Overview

I added a Content Filter to my app, and when running it in Xcode (Debug/Release), I get the expected permission prompt: "Would like to filter network content (Allow / Don't Allow)". However, when I install the app via TestFlight, this prompt doesn’t appear at all, and the feature doesn’t work. Is there a special configuration required for TestFlight? Has anyone encountered this issue before? Thanks!

Hello everyone, I’m currently experiencing unusually long wait times for app reviews and wanted to check if others are seeing similar delays this week. Here is the current status of my submissions: App Store Update: Stuck in "Waiting for Review" much longer than the typical 24–48 hour window. New Version: A newly submitted version also seems to be stalled in the initial phase. TestFlight Processing: Even TestFlight builds are taking longer than usual to process. Expedited Review: I've attempted an expedited review request and direct communication, but the status remains unchanged so far. What’s confusing is that I see other apps in the same category receiving updates, so I’m unsure if this is a localized technical glitch or a broader delay affecting a specific group of developers. I’m not looking to escalate anything just yet; I’m simply trying to gauge if this is a widespread issue at the moment. I would greatly appreciate any insights into your recent experiences or if you've noticed similar patterns over the last few days. Thanks in advance, and good luck to everyone with pending submissions! 🙂

Здравствуйте. Подскажите пожалуйста, кто решил данную проблему? Спасибо.

Hello, I am trying out Xcode Cloud for the first time. I could connect to Github in the initial setup and had a few failed builds (package resolution error), which I resolved fairly quickly. Now whenever I am trying to build, I get the following error: Xcode Cloud is unable to connect to the repository “<respository-name>”. Reconnect the repository to resume builds. I am unable to remove the connection from settings as well because it's stuck in a loading state. Is there a way to fix this?

I'm trying to run my app on my iPhone and XCode is unable to detect it. Versions (as of time of writing, these are all the latest versions) XCode: 15.0.1 iOS: 17.1.2 macOS: Sonoma 14.1.2 What I've tried Updating all hardware to the latest versions. Restarting all hardware. Clearing cache/derived data. Using different USBC ports/cables. Using the XCode 15.1-Beta 3 (the latest beta) Clearing trusted computers and re-trusting Disabling Multipath Networking (solution for someone else on the dev forums) Creating a brand new xcode project. Disabling all wifi/bluetooth and reconnecting Using different wifi networks Calling mac support (they directed me back here) Scouring forums What happens I start by disconnecting my phone from my computer, clear trusted computers, restart xcode, and start (basically) from a completely blank slate. First I open XCode to my project. Then I connect my iPhone via USBC. I see that XCode says "iPhone not eligible while pairing in progress" (or something like that). I see on my phone that I must trust this computer, I hit trust, I enter my phone's passcode, then that disappears on my phone, and in XCode the message about eligibility disappears. I then click on the device selector to choose between either a simulator or a hardware device and under hardware I only see a message that says "No eligible devices connected to my mac". If I open the "Manage Run Destinations" organizer I see all the simulators there in the simulators tab, but when I go to the Devices tab, I see nothing. Sometimes when I go through this process, I can get a banner to appear up top, but still no device shows up on the left. The banner will show me that it is indeed my iPhone, but it will be missing information like "Serial Number" or "Capacity". Here's a screenshot of what I see. Keep in mind, this banner up top does not always show up when I go through this process. iPhone CAN be detected on my other laptop When I do this exact same thing on my other laptop, everything works just fine. Here are the specs I'm running on that laptop. (using the same cable/wifi network/etc) XCode 15.0.1 macOS: Ventura 13.6.1 iPhone 17.1.2 (I'm using the same iPhone) The only difference here being the macOS version. However, the problem started on my "broken" computer while I was running a previous major macOS version. This problem is actually what prompted my to do a system update to Sonoma. Please for the love of god, halp!!!

When adding new TestFlight users, they are not receiving the email invite. I have had them check junk mail and/or other filtering software. Is anyone experiencing the same thing?

