ac000 + 117909144 16 ProjectiOS 0x000000011104f7a4 0x1026ac000 + 244987812 17 QuartzCore 0x00000001879f4548 CA::Display::DisplayLinkItem::dispatch_(CA::SignPost::Interval<(CA::SignPost::CAEventCode)835322056>&) + 64 (CADisplay.mm:6671) 18 QuartzCore 0x00000001879d1c64 CA::Display::DisplayLink::dispatch_items(unsigned long long, unsigned long long, unsigned long long) + 880 (CADisplay.mm:5794) 19 QuartzCore 0x00000001879e5394 CA::Display::DisplayLink::dispatch_deferred_display_links(unsigned int) + 360 (CADisplay.mm:4886) 20 UIKitCore 0x000000018c936afc _UIUpdateSequenceRunNext + 128 (_UIUpdateSequence.mm:189) 21 UIKitCore 0x000000018c935f8c schedulerStepScheduledMainSectionContinue + 60 (_UIUpdateScheduler.m:1197) 22 UpdateCycle 0x000000027364b560 UC::DriverCore::continueProcessing() + 84 (UCDriver.cc:288) 23 CoreFoundation 0x0000000186f8c4cc __CFMachPortPerform + 168 (CFMachPort.c:604) 24 CoreFoundation 0x0000000186fbc0b0 __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE1_PERFORM_FUNCTION__ + 60 (CFRunLoop.c:2045) 25 CoreFoundation 0x0000000186fbbfd8 __CFRunLoopDoSource1 + 508 (CFRunLoop.c:2184) 26 CoreFoundation 0x0000000186f93c1c __CFRunLoopRun + 2168 (CFRunLoop.c:3205) 27 CoreFoundation 0x0000000186f92a6c _CFRunLoopRunSpecificWithOptions + 532 (CFRunLoop.c:3462) 28 GraphicsServices 0x000000022790d498 GSEventRunModal + 120 (GSEvent.c:2049) 29 UIKitCore 0x000000018c956ba4 -[UIApplication _run] + 792 (UIApplication.m:3902) 30 UIKitCore 0x000000018c8ffa78 UIApplicationMain + 336 (UIApplication.m:5577) 31 ProjectiOS 0x0000000110d93700 0x1026ac000 + 242120448 32 ProjectiOS 0x00000001109068f0 0x1026ac000 + 237349104 33 ProjectiOS 0x000000010f5885d4 0x1026ac000 + 216909268 34 ProjectiOS 0x000000010f588908 0x1026ac000 + 216910088 35 ProjectiOS 0x0000000107cf95b8 0x1026ac000 + 90494392 36 ProjectiOS 0x000000010e85dce8 0x1026ac000 + 203103464 37 ProjectiOS 0x0000000110fadbd4 0x1026ac000 + 244325332 38 ProjectiOS 0x0000000110f48e64 0x1026ac000 + 243912292 39 ProjectiOS 0x0000000110f50004 0x1026ac000 + 243941380 40 ProjectiOS 0x0000000110fb54f4 0x1026ac000 + 244356340 41 ProjectiOS 0x0000000110de715c 0x1026ac000 + 242463068 42 ProjectiOS 0x000000011102e55c 0x1026ac000 + 244852060 43 dyld 0x0000000183faae28 start + 7116 (dyldMain.cpp:1477) Then I symbolicated all the lines starting with "ProjectiOS" in my crash report but I cannot find the issue. Which lines in my crash report cause the crash? Lines 0-16: alcCaptureSamples (in ProjectiOS) + 202259184 alcCaptureSamples (in ProjectiOS) + 203932520 alcCaptureSamples (in ProjectiOS) + 203934184 alcCaptureSamples (in ProjectiOS) + 202275504 alcCaptureSamples (in ProjectiOS) + 86887372 alcCaptureSamples (in ProjectiOS) + 114750024 alcCaptureSamples (in ProjectiOS) + 114734420 alcCaptureSamples (in ProjectiOS) + 114721820 alcCaptureSamples (in ProjectiOS) + 82051900 alcCaptureSamples (in ProjectiOS) + 114725276 alcCaptureSamples (in ProjectiOS) + 114717840 alcCaptureSamples (in ProjectiOS) + 115119400 alcCaptureSamples (in ProjectiOS) + 115128236 alcCaptureSamples (in ProjectiOS) + 115147340 alcCaptureSamples (in ProjectiOS) + 117630372 BrotliEncoderHasMoreOutput (in ProjectiOS) + 2126968 Lines 31-42: alcCaptureSamples (in ProjectiOS) + 237070332 alcCaptureSamples (in ProjectiOS) + 216630496 alcCaptureSamples (in ProjectiOS) + 216631316 alcCaptureSamples (in ProjectiOS) + 90215620 alcCaptureSamples (in ProjectiOS) + 202824692 BrotliEncoderHasMoreOutput (in ProjectiOS) + 1464488 BrotliEncoderHasMoreOutput (in ProjectiOS) + 1051448 BrotliEncoderHasMoreOutput (in ProjectiOS) + 1080536 BrotliEncoderHasMoreOutput (in ProjectiOS) + 1495496 xamarin_get_original_working_directory_path (in ProjectiOS) + 4032 BrotliEncoderHasMoreOutput (in ProjectiOS) + 1991216

