Merhaba, iOS üzerinde bir sözleşme onay uygulaması geliştiriyorum. Kullanıcıların dijital ortamda sözleşmeleri okuyup onaylaması gerekiyor. Ancak hukuki geçerlilik konusunda bazı tereddütlerim vardı. Bursa’da yaşayan biri olarak bu konuda bir avukata danışmam gerekti. Şans eseri https://www.avukatcanata.com ile karşılaştım ve hem bireysel hem ticari sözleşmeler konusunda gerçekten çok net açıklamalar sundular. Özellikle elektronik imza ve KVKK uyumu hakkında verdikleri bilgiler sayesinde projemi yasal zemine oturtabildim. Eğer bu tarz uygulamalar geliştiriyorsanız, mutlaka bir hukukçu görüşü alın. Yanlış bir adım size veya kullanıcınıza ciddi sonuçlar doğurabilir. Teşekkürler 🍏

I am a solo developer building a cross-platform voice assistant app using Capacitor (with HTML, JS) and Xcode for the iOS version. The app is called "Echo Eyes," and it already functions well as a Progressive Web App (PWA). However, the iOS build has been completely blocked due to persistent sandbox permission errors from macOS during the CocoaPods framework embedding phase. This issue has caused severe disruption to my project and personal well-being, and I am writing to formally request assistance in identifying a clear solution. I am not a beginner and have followed all known best practices, forums, and Apple guidance without success. What I’ve Built So Far: Fully working PWA version of the app (voice input, HTML/JS interface) Capacitor initialized with ID: com.echo.eyes.voice Capacitor iOS platform added with CocoaPods App runs fine until Xcode reaches: [CP] Embed Pods Frameworks The Exact Problem: Sandbox: bash(12319) deny(1) file-read-data /Users/Shared/projects/Echo_Mobile/ios/App/Pods/Target Support Files/Pods-App/Pods-App-frameworks.sh Command PhaseScriptExecution failed with a nonzero exit code Clarification: This is not an HTML/JS issue. The failure occurs in Xcode long before web assets are embedded into the bundle. The shell script /Pods-App-frameworks.sh cannot be read due to macOS sandbox restrictions. Everything I’ve Tried: Gave Xcode and Terminal Full Disk Access Ran: sudo xattr -rd com.apple.quarantine on the entire Pods directory Added /bin/bash and /bin/sh to Full Disk Access (after confirming the exact shell via $SHELL) Attempted to disable Gatekeeper via Terminal: sudo spctl --master-disable (confirmed not effective without GUI toggle) Tried relocating project to /Users/Shared/projects/ Cleaned build folder, removed derived data, reinstalled pods Debugged shell usage with: echo "▶️ Embedding under shell: $SHELL" in the [CP] Embed Pods Frameworks script Attempted to grant shell access to Documents Folder, Desktop, and more via Files & Folders Current State: Despite following all known and recommended steps, Xcode continues to return the same sandbox error. The shell script that embeds the CocoaPod frameworks is denied permission to read its own contents by macOS. What I Am Asking For: Is this a known issue in current versions of macOS or Xcode regarding sandbox denial for shell execution inside Pods? Is there a recommended method to grant /bin/bash or /bin/sh permission to read and run these scripts under Xcode without compromising system security? Is moving the project outside /Users (e.g. to /Projects) the only real workaround? Are there official Apple workarounds or entitlements available for developers encountering this? Personal Note: This issue has caused significant emotional and physical distress. I’m building this app as a personal healing tool and companion. I’ve poured months of work into this and done everything I can to follow Apple’s development guidelines. I’m not asking for hand-holding — only a clear, respectful response confirming whether this is expected behavior and what can be done to resolve it. Thank you for your time and understanding.

How can I allow the popup I am encountering while I run my UI tests with video recording in the Github actions. Since these tests are running on VMs, it's not possible to manually click Allow. Also the remote robot cannot interact with OS-level dialogs.

iphone 15 pro max ios 26 Stuck at the developer mode startup interface and unable to swipe up.

