self.pushRegistry = [[PKPushRegistry alloc] initWithQueue:dispatch_get_main_queue()]; self.pushRegistry.delegate = self; self.pushRegistry.desiredPushTypes = [NSSet setWithObject:PKPushTypeVoIP]; //处理接收到的VoIP推送 (void)pushRegistry:(PKPushRegistry *)registry didReceiveIncomingPushWithPayload:(PKPushPayload *)payload forType:(PKPushType)type withCompletionHandler:(void(^)(void))completion then we send message from our server or from apple's cloud service: https://icloud.developer.apple.com/dashboard/notifications website services: when app is in foreground,withCompletionHandler wil be called correctly,but when app is in background or has killed ,withCompletionHandler not be called!!! the background fetch、voice over ip is checked in signing & capabilities tabs why?why?why?why?why?why?why?why?why?

We're trying to add simple notifications to our CarPlay integration that should open certain template when pressed, but the issue is that when pressing this notification on CarPlay screen nothing is invoked in the code (presumably didReceive should be invoked). All works fine with the same notification but pressed on the iPhone screen - didReceive is invoked properly. How should I handle the action when push notification is pressed on CarPlay screen?

Is there a public method to know when an APNS has appeared on the screen? wrapping up a very high end photogrammetry app, using the front facing camera and screen illumination- incoming notifications completely throw off the math. Ideally, it would be great to turn on Do Not Disturb for the short process, but we’d settle for just the detection of the notification banner. also: extra credit - programattically adjusting Auto Dimming, and True Tone would be lovely too.

Is there any information for developer about notification forwarding which is published in iOS 26.3? how to use it ?

Hello, I am developing a calling service using CallKit and VOIP push. I have occasionally encountered a strange issue. The issue is that VOIP permanently fails to receive calls. I was previously informed that even if the device is blocked, it can receive calls again after 24 hours. Also, when I checked the device logic, it complied with the policy requirements set by Apple, including correctly calling CallKit's reportNewIncomingCall method. Once the issue occurs, no matter how many times I try, VOIP does not receive calls, and neither a device reboot nor checking the Device Console Log shows any logs related to CallKit or VOIP. I suspect this might be an issue with the VOIP token, and I believe that the only way to get a new one is to reinstall the app. Is that correct? Of course, after reinstalling, it works fine again, but this is very inconvenient. I don't think this is the right solution. Is there anyone who can share their insights on this issue? Thank you.

Hey there my application allows users to have video calls with each other using Agora. I have successfully set up incoming call functionality on Android but on iOS I am struggling to get the call ui to appear when the app is not running/in background/locked. To my knowledge this is because there is much stricter security on iOS which is limiting me from calling this. When i initially set it up it worked at first when the app was in the background but I think I was failing to report the call to call kit in time and now it's not working. I'm not sure if I need access to this entitlement: com.apple.developer.pushkit.unrestricted-voip Which i believe is only for the big boys or if I make sure I'm reporting the call to call kit fast enough that I won't encounter this issue and it will consistently work in the background.

In the main app, is there a way to distinguish whether the application:didFinishLaunchingWithOptions: method is triggered by the user manually clicking the app icon, or whether it is automatically triggered by the system after Live Activities receives a remote message notification?

When subscription renewing , can do purchase_date faster than notification_date quickly? I received my app user purchase notification this purchase date is 2025-08-31 06:42:54(UTC) but notification date is 2025-08-30 22:45:01(UTC) how can you do this? I can't understand it please let me explain

Our mobile app uses a specific platform for subscription management. At this time,, it's integration with Apple notifications is built around the Server-to-Server Notifications v1 and the traditional verifyReceipt endpoint. At this time, it does not support Server-to-Server Notifications v2, nor has any published documentation or resources on a custom integration path using v2. Our app is built using Flutter and we handle purchases with the in_app_purchase plugin. However, due to the limitation on the system for subscription side, we need to connect to Apple’s legacy server-to-server subscription endpoints (StoreKit v1) to receive real-time notifications and validate receipts. Could you please provide information how to do it?