Hi, I have an iOS project with the following app targets: main iOS application a notification service extension 5 static libs containing some swift files with public methods 1 dynamic framework with above static libs as dependencies. The framework only contains 2 files - a default .h file and 1 .exp file. This exports file contains mangled-names of all the public methods that are exposed by the 5 static libs present as framework's dependencies. I obtained these symbols using the nm command for each static lib. The main iOS app target has 2 dependencies - the framework and the notification extension. The notification extension only depends on the framework. This setup works perfectly fine. I wanted to understand: If using the exports file is the only way to make this setup work? If not, what else can I do? What way does Apple recommend? According to my requirements, I only need at-most 2-3 functions to be exposed by the framework - thus using a exports file just for that seems to bug me. Thank you.

Failed to fetch certificates: This request is forbidden for security reasons - Unable to find a team with the given Content Provider ID '72df6041-c291-4d95-b690-2a3b75ff72f6' to which you belong. Please contact Apple Developer Program Support. https://developer.apple.com/support I have already confirmed that: All API keys were generated correctly. All required roles and permissions have been assigned in App Store Connect. To confirm my doubt, I requested api key from a fellow developer, and that worked in CodeMagic without throwing an error. Could you please help me figure out why the given Content Provider ID is not being recognized? Thank you.

Hello, I'm not a developer. I have an app in the App Store and an Apple Developer account. I have two questions: 1. I'm trying to find out exactly where the source code of my app is located - I can't. It should be in Xcode. There is only Xcode cloud in my account, which is inactive. 2. I want to find out what programming language my app is written in. How do I do this?

Under macOS 26 and iPadOS, the Help menu in many cases has a menu item for "App Help". This item has the following icon: I need to use this in my own app. I am unable to find this icon in SF Symbols 7 beta. I've scanned all of the icons under "What's New". I've searched for "help", "light", and "bulb" and this icon does not appear. Does anyone know if it's even a new SF Symbol? Or does anyone know of a way to use this icon?

Hello Apple Support, I’m facing an issue with Background Fetch in my React Native project. When I click on Simulate Background Fetch in Xcode, everything works as expected on the iOS Simulator—background tasks run smoothly, and data is fetched without issues. However, on a real device, the app goes to the background but doesn’t execute any of the scheduled background tasks, and it also remains in the background without terminating. Here’s some additional context: React Native Project: I’m using React Native to develop this app, and the background tasks involve: Getting User Location: Fetching the user’s location in the background. API Calls: Calling an API to fetch necessary information based on the user’s location. Scheduling Notifications and Alarms: Scheduling notifications and alarms based on the API response data. Simulator vs. Real Device: In the iOS Simulator, all these background tasks trigger and function correctly when I simulate Background Fetch. On the real device, however, none of these tasks are triggered when I try to simulate Background Fetch. The app only moves to the background without performing any tasks or getting terminated. Device and Configuration Details: iOS Version: 17 Device Model: Iphone xs, Iphone 11, iphone 7 Background Modes: Background Fetch is enabled in Capabilities, and I’ve set the fetch interval to the minimum for testing. I’ve verified that all configurations are correctly set, and I’ve tried restarting the device and Xcode, but the issue persists. Is there something specific about Background Fetch that could prevent it from functioning as expected on physical devices? Any guidance on troubleshooting or additional steps would be highly appreciated. Thank you!

Hello, Good morning to you all. Please I need a guide on how to change my app icon on the developer account. Necessary steps would be appreciated Thanks for the anticipated assistance. Best Regards Biggie