I Keep getting this error if I try to enroll in the developer program, why is this? Please tell me how to fix this of why this is happening!

When I use the .zoom transition in a navigation stack, I get a glitch when interrupting the animation by swiping back before it completes. When doing this, the source view disappears. I can still tap it to trigger the navigation again, but its not visible on screen. This seems to be a regression in iOS 26, as it works as expected when testing on iOS 18. Has someone else seen this issue and found a workaround? Is it possible to disable interrupting the transition? Filed a feedback on the issue FB19601591 Screen recording: https://share.icloud.com/photos/04cio3fEcbR6u64PAgxuS2CLQ Example code @State var showDetail = false @Namespace var namespace var body: some View { NavigationStack { ScrollView { showDetailButton } .navigationTitle("Title") .navigationBarTitleDisplayMode(.inline) .navigationDestination(isPresented: $showDetail) { Text("Detail") .navigationTransition(.zoom(sourceID: "zoom", in: namespace)) } } } var showDetailButton: some View { Button { showDetail = true } label: { Text("Show detail") .padding() .background(.green) .matchedTransitionSource(id: "zoom", in: namespace) } } }

I'm using one UITabBarController which leads to 6 NavigationController. Therefore the user will get 4 icons displayed and one icon with three points to see the rest of the Navigation Controller. If the user now tries to edit the list and moves one item from the hidden area towards the TabBar at the bottom, the App crashes with the error: Exception NSException * "Can't add self as subview" 0x0000600000d16040 I can see this effect at least on both my apps. If the same compilation is run on a older iOS version, there is no crash. Is there anything I have to take care of the configuration of the TabBar, when it comes to iOS26?

Hello. I have an 12 year old app that still has some objective-c code in it. I have a place where i have a flip animation between 2 view controllers that looks like this: [UIView transitionFromView:origView toView:newViewController.view duration:0.5 options:UIViewAnimationOptionTransitionFlipFromRight completion:nil]; It has looked like this since 2012 at least. In our production release, it works prior to 26.1, but in 26.1 and 26.2, the flip is off-center and looks weird. it's like both edges flip the same way. It's a little bit hard to explain. If seen at least 2 other app store apps that i have installed behave this way too, from 26.1 and onwards. Anyone else seen this? Is there anything that can be done about it? Thankful for thoughts.

We have developed a Parental/Self control app using Screen time API. We have used individual authentication to authorize the app, using the instructions here: https://developer.apple.com/documentation/familycontrols/authorizationcenter The problem is , that individual auth can be disabled easily , by the following steps: enter Settings app. in Settings app, click on the Parental/Self control app. click to disable screen time restriction. show the device owner's face/fingerprint. (or pin code) Why is that a problem: Parental control apps, or self-control apps, are about giving control to the software, To make it hard for the user to disable the restrictions. So using the flow I have introduced above, it's super-easy for a user to disable his Parental control restrictions, which misses the entire point of Parental/Self control idea. Furthermore, not only the user have the means to unlock his screen time restrictions, he also MUST have the means to unlock it. This makes Screen time (with individual auth) useless: I have a code ready to make a great parental control app for my clients, with amazing ideas, but I can't use the Screen time API unless this problem is fixed. Why child-parent auth is not enough: My clients are grownups people between ages of 15-40, that are interested in self-control, so they don't have iCloud child accounts. also, the child-parent auth solution forces my clients to give some control to other person, and my clients prefer their privacy. Some of them prefer self-control and not parental-control. What I suggest as a solution: 1: Give more options to users how to disable the Screen time restrictions. including: a second faceID / FingerPrint (that isn't the same as the one used to unlock the device) a second pin password. a string password 2: Give the users the option to choose to not have the device's owner Face/Finger/Pincode ID , as a method to disable the Screen time restrictions.

