Hello there I have got into a bit of an issue with the Apple TV 4k 3rd Gen with Ethernet . So I installed the iOS 26 beta to try out the new changes I usually do this on Apple TVs but in this case it has a bug where my apple music randomly skipped to the next songs . So after some bit of reading I got to know that the apple TV as a recovery mode which could be accessed by pressing home and pause/play buttons . After getting there I was required to bring an iPhone close to start the recovery process which I did but somehow that process always failed I tried to plug in the Ethernet cable since my apple TV is literally 3-5 inches away from my main router I even tried the recommended option of switching to a 2.4ghz connection but nothing worked . I would think that by apple getting rid of the USB ports on these things they had a reliable method of recovery in case of error because these are computers they are bound to fail at some point . So for now am stuck with a boot looping apple TV without a port and I don't even know how that too came about since the recovery process barely starts and fails. Ps am in Africa where we have no apple stores so we usually deal with our products ourselves

After the update of the Xcode to latest version, I’m getting “No Such Module Unity Framework” as error. the complete information is below. I had to update the Xcode and the O.S as per the Apple Requirement from my older version of 14.x to latest 16.3. I had no issued running the Unity within my iOS App till the recent update. Previous Setup: Unity was successfully integrated into this iOS app and running fine before the update. As it was working till the Xcode version 14.3, i have not changed any code relevant to Unity. What I’ve Tried: a. Added UnityFramework.framework to “Link Binary with Libraries” and marked it as “Embed & Sign”. b. Verified Framework Search Paths include $(PROJECT_DIR)/UnityProject/build/Debug-iphoneos c. Cleaned build folder, deleted Derived Data d. Checked [CP] Embed Pods Frameworks step in Build Phases Stuck On: Xcode still throws "No such module 'UnityFramework'" — it’s as if the framework isn’t being built or seen from my main project. Request for Help: Has anyone encountered this issue post-Xcode 16.3 update from 14.x. I’d really appreciate any guidance, updated workflows, or even a checklist of steps for properly integrating Unity into an existing iOS app with the new Xcode build system.

This is my first problem and my first question hopefully somebody can help or give me some suggestions. I was in the developr beta of IOS 26 build(235260n) for a while I haven't updated it since the new beat has came out, beta 3. I have been trying to update requested, after about 20 seconds it goes away but does not start the download the update. The problem also begins to download something into the system beta goes from 22.85 GB to 33.78 GB. It just holds the update but doesn't;t update the phone. I have tried power cycling the device and everytime I do that it just resets the system data and allows up to try the update again. Unsure what to do and don't know if I would need to wait for the public beta for IOS26 to change anything on the device. Please let me know if you guys have any more suggestions what should be the next step. I also was unsure if I should backup the device and reinstall it to make sure that its not something with the conncetion.

I have more than five tabs in a TabView, and on some screens, I'm seeing a navigation bar with the title "More". I understand that this is the default behavior of TabView when there are more than five tabs—iOS automatically creates a "More" screen. I've set navigationBarHidden = true throughout my app, but the navigation bar still appears on some screens within the "More" section. Is there another way to hide the moreNavigationController or completely remove the navigation bar from the "More" screen?

Hello, The icloud main account with our app was closed for some reason we don't know why. We are unable to take action because we cannot accept current apple policies. We are unable to change the app's main account, and we have not been able to find out how to do this from Apple Turkey Support. How can we solve this problem?

i am seeing a call icon on CallKit incoming call screen for a PushKit-initiated call (without caller information like name or number)

After too many boot loops and inability to boot up at all from system data bloating, I decided to restore the iPhone 16 Pro Max I’m beta testing on back to iOS 18.4 for a third time. Unfortunately, I found the iOS 26 beta 2 had made a iCloud backup last night, replacing my 18.4 backup. Is this something betas are supposed to do? I’ve been beta testing for around a decade now, I’ve never seen a iOS beta make an iCloud backup. Is anyone else noticing excessive system data bloating (70-100 GB or more)? Regardless, I’m in it for the long game now 😂

I’d like to create a button on my iPhone Home Screen that changes settings if I am using an external lens mounted to my phone. This is what I have along with notes on what I hope to do. But it does not work. I am only able to open either the camera settings or the camera preserve settings but nothing will toggle macro controls. There is an additional step within the camera app as well but it can be skipped for brevity. Name: Telephoto and macro lenses Check if macro settings are already enabled or not. (Settings > Camera > Macro Control toggle) as well as (Settings > Camera > Preserve Settings > Macro Control toggle) Non-working shortcut code: Verification question: "Are you using an external lens?" If yes, Notification: "Turning on Macro Control and preserve settings for macro control." (Run below immediately) prefs:root=CAMERA&path=Turn%20On%20Macro_Control And prefs:root=CAMERA&path=CameraPreserveSettingsSwitch&path=Turn%20On%20Macro_Control If no, Notification: "Turning off Macro Control and Preserve Settings for macro control." (Run below immediately) prefs:root=CAMERA&path=Turn%20Off%20Macro_Control And prefs:root=CAMERA&path=CameraPreserveSettingsSwitch&path=Turn%20Off%20Macro_Control