I am developing an Augmented Reality (AR) navigation application for the iPad, utilizing the ARCL library to place Points of Interest (POIs) in the real world. The application's behavior varies significantly based on the device's networking configuration: Cellular Network (Expected Behavior): On an iPad with a cellular modem, when using the cellular network, all POIs are placed accurately with correct orientation. Wi-Fi Only (Expected Behavior): On a Wi-Fi-only model (no GPS chip), POI placement is inaccurate, confirming the need for an external GPS receiver for that hardware configuration. Cellular + Wi-Fi (Anomalous Behavior): The iPad is a cellular model (equipped with GNSS/GPS). The device is connected to a Wi-Fi network (enforced via an MDM profile, preventing the user from disabling Wi-Fi). When actively connected to this specific Wi-Fi network, the AR POIs consistently display with an incorrect orientation and placement, even though the device hardware has a dedicated GPS chip. The placement error strongly suggests that the device's determined location or heading is erroneous. It appears that the active Wi-Fi connection is somehow interfering with or overriding the high-accuracy GNSS/GPS data, leading to a flawed Core Location determination that negatively impacts the ARCL world tracking and anchor placement. Has anyone experienced a scenario where an active Wi-Fi connection on a cellular iPad model causes Core Location to prioritize less accurate location data (potentially Wi-Fi-based location services) over the device's built-in GNSS/GPS, resulting in severe orientation errors? We observed that on Apple map(native application) as well it is showing wrong location and orientation when it is connected to WiFi

Hi all, I'm trying to integrate Apple’s DeviceCheck API into my Flutter iOS app. I already have everything set up on the backend — the Apple private key, key ID, team ID, and DeviceCheck capability. The backend is generating and signing the JWT correctly and making requests to Apple. However, I’m currently stuck on the frontend (Flutter): 👉 How can I generate the device_token required by the DeviceCheck API (via DCDevice.generateToken) in a Flutter iOS app? I understand that DCDevice.generateToken() must be called from native Swift code. I previously attempted to use a MethodChannel to bridge this in Swift, but would prefer not to write or maintain native Swift code if possible. I've looked for a prebuilt Flutter package to handle this, but nothing exists or is up-to-date on pub.dev. Main Question: Is there any Apple-supported way to generate the device_token for DeviceCheck from a Flutter app without writing Swift code manually? If not, is DCDevice.generateToken() the only possible approach, and must I implement this via Swift and Flutter platform channels? Thanks!

i have been added to an apple membership organization, and given App manager's rights b ut my build keeps failing and asking me to get more access

I’m using Developer iOS app to watch WWDC session videos. i notice it doesn’t record a video as watched after I watched it and even manual marking it using Mark as Watch has no effect. I remember the issue started several years ago because some old WWDC videos were marked watches.

Hi everyone, I’m hoping someone here can shed some light on what’s going on with Apple’s one-hour security delay when trying to register an iPhone for development use. I’m currently setting up an app build using Expo / EAS and a paid Apple Developer account. Every time I scan the device registration QR code or try to authorise my iPhone as a development device, I get hit with a “security delay — try again in one hour” message. This happens every single time, even if I wait the full hour. The device is the same iPhone I always use, signed in to the same Apple ID, and verified with 2FA. The only thing unusual about my setup is that I’m using Starlink for internet access. Because Starlink uses dynamic IP routing and your exit node changes frequently (depending on which satellite or ground station you’re on), it looks like I’m signing in from a new location each time — sometimes even hundreds of miles apart. It seems that Apple’s security system flags each of these as a “new login” or “new device registration,” then enforces a one-hour safety lockout. That makes it basically impossible to register my device and proceed with iOS builds or testing. Has anyone else run into this problem while using Starlink (or other dynamic-routing connections like VPNs or cellular hotspots)? And if so — is there any known workaround or setting to whitelist a device, stabilise verification, or bypass the repeated one-hour wait? This feels like an over-protective security feature that doesn’t play well with modern satellite internet setups. Any insights from the Apple engineers or other developers would be hugely appreciated. Thanks, Tim Lazenby

Hi, I requested the https://itunes.apple.com/lookup?id=6482849843&country=us for getting the information of Goods puzzle sort challange , but the screenshotUrls in the response was empty. Is iTunes search API has issue with getting the screenshot urls ? Is there any plan to update it ?