We are implementing a camera intercom calling feature using VoIP Push notifications (PushKit) and LiveCommunicationKit (iOS 17.4+). The app works correctly when running in foreground or background, but fails when the app is completely terminated (killed by user or system). After accepting the call from the system call UI, the app launches but gets stuck on the launch screen and cannot navigate to our custom intercom interface. Environment iOS Version: iOS 17.4+ (testing on latest iOS versions) Xcode Version: Latest version Device: iPhone (tested on multiple devices) Programming Languages: Objective-C + Swift (mixed project) Frameworks Used: PushKit, LiveCommunicationKit (iOS 17.4+) App State When Issue Occurs: Completely terminated/killed Problem Description Expected vs Actual Behavior App State Behavior Foreground ✅ VoIP push → System call UI → User accepts → Navigate to intercom → Works Background ✅ VoIP push → System call UI → User accepts → Navigate to intercom → Works Terminated ❌ VoIP push → System call UI → User accepts → App launches but stuck on splash screen → Cannot navigate Root Issues When app is terminated and user accepts the call: Data Loss: pendingNotificationData stored in memory is lost when app is killed and relaunched Timing Issue: conversationManager(_:perform:) delegate method is called before homeViewController is initialized Lifecycle Confusion: App initialization sequence when launched from terminated state via VoIP push is unclear Code Flow VoIP Push Received (app terminated): func pushRegistry(_ registry: PKPushRegistry, didReceiveIncomingPushWith payload: PKPushPayload, for type: PKPushType, completion: @escaping () -> Void) { let notificationDict = NotificationDataDecode.dataDecode(payloadDict) as? [AnyHashable: Any] let isAppActive = UIApplication.shared.applicationState == .active // Store in memory (PROBLEM: lost when app is killed) pendingNotificationData = isAppActive ? nil : notificationDict if !isAppActive { // Report to LCK try await conversationManager.reportNewIncomingConversation(uuid: uuid, update: update) } completion() } User Accepts Call: func conversationManager(_ manager: ConversationManager, perform action: ConversationAction) { if let joinAction = action as? JoinConversationAction { // PROBLEM: pendingNotificationData is nil (lost) // PROBLEM: homeViewController might not be initialized yet if let pendingData = pendingNotificationData { ModelManager.share().homeViewController.gotoCallNotificationView(pendingData) } joinAction.fulfill(dateConnected: Date()) } } Note: When user taps "Accept" on system UI, LiveCommunicationKit calls conversationManager(_:perform:) delegate method, NOT a manual acceptCall method. Questions for Apple Support App Lifecycle: When VoIP push is received and app is terminated, what is the exact lifecycle? Does app launch in background first, then transition to foreground when user accepts? What is the timing of application:didFinishLaunchingWithOptions: vs pushRegistry:didReceiveIncomingPushWith: vs conversationManager(_:perform:)? State Persistence: What is the recommended way to persist VoIP push data when app is terminated? Should we use UserDefaults, NSKeyedArchiver, or another mechanism? Is there a recommended pattern for this scenario? Initialization Timing: When conversationManager(_:perform:) is called with JoinConversationAction after app launch from terminated state, what is the timing relative to app initialization? Is homeViewController guaranteed to be ready, or should we implement a waiting/retry mechanism? Navigation Pattern: What is the recommended way to navigate to a specific view controller when app is launched from terminated state? Should we: Handle it in application:didFinishLaunchingWithOptions: with launch options? Handle it in conversationManager(_:perform:) delegate method? Use a notification/observer pattern to wait for initialization? Completion Handler: In pushRegistry:didReceiveIncomingPushWith, we call completion() immediately after starting async reportNewIncomingConversation task. Is this correct, or should we wait for the task to complete when app is terminated? Best Practices: Is there a recommended pattern or sample code for integrating LiveCommunicationKit with VoIP push when app is terminated? What are the best practices for handling app state persistence and navigation in this scenario? Attempted Solutions Storing pendingNotificationData in memory → Failed: Data lost when app is killed Checking UIApplication.shared.applicationState → Failed: Doesn't reflect true state during launch Calling gotoCallNotificationView in conversationManager(_:perform:) → Failed: homeViewController not ready Additional Information Singleton pattern: LCKCallManagerSwift, ModelManager homeViewController accessed via ModelManager.share().homeViewController Mixed Objective-C and Swift architecture conversationManager(_:perform:) is called synchronously and must call joinAction.fulfill() or joinAction.fail() Requested Help We need guidance on: Correct app lifecycle handling when VoIP push is received in terminated state How to persist VoIP push data across app launches How to ensure app initialization is complete before navigating Best practices for integrating LiveCommunicationKit with VoIP push when app is terminated Thank you for your assistance!