I've got an app where I want to split its Model code into a framework (.xcframework and .framework for debugging) so that it can be used by more than one app. The code has dependencies on 3rd party code, which are installed via pods. During the conversion process I keep running into the same issue which manifests with all the 3rd party code - which is that the majority of its api can be used (something like 80-90%) but for the remainder there is a linker error at runtime showing undefined symbols. I have this problem with CocoaLumberjack,RealmSwift, PhoneNumberKit and more. Its very quick and easy to reproduce the issue with a minimal framework and minimal app, below I'll describe how a minimal setup using CocoaLumberjack reproduces the issue: From scratch, I use Xcode to create a framework project, run pod init, then modify the pod file to be: platform :ios, '16.0' workspace 'TheFramework' project 'TheFramework' target 'TheFramework' do use_frameworks! pod 'CocoaLumberjack/Swift', '3.8.5' end post_install do |installer| installer.pods_project.targets.each do |target| target.build_configurations.each do |config| config.build_settings['IPHONEOS_DEPLOYMENT_TARGET'] = '16.0' config.build_settings['BUILD_LIBRARY_FOR_DISTRIBUTION'] = 'YES' end end end Then I add source code: import Foundation import CocoaLumberjack public class AClassInTheFramework { public class func aMethod() { let consoleLogger = DDOSLogger.sharedInstance DDLog.add(consoleLogger, with: .debug) DDLogDebug("Some logging") } } Within the Xcode project, Build Libraries for Distribution is set to Yes, I also add that line to the pod file in case CocoaLumberjack isn't set similarly. In the Framework's Xcode General section, Frameworks and Libraries contains Pods_TheFramework.framework set to Do Not Embed. In the Build Phases section, in the Link Binary with Libraries section, Pods_TheFramework.framework is set to required. Next I create an Xcode app template, run pod install, and edit the app pod file to be: platform :ios, '16.0' workspace 'AppUsingFramework' project 'AppUsingFramework' target 'AppUsingFramework' do use_frameworks! pod 'CocoaLumberjack/Swift', '3.8.5' end post_install do |installer| installer.pods_project.targets.each do |target| target.build_configurations.each do |config| config.build_settings['IPHONEOS_DEPLOYMENT_TARGET'] = '16.0' end end end I build the framework, and drag and drop it into the app. I add the following code to the app's delegate: import TheFramework ... AClassInTheFramework.aMethod() The App's target has the following linkage settings: When I build and run the app, there is the following error: If I change the source code in the framework to this: public class AClassInTheFramework { public class func aMethod() { let consoleLogger = DDOSLogger.sharedInstance DDLog.add(consoleLogger, with: .debug) // DDLogDebug("Some logging") } } Then there is no error and the code runs successfully. This illustrates the problem I've encountered with all the nested frameworks - in this particular case calls to DDLog.add() don't result in an error but calls to DDlogDebug() do, and that has been mirrored with other nested frameworks (for example with Realm, opening a database, adding, finding,retrieving an item all works without a problem, however attempting to use Realm's Results<> API results in a similar symbol not found error). Additionally note that the identical CocoaLumberjack code can run fine when used directly from within the app, i.e., if I add the following code to the app: import CocoaLumberjack func useCocoaLumberjackDirectlyFromWithinApp() { let consoleLogger = DDOSLogger.sharedInstance DDLog.add(consoleLogger, with: .debug) DDLogDebug("Some logging") } useCocoaLumberjackDirectlyFromWithinApp() Then it runs, i.e. DDLogDebug() can be successfully called from within the app, its only when its called via the framework that the error occurs. Why might I be encountering these issues? I'd have thought either I'd be able to use 100% of the nested framework's public api, or 0% of it (is something is not configured correct), not ~80% which is what I am encountering. Any ideas? TIA

Hi! I was wondering if anyone else encountered similar issues and what the solution ended up being. We're encountering weird sign-in issues on our iOS version of our app. It seems like an uninstall and reinstall solves it, but the issue seems to only impact users who underwent the transfer process from one iOS device to another. What I am curious about: What is copied over from one device to another in this process? Is there a way outside of owning multiple test devices to replicate this flow? Our current suspicion is that NSUserDefaults is not being cleared by our app on first start, and that stale data is copied over during this transfer process, breaking the sign-in until a re-install wipes everything properly. Does it seem like we're on the right track with this assumption, or completely out to lunch?

There was a time that Apple Developer Documentation provides a filter to show the changes across versions, at https://developer.apple.com/documentation/technologies , with purple (modified), green (added), and red (deprecated) annotations. I wonder if this feature is completely removed, or is it still hiding somewhere? It is helpful to diff the API changes among versions. Thanks. edit: as pointed out by Rick, here is an archive link to what it used to look like

I added an Apple Watch app target for an iOS app. If I install it directly through Xcode it runs, however it seems to be able to communicate with iphone through Watch Connectivity framework and once I close the app it seems to uninstall itself from the watch. When I installed the iphone app frist, the app does not show up on the available apps on the iphone Watch application, what could be the issue ? The iphone app was created using react native through expo. Testing Devices Iphone 13 pro max IOS 26.0.1 --- Apple Watch Series 4 WatchOS 10.6

I’m developing an app that uses Family Controls to block other apps. I’ve already received approval from Apple for the entitlement, and everything works perfectly when I run the app from Xcode on a physical device. However, when I upload the same build to TestFlight, the app installs and runs, but the Family Controls functionality doesn’t work — it seems like the entitlement isn’t being applied in the TestFlight version. So I’d like to ask: 👉 Do Family Controls entitlements work automatically on TestFlight builds, or is there any additional step required to enable them?