I'm a newbie to on-demand resources and I feel like I'm missing something very obvious. I've successfully tagged and set up ODR in my Xcode project, but now I want to upload the assets to my own server so I can retrieve them from within the app, and I can't figure out how to export the files I need. I'm following the ODR Guide and I'm stuck at Step #4, after I've selected my archive in the Archives window it says to "Click the Export button", but this is what I see: As shown in the screenshot, there is no export button visible. I have tried different approaches, including distributing to appstore connect, and doing a local development release. The best I've been able to do is find a .assetpack folder inside the archive package through the finder, but uploading that, or the asset.car inside it, just gives me a "cannot parse response" error from the ODR loading code. I've verified I uploaded those to the correct URL. Can anyone walk me through how to save out the file(s) I need, in a form I can just upload to my server? Thanks, Pete

I’m a registered iOS developer, and I’ve been facing an issue with installing iOS developer updates for the past couple of years. I can download the updates, but they get stuck at 99.9% complete and don’t finish. I’ve tried following the instructions to force restart the phone, but it stays on the Apple logo screen until it dies. I can update official iOS versions, but not beta versions. To update, I have to put the phone in DFU mode and install the update that way. This is frustrating and prevents me from making timely updates to my app and from diagnosing new issues during testing. I’d like to request that Apple investigate this issue and identify a solution. For reference, I’ve installed a bare-bones version with no new apps, and the problem persists. I would like a resolution that allows me to update normally without having to DFU the phone each time. This occurs via OTA or IPSW manual download and installation. Please refer to the following FB submission numbers: FB21642029 and FB21017894. CAN SOMEONE PLEASE RESPOND BACK TO THIS MESSAGE AND HELP ME TROUBLESHOOT THIS ISSUE?!

I am located in Taiwan and recently updated my Mac to the latest OS and installed the newest Xcode. However, I’m experiencing extremely slow download speeds when trying to add the iOS 26.2 Simulator Runtime (approx. 8GB) via Xcode > Settings > Platforms. It is currently downloading at a rate of only 500MB per hour, which is impractical. I have checked the official downloads page but couldn't find a standalone DMG link for this specific version. My questions are: Is there a direct download link (DMG) available on the Apple Developer portal for the iOS 26.2 Simulator? If no direct link exists, are there any recommended methods to accelerate the download? (e.g., using terminal commands or changing DNS settings). Any help or direct URLs would be greatly appreciated. Thank you!

開発アプリで通知確認を行うため、UDIDをプロビジョニングプロファイルに追加する必要があります。 iPhoneのUDIDは取得することができたのですが、AppleWatchのUDIDを取得する方法が分かりません。 Xcodeと接続してUDIDを取得しようとしましたが、iPhoneのみ認識がされAppleWatchが認識されていません。 AppleWatchもデベロッパモードをONしなければならないとAppleから返答をもらったが、その方法がわからないのでどなたかご教授お願い致します。

I am developing an iOS in-app SDK for collecting code coverage data. The SDK writes coverage data to a specified file by calling __llvm_profile_set_filename and __llvm_profile_write_file. This implementation worked correctly until I switched to Xcode 26.0 to build my project. Now, when __llvm_profile_write_file() is executed, it crashes with the following error stack. Can anyone provide any assistance? Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Subtype: KERN_INVALID_ADDRESS at 0x0000000000000001 Exception Codes: 0x0000000000000001, 0x0000000000000001 Termination Reason: Namespace SIGNAL, Code 11, Segmentation fault: 11 Terminating Process: exc handler [454] Thread 96 name: Dispatch queue: com.test-coverage.processing Thread 96: Crashed: 0 Demo 0x122602ea8 initializeValueProfRuntimeRecord (in Demo) (InstrProfilingValue.c:351) 1 Demo 0x00000001226064c0 writeOneValueProfData (in Demo) (InstrProfilingWriter.c:153) 2 Demo 0x0000000122606308 writeValueProfData (in Demo) (InstrProfilingWriter.c:234) 3 Demo 0x00000001226060d0 lprofWriteDataImpl (in Demo) (InstrProfilingWriter.c:401) 4 Demo 0x0000000122605d98 lprofWriteData (in Demo) (InstrProfilingWriter.c:261) 5 Demo 0x0000000122604804 writeFile (in Demo) (InstrProfilingFile.c:536) 6 Demo 0x122604664 __llvm_profile_write_file_alias + 228 7 Demo 0x000000011c6dd108 -[BDTestCoverage p_dumpMainCoverageInfoWithCustomKey:] (in Demo) (TestCoverage.m:995) 8 Demo 0x000000011c6dcef8 -[BDTestCoverage p_dumpAllCoverageProfileWithCustomKey:] (in Demo) (TestCoverage.m:970)