My MacBook Pro M5 running MacOS Tahoe 26.3 beta fails to detect two identical ASUS ROG Swift OLED PG32UCDM monitors simultaneously. Only one display is recognized at a time. One potential root cause might be that both monitors report identical binary EDID serial numbers (0x01010101), and the MacBook Pro M5 appears to use this value exclusively for display identity rather than combining it with other more detailed information (e.g., port, or alphanumeric serial number). I've verified that the monitor EDID binary serial numbers are in fact identical -- however the alphanumerical serial numbers are not identical. NOTE: This behavior is specific to the MacBook Pro M5 — when connecting both monitors via usb-c to a Mac Mini M4 Pro running the same MacOS Tahoe 26.3 beta, the monitors work fine. The OS detects both and assigns different names to them (PG32UCDM (1) and PG32UCDM (2)). NOTE: I could be wrong about this root cause, I don't have a way to disprove it, though the fact the monitors work fine on a Mac Mini is suspicious. What I have tried: Connecting the two monitors using different monitor ports (one on DisplayPort, another on HDMI, etc.), and different MacBook ports (one on HDMI, another on USB-C, etc.) Bumping down the resolution on the monitors to "1920x1080 (low resolution)" and 30Hz to rule out bandwidth issues. Connecting one, or both, monitors to CalDigit TS5 Plus dock. Neither alternate configuration yields the device recognizing both screens. Using BetterDisplay to import a manually-edited EDID for the screen, with a different binary EDID value, manufacturer name, etc. I've also verified that if I plug in my Apple Studio Display as one of the monitors, then the MacBook recognizes both one of the PG32UCDM monitors and the Studio Display at the same time. The issue seems to occur only when both monitors plugged into it are the same PG32UCDM model. When I have both monitors plugged into my MacBook, each time I disconnect the cable to whichever monitor is currently recognized, it immediately recognizes the other monitor. Plugging the cable for the disconnected monitor back in has no effect. I'm at a loss. Has anyone run into this issue and found a successful workaround that is not one of the approaches I've described above?

Hi there, Starting with iOS 26.2 RC, all my DeviceActivityMonitor.eventDidReachThreshold get activated immediately as I pick up my iPhone for the first time, two nights in a row. Feedback: FB21267341 There's always a chance something odd is happening to my device in particular (although I can't recall making any changes here and the debug logs point to the issue), but just getting this out there ASAP in case others are seeing this (or haven't tried!), and it's critical as this is the RC. DeviceActivityMonitor.eventDidReachThreshold issues also mentioned here: https://developer.apple.com/forums/thread/793747; but I believe they are different and were potentially fixed in iOS 26.1, but it points to this part of the technology having issues and maybe someone from Apple has been tweaking it.

Hi, As a company, we have several apps in the AppStore that contain AppClips. With the latest iOS18 it works without any problems. With all iOS26 betas so far, however, there is always the problem “ASDErrorDomain- Error 507” and the AppClip cannot be opened. You can easily test this by scanning the following QR code with the system camera: You only ever get this error instead of the option to open the AppClip. As the iOS26 beta phase is already at an advanced stage, we are naturally concerned as to whether the problem will be solved.