I observed the following problem: A scientific code to perform Reverse Monte Carlo simulations (‘rmcxas’) compiled with the most up to date version of gcc/gfortran and Xcode including command line tools on Mac OS Sequoia 15.4 on a Macbook air with M4 processor generates the following problem upon starting it in a terminal: dyld[10154]: dyld cache '(null)' not loaded: syscall to map cache into shared region failed dyld[10154]: Library not loaded: /usr/lib/libSystem.B.dylib Referenced from: <0144F82E-003C-37A9-A544-9AE6336E549B> /Users/markuswinterer/bin/rmcxas Reason: tried: '/usr/lib/libSystem.B.dylib' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/usr/lib/libSystem.B.dylib' (no such file), '/usr/lib/libSystem.B.dylib' (no such file, no dyld cache), '/usr/local/lib/libSystem.B.dylib' (no such file) zsh: abort rmcxas This occurs only about every 5th time the code is started. Help would be highly appreciated.

So, as we found out from WWDC, the migration to Apple Silicon is inevitable. Does anyone have a good recommendation for a replacement for Macintosh Common Lisp on Apple Silicon? I was using it back in the MPW days and struggling to keep the Lisp code working, but Apple Silicon has thrown a money wrench at it! Thanks in advance for any advice on any available Apple Silicon Lisp development tools!

Hello, I'm developing a macOS application that uses the Virtualization framework to run Linux virtual machines (specifically Ubuntu and Fedora) on Apple Silicon Macs. I've noticed that while the macOS host properly supports all trackpad gestures, the two-finger tap gesture for right-click does not work within the Linux guest. Only the primary click is recognized. This behavior is consistent across different Linux distributions and desktop environments (GNOME, KDE, etc.). I would like to confirm: Is the macOS Virtualization framework expected to support trackpad gestures such as two-finger tap for right-click within Linux guest VMs? If not currently supported, is there a known workaround to enable right-click functionality for the trackpad in Linux guests? (e.g., configuration changes in the VM, Linux kernel input modules, or framework-level adjustments.) Any insights or suggestions would be greatly appreciated. Thank you!

I've created an installation package and it is failing to install on macOS 15.6. The package is, I believe, properly notarized, since it will install correctly on other macOS versions, including 15.5 The only clue I have is the output from installer: installer[8015] : Opened package is not the same at install time installer[8015] : Unable to use PK session due to incompatible packages. Terminating. installer[8015] : Install failed: The Installer could not install the software because there was no software found to install. The installer consists of a a single "component" package, and the outer "product" package. The component package is present, and I can successfully run installer manually to install it, so I don't think the component package is corrupt. Has anyone else encountered this? Are there any tools available to help me diagnose the issue? The logging is not helpful.

Hi everyone, I'm developing a visionOS application using Unity with an enterprise developer account. I applied for the Main Camera Access entitlement, but at the time of submission, the email address associated with my Apple ID was deactivated, so I couldn’t receive any email communication from Apple. Later, I updated the email address for my Apple ID. Now, in the Apple Developer portal under Identifiers, I can see that my app has been granted Main Camera Access, and I can also add the corresponding capability in Xcode. However, according to Apple’s documentation(https://developer.apple.com/documentation/visionos/building-spatial-experiences-for-business-apps-with-enterprise-apis): “To use entitlements, you need to include both the entitlement file and a corresponding license file in your app. After Apple approves your app for one or more entitlements, you receive a license file, along with additional instructions.” I never received this license file, possibly due to the deactivated email. I don't know where to find it or how to retrieve it now. What exactly is this license file? If it was originally sent to an unreachable email, how can I request it again or get it resent? Where in the Apple Developer portal (or elsewhere) can I access or download this file? Any help or guidance would be greatly appreciated! Thanks in advance.

Hello, I’m trying to test a Xamarin.iOS application using the iOS 26 simulators in Mac Visual Studio, but I’m encountering an issue where the simulators are not appearing or accessible from Visual Studio. Details: macOS version: 15.6 (24G84) Xcode version: 26 Beta 5 Visual Studio version: 17.6.0.80 Xamarin.iOS version: Xamarin.Forms (Version: 4.6.0.1180) using XAML for cross-platform support (iOS/Android) The problem started after updating to iOS 26 SDK. I am unable to select or run the app on any iOS 26 simulator from Visual Studio. Has anyone faced a similar issue? Is there any configuration or workaround to enable iOS 26 simulators for Xamarin projects? Thanks in advance for your help.

My application targets iOS 15+. Attempting to build and run it on my iPhone SE (orphaned at iOS 15.6) results in "Failed to prepare the device for development." I'm building with Xcode 15.2. What is the expected procedure here?

Is this a valid thing to include in the Info.plist file? If so is a category of public.app-category.astronomyvalid? I couldn't find that, but the categories I did find seemed very limited.