Hi everyone. I’m working on an iOS app that uses Firebase Cloud Messaging (FCM) to send push notifications. I’m encountering an issue when trying to send notifications either from Firebase Functions or directly using the FCM token with the Firebase Admin SDK and REST API. Error Message: FirebaseMessagingError: Auth error from APNS or Web Push Service code: 'messaging/third-party-auth-error' message: 'Auth error from APNS or Web Push Service' What I’ve Set Up: iOS App Registered in Firebase Bundle ID: Kilovative-Designs.ParkAware APNs Key downloaded from Apple Developer Portal Team ID and Key ID correctly entered in Firebase Console Firebase Admin SDK Service Account setup and used for sending Device is successfully receiving FCM tokens Subscribed to topics and calling Messaging.messaging().subscribe(toTopic:) works Using firebase-admin to send FCM messages via sendToDevice or sendToTopic What I’ve Tried: Tested push via firebase-admin in Node.js (got same APNs auth error) Tested with both topic-based and direct token-based push Confirmed the .p8 key is uploaded in Firebase, with correct Key ID and Team ID Tried generating a new APNs Auth Key Firebase Admin SDK is initialized with the correct service account Using Node.js firebase-admin with a known good FCM token, and sending this payload: { notification: { title: "Test Notification", body: "This is a direct FCM test" }, token: "cxleOwi73EhFh9C5_V4hED:APA91bE3W..." } Returns: FirebaseMessagingError: Auth error from APNS or Web Push Service Questions: Are there known conditions under which Firebase throws this error even if the APNs Auth Key is present? Does the Bundle ID need to start with com. in the Apple Developer Portal and Firebase for APNs authentication to work? Could this be a certificate or provisioning profile mismatch issue (even when using a .p8 key)? Is there a way to manually validate APNs authentication from Firebase outside of actual push delivery? Any insight or guidance would be incredibly helpful. I’m new to developing and have tried repeated efforts to fix this issue but still haven’t resolved it. Thanks in advance!

In our Unity App for iOS build, when we opened the PDF from the app, it is automatically opening in landspace mode instead of portrait. In the android and windows apps, we are able to open in the portrait mode. We tried to make the changes in the project settings but it did not change. Any way in which we can acheive this would be helpful for us.

I am trying to integrate Apple Music API using MusicKit and need to generate a Developer Token. However, when I try to create a new key from the Certificates, Identifiers & Profiles section, the “Media Services (MusicKit, ShazamKit, Apple Music Feed)” option is grayed out. We are getting the error 'there are no identifiers available that can be associated with the key.' Although we did checkmark 'musickit' in app services. I have already: Enrolled in the paid Apple Developer Program Created a valid App ID under Identifiers Logged in as the Account Holder Tried multiple browsers and devices Despite this, the option remains disabled. Could you please enable this or let me know what further steps I need to take? Thank you!

There is a bug in Unity Plugins: Corehaptics.AssetPickerDrawer throws exceptions and draws incorrectly when fieldInfo or assetType is null (FB17305973). I fixed it and created a pull request: https://github.com/apple/unityplugins/pull/47 It has been months and this bug is really annoying.