Not quite but maybe sorta related to the errOSAInternalTableOverflow problem I asked about in a different thread, this one deals with crashes our app gets (and much more frequently lately after recent OS updates (15.7.3) are OK'd by our IT department). Our app can run multiple jobs concurrently, each in their own NSOperation. Each op creates its own SBApplication instance that controls unique instances of InDesignServer. What I'm seeing recently is lots of crashes happening while multiple ops are calling into ScriptingBridge. Shown at the bottom is one of the stack crawls from one of the threads. I've trimmed all but the last of our code. Other threads have a similar stack crawl. In searching for answers, Google's AI overview mentions "If you must use multiple threads, ensure that each thread creates its own SBApplication instance…" Which is what we do. No thread can reach another thread's SBApplication instance. Is that statement a lie? Do I need to lock around every ScriptingBridge call (which is going to severely slow things down)? 0 AE 0x1a7dba8d4 0x1a7d80000 + 239828 1 AE 0x1a7d826d8 AEProcessMessage + 3496 2 AE 0x1a7d8f210 0x1a7d80000 + 61968 3 AE 0x1a7d91978 0x1a7d80000 + 72056 4 AE 0x1a7d91764 0x1a7d80000 + 71524 5 CoreFoundation 0x1a0396a64 __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION__ + 28 6 CoreFoundation 0x1a03969f8 __CFRunLoopDoSource0 + 172 7 CoreFoundation 0x1a0396764 __CFRunLoopDoSources0 + 232 8 CoreFoundation 0x1a03953b8 __CFRunLoopRun + 840 9 CoreFoundation 0x1a03949e8 CFRunLoopRunSpecific + 572 10 AE 0x1a7dbc108 0x1a7d80000 + 246024 11 AE 0x1a7d988fc AESendMessage + 4724 12 ScriptingBridge 0x1ecb652ac -[SBAppContext sendEvent:error:] + 80 13 ScriptingBridge 0x1ecb5eb4c -[SBObject sendEvent:id:keys:values:count:] + 216 14 ScriptingBridge 0x1ecb6890c -[SBCommandThunk invoke:] + 376 15 CoreFoundation 0x1a037594c ___forwarding___ + 956 16 CoreFoundation 0x1a03754d0 _CF_forwarding_prep_0 + 96 17 RRD 0x1027fca18 -[AppleScriptHelper runAppleScript:withSubstitutionValues:usingSBApp:] + 1036

I'm submitting my first macOS app (an Electron app, signed with Developer ID Application certificate and hardened runtime) for notarization using xcrun notarytool submit with App Store Connect API key authentication. All 6 of my submissions have been stuck at "In Progress" for over 24 hours now. The oldest submission is 27+ hours old. None have transitioned to Accepted or Invalid. Here's what I've verified: Code signing is valid: codesign --verify --deep --strict passes Hardened runtime is enabled Uploads succeed: Each submission receives a valid submission ID and the file uploads successfully to Apple's servers API key auth is working: Using App Store Connect API key (.p8 file), Key ID, and Issuer ID Tried both locally and via GitHub Actions CI — same result Polling Apple's status endpoint eventually times out with NSURLErrorDomain Code=-1001 "The request timed out" when checking https://appstoreconnect.apple.com/notary/v2/submissions/<id> Logs are not available (notarytool log returns "not yet available" for all submissions) Apple Developer System Status shows "Developer ID Notary Service" as Available Submission history: createdDate: 2026-02-04T20:27:16Z — status: In Progress createdDate: 2026-02-04T16:45:18Z — status: In Progress createdDate: 2026-02-04T13:40:23Z — status: In Progress createdDate: 2026-02-04T12:29:52Z — status: In Progress createdDate: 2026-02-04T11:26:36Z — status: In Progress createdDate: 2026-02-04T11:21:39Z — status: In Progress Entitlements used: com.apple.security.cs.allow-jit com.apple.security.cs.allow-unsigned-executable-memory com.apple.security.cs.disable-library-validation com.apple.security.network.client com.apple.security.files.user-selected.read-write This is my first time notarizing any app on this developer account. I've seen other threads mentioning that first-time submissions can be "held for in-depth analysis," but 24+ hours with no feedback at all seems excessive. Is anyone else currently experiencing this? Is there anything I can do to unblock my account's notarization queue, or do I just need to wait? Any guidance from DTS would be greatly appreciated. I've also emailed Apple Developer Support but haven't received a response yet.