Hello, We are experiencing an issue related to push notifications after updating devices to iOS 26.4 Beta. Our system stores push notification tokens on the server by associating the device token with the device’s IDFV in the app. After updating a device to iOS 26.4 Beta, we observed that the device token from a previously uninstalled version of the app remains valid for more than a week. As a result, two push notifications are delivered to the same device. The situation is as follows: The user installs the app and a device token is generated. The user uninstalls the app. Later, the user installs the app again and a new device token is generated. However, the previous device token does not become invalid, even after more than a week. Because IDFV changes when the app is reinstalled, our server cannot determine that the device belongs to the same user. Therefore, we cannot overwrite the old token with the new one on the server side. Could you please advise: Is this behavior expected in iOS 26.4 Beta? How long does it normally take for a device token to become invalid after an app is uninstalled? What is the recommended approach to prevent duplicate push notifications in this situation? Any guidance would be greatly appreciated. Best regards

Good day We developed a simple swift code to make the device ringing when a certain type of notifications arrives from our backend. This is the code: let phoneNumber = CXHandle(type: .generic, value: (self.userInfoForPluginCall!["data"] as! [String:Any]) ["caller"] as! String) callUpdate.remoteHandle = phoneNumber let configuration = CXProviderConfiguration(localizedName: "Trec Conf") configuration.maximumCallGroups = 1 configuration.maximumCallsPerCallGroup = 1 configuration.supportsVideo = false configuration.supportedHandleTypes = [.generic] configuration.iconTemplateImageData = UIImage(named: "callkit-icon")?.pngData() let callProvider = CXProvider(configuration: configuration) callProvider.setDelegate(self, queue: nil) callProvider.reportNewIncomingCall(with: callUUID!, update: callUpdate, completion: {error in}) We are noticing some problems on the call screen: on certain devices (iOS 18.4RC) the normal call screen appears and the user can answer or decline the call, on other devices (iOS 18.3, especially with dynamic island) only a phone icon appears in the upper right corner and no possibility to answer or deny call. Any idea on why we are encountering that behavior? Thanks

In macOS, how can I use UnmutableNotificationContent notifications to prevent the main window from activating when clicking the notification? code： import Cocoa import UserNotifications // Mandatory import for notification functionality class ViewController: NSViewController { override func viewDidLoad() { super.viewDidLoad() // Automatically request permissions and send a test notification when the view loads sendLocalNotification() } /// Core method to send a local notification func sendLocalNotification() { let notificationCenter = UNUserNotificationCenter.current() // 1. Request notification permissions (Mandatory step; user approval required) notificationCenter.requestAuthorization(options: [.alert, .sound, .badge]) { [weak self] isGranted, error in guard let self = self else { return } // Handle permission request errors if let error = error { print("Permission request failed: \(error.localizedDescription)") return } // Exit if user denies permission if !isGranted { print("User denied notification permissions; cannot send notifications") return } // 2. Construct notification content using UNMutableNotificationContent let notificationContent = UNMutableNotificationContent() notificationContent.title = "Swift Notification Test" // Notification title notificationContent.subtitle = "macOS Local Notification" // Optional subtitle notificationContent.body = "This is a notification created with UNMutableNotificationContent" // Main content notificationContent.sound = .default // Optional notification sound (set to nil for no sound) notificationContent.badge = 1 // Optional app icon badge (set to nil for no badge) // 3. Set trigger condition (here: "trigger after 3 seconds"; can also use time/calendar triggers) let notificationTrigger = UNTimeIntervalNotificationTrigger( timeInterval: 3, // Delay in seconds repeats: false // Whether to repeat (false = one-time only) ) // 4. Create a notification request (requires a unique ID for later cancellation if needed) let notificationRequest = UNNotificationRequest( identifier: "SwiftMacNotification_001", // Unique identifier content: notificationContent, trigger: notificationTrigger ) // 5. Add the request to the notification center and wait for triggering notificationCenter.add(notificationRequest) { error in if let error = error { print("Notification delivery failed: \(error.localizedDescription)") } else { print("Notification added to queue; will trigger in 3 seconds") } } } } }

Hi everyone, We're experiencing an issue with our Flutter app that uses PushKit, CallKit, and Janus for handling VoIP calls. Everything works fine when the app is in the foreground, but when the app is in the background or completely closed (terminated state), the behavior is inconsistent: Sometimes, incoming calls are received as expected. Other times, the app does nothing, and the call is not delivered at all. Upon checking the console logs, we noticed that our app is being canceled (terminated by the system), which seems to be the reason why calls are not coming through. This happens randomly, making it difficult to reproduce consistently. Additional Details: The app is configured to handle VoIP notifications correctly. We are using PushKit to wake up the app and trigger CallKit for the incoming call UI. When the app is active, calls are handled correctly via Janus WebRTC signaling. We have verified that background modes for VoIP are enabled in the Info.plist. We suspect that iOS may be aggressively killing the app in the background, preventing incoming call notifications from reaching it. Questions: Has anyone experienced similar behavior with PushKit + CallKit on recent iOS versions? Could iOS be terminating the app due to background execution policies? Are there recommended best practices to ensure reliable delivery of VoIP notifications when the app is closed? Any insights or suggestions would be greatly appreciated! Thanks! Addional Information: this is the cancellation information at console: Received incoming message on topic hiperme.app at priority 10 por omisión 17:10:18.462084-0300 dasd CANCELED: com.apple.pushLaunch.hiperme.app:E8BACD at priority 10