Hi everyone, I am doing some research into authentication methods on iOS apps. I'm looking to understand the choices iOS developers make and why. If you're an iOS developer, I’d be super grateful if you could take a couple of minutes to fill out a short questionnaire — it’s just 6 questions plus a few demographics, and it really helps my research. 🙂 This is a Swansea University research project approved by the Faculty of Science and Engineering under approval number 120251357213133. Link to questionnaire: https://forms.microsoft.com/e/YZme9jYZE6

When I Installed beta 2 , The multiple columns for widgets disappeared. I want it back ..... Ive tried removing my device in CarPlay under General and adding it again. Didn't work.

m personal iPhone is managed by an Unauthorized and Unknown mdm management team, The profile isn’t showing up in VPN Settings and I can’t remove them from having Remote access and control over my Personal Device! I’ve SPENT MANY MONTHS TRYING TO GET SUPPORT VIA EMAILING APPLE DEVELOPER AND SPEAKING TO APPLE SUPPORT WHICH HAS BEEN EXTREMELY EXHAUSTING AND HUMILIATIN! I’ve resorted to contacting Internet crime websit, the federal trade commissio, Better business bureau and Consumer Affairs to file an online complaint against Apple for not complying with their Security and Privacy policy for consumers accounts! Because of this unauthorized and unknown mdm devi management profile I don’t have COMPLETE CONTROL OVER MY OWN IPHONE! !

I have been working on telecommunication testing of ALE Softwar. Since no invite email received, I can’t unable to test in my IPhone. there is no options to add my test app. this that app url https://apps.apple.com/in/app/ale-softphone/id1588713865

Hello everyone, I’m having an issue with the Photos app on my iPhone 13 Pro running iOS 26 Beta 2 (happened in first Beta as well). When I open the Photos app and go to the Collections section, it’s completely blank — no photos, just empty space. The library seems to be working fine and my photos show up in the Library. I’ve tried restarting the phone and force-quitting the app, but no change. Could it be a bug? Also, I just switched from Android to IOS, one week ago, if this detail helps. Is anyone else experiencing this issue? Any fixes or suggestions? Thanks in advance!

I have an iPhone 14 running iOS 26 Beta 2 that I wanted to start using Personal Voice on. It allowed me to complete the recordings and start the process, however even with the phone charging and locked the process hangs. It is connected to WiFi and cellular while attempting to run. It is connected to a 20W apple charger with an offical cable. I have a sneaking feeling it's related to me running the iOS beta on this device. I've provided some info below. iOS 26 Beta 2 iPhone 14 128gb Model MPUF3ZD/A No SIM restrictions

I've got the initial WWDC beta of macOS 26 (25A5279m) installed inside a virtual machine (UTM), but can't seem to update to the second beta. Nothing is showing up within Software Update. Is this because it's within a VM, or am I doing something wrong? It'd be a real pain to have to install a new VM afresh with the RestoreImage for every update.

Issue with Heart Rate Graph from Apple Watch in iOS App Hello Community! I hope everyone is doing well. I'm developing an iOS app that includes a feature to display a graph of the heart rate recorded during a route using the Apple Watch. Current Implementation I have successfully implemented data collection and transfer from the Apple Watch to the iPhone. The app's main UI correctly displays the user's real-time BPM. When the user stops the route, an analysis view is generated, showing speed and altitude (both work perfectly). Expected Behavior The user starts recording a route while monitoring heart rate. After tapping "Stop Route," an analysis view should display a heart rate graph along with speed and altitude data. Issue Encountered Despite multiple attempts, I have not been able to properly generate the heart rate graph. The only result I have achieved so far is a flat line with points representing the recorded BPM over time, instead of a proper graph. Request for Help If anyone has experience implementing a similar feature, I would appreciate any guidance on correcting my implementation. I can share: The file responsible for graph visualization. The file handling data processing after the user stops the route. Any help or suggestions would be greatly appreciated! Summary I'm trying to display a heart rate graph from Apple Watch data in my iOS app. While data collection and transfer work fine, the graph only shows a flat line instead of a proper visualization. Speed and altitude graphs work correctly. If anyone has experience with this, I’d love some guidance!

When anyone calling through cellular call first calls don’t show or call notifications in screen even didn’t play ringtone . but if caller calling second time then ringing tone play properly. this problem happen my iphone 15 pro .128gb im from india . )

Hello developers, My question isn't directly related to app or software development, but this seems to be the most appropriate channel to possibly find the information I need. Context I work for an automotive company and I'm currently looking for Apple CarPlay certification guidelines. We're in the process of installing a multimedia system in a vehicle. The most viable solution would be to use the multimedia unit and microphone provided by our supplier, but with a custom wiring harness developed by our company to simplify the installation process. The multimedia unit, microphone, and the supplier’s harness are already certified for CarPlay. Question Would using our company’s custom wiring harness affect the existing CarPlay certification of the supplier’s product? Any information, contact, or suggestion on where I could find official guidance on this matter would be greatly appreciated. Thank you in advance!

In preparing my ipad 7th gen for resale, I factory reset and now it will not power up. Tried hard reset, new cables, different computer. iTunes does not recognize the ipad yet device manager shows it hooked to usb port. Any advice? Thanks!

In xr model mic not working after beta 18.4 update please check