I am integrating On Demand Resources into my Unity game. The resources install without any problems if the internet connection is stable: all resources are installed. While testing various scenarios without an internet connection, I encountered the following problem: if I turn off the internet during installation, I don't get any error messages, but if I turn the internet back on, the download no longer continues (and I still don't get an error). If I reopen the application with a stable internet connection, the download will always be at 0%. Please tell me what I am doing wrong. #import "Foundation/Foundation.h" #if ENABLE_IOS_ON_DEMAND_RESOURCES #import "Foundation/NSBundle.h" #endif #include <string.h> struct CustomOnDemandResourcesRequestData; typedef void (*CustomOnDemandResourcesRequestCompleteHandler)(struct CustomOnDemandResourcesRequestData* handler, const char* error); #if ENABLE_IOS_ON_DEMAND_RESOURCES struct CustomOnDemandResourcesRequestData { NSBundleResourceRequest* request; }; extern "C" CustomOnDemandResourcesRequestData* CustomOnDemandResourcesCreateRequest(const char* const* tags, int tagCount, CustomOnDemandResourcesRequestCompleteHandler handler) { NSMutableArray* tagArray = [NSMutableArray array]; for (int i = 0; i < tagCount; i++) { const char* tag = tags[i]; if (tag != NULL) { [tagArray addObject:[NSString stringWithUTF8String:tag]]; } } NSSet* tagSet = [NSSet setWithArray:tagArray]; CustomOnDemandResourcesRequestData* data = new CustomOnDemandResourcesRequestData(); data->request = [[NSBundleResourceRequest alloc] initWithTags:tagSet]; [data->request beginAccessingResourcesWithCompletionHandler:^(NSError* error) { dispatch_async(dispatch_get_main_queue(), ^{ const char* errorMessage = error ? [[error localizedDescription] UTF8String] : NULL; handler(data, errorMessage); }); }]; return data; } extern "C" void CustomOnDemandResourcesRelease(CustomOnDemandResourcesRequestData* data) { [data->request endAccessingResources]; delete data; } extern "C" float CustomOnDemandResourcesGetProgress(CustomOnDemandResourcesRequestData* data) { return data->request.progress.fractionCompleted; } extern "C" float CustomOnDemandResourcesGetLoadingPriority(CustomOnDemandResourcesRequestData* data) { float priority = (float)data->request.loadingPriority; return priority; } extern "C" void CustomOnDemandResourcesSetLoadingPriority(CustomOnDemandResourcesRequestData* data, float priority) { if (priority < 0.0f) priority = 0.0f; if (priority > 1.0f) data->request.loadingPriority = NSBundleResourceRequestLoadingPriorityUrgent; else data->request.loadingPriority = (double)priority; } extern "C" const char* CustomOnDemandResourcesGetResourcePath(CustomOnDemandResourcesRequestData * data, const char* resource) { NSString* resourceStr = [NSString stringWithUTF8String: resource]; NSString* path = [[data->request bundle] pathForResource: resourceStr ofType: nil]; if (path == nil) { return NULL; // или другое значение по умолчанию } const char* result = strdup([path UTF8String]); // копируем строку return result; // в C# нужно будет освободить память } extern "C" void CustomOnDemandResourcesFreeString(const char* str) { free((void*)str); } #else // ENABLE_IOS_ON_DEMAND_RESOURCES struct CustomOnDemandResourcesRequestData { }; extern "C" CustomOnDemandResourcesRequestData* CustomOnDemandResourcesCreateRequest(const char* const* tags, int tagCount, CustomOnDemandResourcesRequestCompleteHandler handler) { CustomOnDemandResourcesRequestData* data = new CustomOnDemandResourcesRequestData(); if (handler) handler(handlerData, NULL); return data; } extern "C" void CustomOnDemandResourcesRelease(CustomOnDemandResourcesRequestData* data) { delete data; } extern "C" float CustomOnDemandResourcesGetProgress(CustomOnDemandResourcesRequestData* data) { return 0.0f; } extern "C" float CustomOnDemandResourcesGetLoadingPriority(CustomOnDemandResourcesRequestData* data) { return 0.0f; } extern "C" void CustomOnDemandResourcesSetLoadingPriority(CustomOnDemandResourcesRequestData* data, float priority) { } extern "C" const char* CustomOnDemandResourcesGetResourcePath(CustomOnDemandResourcesRequestData * data, const char* resource) { return NULL; } extern "C" void CustomOnDemandResourcesFreeString(const char* str) { } #endif // ENABLE_IOS_ON_DEMAND_RESOURCES