I am developing an iOS app that uses App Store Server API (v2) for auto-renewable subscriptions. I noticed a discrepancy between the expiration date returned by the API and the date displayed in iPhone Settings > Subscriptions: App Store Server API expiresDate: 2025-09-12T12:10:25 (KST) iOS Settings > Subscriptions: 2025-09-11 (one day earlier) My understanding: The API’s expiresDate is the precise UTC timestamp. The Settings UI might display the "last full calendar day" for UX purposes. Questions: Is this behavior (UI showing one day earlier) an intentional Apple policy? If so, is there any official documentation or guideline explaining this behavior? Should developers always rely on the API’s expiresDate for subscription state management? This discrepancy is confusing for both developers and end users, so any clarification or official reference would be greatly appreciated.

Hi Apple team, We’re shipping a Live Caller ID Lookup extension on iOS 18 and have a question about the automatic refresh of configuration/PIR parameters. Questions 1. Is there any documented interval/TTL (min/max) for the system’s automatic refresh of /config and PIR parameters, or is it entirely opportunistic (battery/network/usage)? I can’t find a cadence in the IdentityLookup docs. 2. Does iOS honor server cache headers (e.g., Cache-Control/Expires) to influence when it re-fetches? 3. Which events also trigger a refresh (enable/disable in Settings, OS/app update, device reboot, token/epoch change)? 4. Are there rate limits or best-practice limits for calling refreshExtensionContext and refreshPIRParameters?

I’m getting calls from Pakistan every hour. I cant block them because it’s a different number every time. I have downloaded the new beta version of the upcoming software update and it allows you to set to ask a question before unknown callers ring through. It’s not working and my phone is constantly ringing. I can’t block unknown callers as I use my phone for work. How can I silence ringing from calls specifically from Pakistan Using the country code?

I wanted to know if Apple ever supported displaying a red dot on notificationswith no indication number.

手机型号：iPhone 13 Pro iOS版本号：iOS 18.6.2 (22G100) 用户开启了应用的系统通知功能，在收到离线推送后应用右上角展示未读消息数。在APP启动或者从后台恢复的时候，应用会用如下方法清理应用桌面图标的未读数角标。但是在部分机型上，应用转为“后台模式”时仍然会出现一个未读角标，且每次都是一个固定值；如果直接kill进程就不会出现未读角标。请问如何能够【完全】清理消息未读数，确保不会在退后台的时候再次出现呢？ [[UIApplication sharedApplication] setApplicationIconBadgeNumber:0]; [[UIApplication sharedApplication] cancelAllLocalNotifications]; if (@available(iOS 16.0, *)) { [[UNUserNotificationCenter currentNotificationCenter] setBadgeCount:0 withCompletionHandler:nil]; [[UNUserNotificationCenter currentNotificationCenter] removeAllPendingNotificationRequests]; [[UNUserNotificationCenter currentNotificationCenter] removeAllPendingNotificationRequests]; } UNMutableNotificationContent *content = [[UNMutableNotificationContent alloc] init]; content.badge = @(-1); UNNotificationRequest *request = [UNNotificationRequest requestWithIdentifier:@"clearBadge" content:content trigger:nil]; [[UNUserNotificationCenter currentNotificationCenter] addNotificationRequest:request withCompletionHandler:^(NSError * _Nullable error) { // Do nothing }];

Hello, We are trying to implement Actionable Notifications on iOS via Remote Notifications. According to Apple’s official documentation (Declaring Your Actionable Notification Types), it is recommended to register notification categories at launch time. However, in our use case, the number of buttons and their actions in the Actionable Notification are determined at the time of the Remote Notification request. This means that we cannot predefine the categories at app launch but need to dynamically configure them based on the payload of the Remote Notification. Our Approach We are considering setting aps.mutable-content = 1 and using Notification Service Extension to modify the categoryIdentifier dynamically. Below is the JSON payload we plan to use for Remote Notifications: { "aps": { "alert": { "title": "New Message Received!", "body": "Check out the details." }, "category": "DYNAMIC_CATEGORY", "mutable-content": 1 }, "categoryData": { "id": "DYNAMIC_CATEGORY", "actions": [ { "id": "REPLY_ACTION", "title": "Reply", "options": ["foreground"] }, { "id": "DELETE_ACTION", "title": "Delete", "options": ["destructive"] } ] } } Questions: Can we dynamically configure Actionable Notifications based on the Remote Notification payload? If we set categoryIdentifier in Notification Service Extension’s didReceive(_:withContentHandler:), will users still see the correct action buttons even if the app is terminated? What is the recommended approach to dynamically configure Actionable Notifications at the time of receiving the Remote Notification, rather than at app launch?