Hello! I've been trying to automate tests using Appium/XCUITests in a React Native APP, but I'm finding many blockers. They are related to the amount of nested elements in the "DOM" in which the XCUItest can not go deeper to get all the elements we need. snapshotMaxDepth -> The XCUITest does not support more than 60 value, otherwise it returns the following error: Got response with status 404: {"value":{"error":"stale element reference","message":"The previously found element "Application 'xyz.xxx.xxx'" is not present in the current view anymore. Make sure the application UI has the expected state. Original error: Error kAXErrorIllegalArgument getting snapshot for element <AXUIElementRef 0x600003aaf750> {pid=95967} {uid=[ID:1 hash:0x0]}","traceback":"(\n\t0 CoreFoundation 0x00007fff20405604 __exceptionPreprocess + 242\n\t1 libobjc.A.dylib 0x00007fff201a4a45 objc_exception_throw + 48\n\t2 WebDriverAgentLib 0x000000010a3caa53 -[XCUIElement(FBUtilities) fb_takeSnapshot] + 723\n\t3 WebDriverAgentLib 0x000000010a3cad07 -[XCUIElement(FBUtilities) fb_snapshotWithAttributes:maxDepth:] + 183\n\t4 WebDriverAgentLib 0x000000010a37baea +[FBXPath writeXmlWithRootElement:indexPath:elementStore:includedAttributes:writer:] + 778\n\t5 WebDriverAgentLib 0x000000010a37b12c +[FBXPath xmlRep... But if I inform less than 60, the XCUITest is not able to get all the elements we need to automate: There are many threads about this, all of them the issue is in the XCUITest: https://github.com/appium/appium/issues/14825 https://discuss.appium.io/t/handling-staleelementreferenceexception/35095/11 https://github.com/appium/appium/issues/18085 https://discuss.appium.io/t/error-in-appium-desktop-refreshing-source-after-adding-snapshotmaxdepth-greater-than-62/34058 https://stackoverflow.com/questions/74235441/appium-cant-reach-elements-in-ios-source-tree-they-are-too-deep-works-fine-in Tested all possible solutions suggested in the threads, but I will have the issue.

Hello everyone, I’m looking for some guidance to see if anyone has experienced a similar issue with the Apple Developer Program membership. About one week ago, I completed the payment for the membership. I received an email with the subject: We’re processing your order Wxxxxxxxxxx That email included the order details and cost, and shortly after that, I also received the CFDI invoice for the payment, so the charge appears to have been completed successfully. However, up to now: I have not received any membership confirmation email The membership does not appear under Subscriptions in my Apple ID It is not active in the Apple Developer app On the Apple Developer website, I still see the usual message as if the membership was not purchased: “Purchase your membership to continue your enrollment. Buy today” I understand Apple mentions that the purchase may take up to 48 hours to process, but it has now been more than a week with no changes. Has anyone else encountered this situation? Is it normal to receive the invoice but not have the membership activated? Would you recommend contacting Apple Developer Support at this point? Thanks in advance for any help or shared experiences.

Hi there, I recently updated to the latest version of macOS Tahoe 26.3. Since then, Xcode is not able to resolve my Swift Package dependencies anymore. We use SSH for all our Github hosted packages. When package resolution is running, we randomly have Failed to verify SSH fingerprint on some remote package. Nothing has changed and it worked perfectly with Tahoe 26.2. The SSH have been reconfigured and known hosts have been verified. Is something changed between those 2 versions or is it a bug ?

Announcing the Swift Student Challenge 2026 Every year, Apple’s Swift Student Challenge celebrates the creativity and ingenuity of student developers from around the world, inviting them to use Swift and Xcode to solve real-world problems in their own communities and beyond. Learn more → https://developer.apple.com/swift-student-challenge/ Submissions for the 2026 challenge will open February 6 for three weeks, and students can prepare with new Develop in Swift tutorials and Meet with Apple code-along sessions. The Apple Developer team is here is to help you along the way - from idea to app, post your questions at any stage of your development here in this forum board or be sure to add the Swift Student Challenge tag to your technology-specific forum question. Your designs. Your apps. Your moment.