I have a problem with the wall plane detection using visionOS/ARKit: I am using ARKitSession's PlaneDetectionProvider detection.wall in the space of visionOS. I recorded the position and rotation information of the first detected plane, but found that the rotation value will be facing when the user starts the space. There is a deviation in different directions. That is to say, even if the plane is located on the same wall, the rotation quaternion will be different. I hope that no matter from which direction the user enters the scan, the real direction of the wall can be correctly obtained so that the virtual content can be accurately aligned with the wall. I have tried to use anchor.originFromAnchorTransform or Transform.rotation directly, but the rotation value is still affected by the user's initial orientation. In addition, I would like to know whether the user's initial orientation will affect the location information. If so, please provide a solution. Thank you!

I thought the ARCoachingOverlayView was a nice touch, so each apps ARKit coaching was recognizable and I used it in my ARView/ARSCNView based apps. Now with RealityView, is there any replacement planned? Or should we just use UIViewRepresentable and wrap ARCoachingOverlayView?

Recently, questions about ARKit/visionOS seem to be being asked in the Apple forum by internal Apple engineers. Inexperienced and untested makeshift features are being offered, putting average but experienced developers in a difficult position. They are unable to react and get something useful from the posts. Apple needs to review the situation.

I have a visionOS app where I instantiate ARKitSession and various providers (HandTrackingProvider and WorldTrackingProvider) in my appModel. That way, I can pass these providers to a Task which runs a gRPC server for sending the data from these providers to a client. When the users enters the immersive space of the app, the ARKitSession will run the providers if they are not running already. I am now trying to implement the AccessoryTrackingProvider with the PSVR sense controllers but it does not fit with my current framework because the controllers may not be connected when the ARKitSession.run function is called. So I need to find a new place to start the session. My question is, if I already have a session which is running the hand and world tracking providers, can I start another session to run the accessory tracking? Should they all be running on the same session? Is there a way to stop the session and restart it when the controllers are connected? When I tried this, I get an error that says "It is not possible to re-run a stopped data provider (<ar_hand_tracking_provider_t: " but if I instantiate a new HandTrackingProvider, then the one that got passed to the gRPC task would no longer be the one running in the new session. Any advice on how best to manage the various providers and ARKit sessions would be greatly appreciated.

I am developing an IOS App that allow users to scan rooms, view the scans on device, and add notes. I need to preserve actual geometry (odd angles, chamfers, fixtures), not simplified RoomPlan boxes. Are there any easy ways to incorporate high quality texture mapping or PBR? Where is the documentation for scene reconstruction?

While using apple's vision pro, we noticed that we can continue to use the visionOS keyboard when we no longer actually see it in passthrough. In other words, when we focus on a field to type, visionOS displays the keyboard for us in such a way that we actually see it. Then, we noticed if we look away a little bit, either up, or down, or left, or right, in such a way that the keyboard is no longer visible by us in the passthrough, the keyboard still remains responsive to taps from our fingers at the location where it is. It seems the keyboard remains functional and responsive to taps even though we can no longer observe/see it. We are trying to figure out how to implement similar functionality in our app whereby the user can continue to manipulate a 3d entity when the user can no longer actually observe it in passthrough (like the visionOS keyboard appears to allow). I assume the visionOS keyboard has this functionality thanks to the downward facing sensors on the hardware that allow hand tracking even though the hands can no longer be observed by the user. That is likely how we can rest our hands on our lap is still be able to interact with visionOS. How can we implement a similar functionality for 3D entities? Is there a way to tap in, or to allow hand tracking, from those toward facing cameras? Is it possible to manipulate a 3D entity when it is no longer observed by the user for example when they shift their attention somewhere else in the field of vision? How does the visionOS keyboard achieve this?

I use ARKit's hand tracking to attach a 3D model of a remote control to the left hand. The user is supposed to press buttons on the remote control. In the Vision Pro settings, I have removed the left hand from Hands & Eye Tracking. Only the right hand is used. The problem now is that the left hand appears and the 3D model of the remote control fades out. I want the remote control to be completely visible. The user should feel like they really have the remote control in their hand. Can I prevent the fading out?

Hi there, I received an enterprise license file to include enhanced object tracking configuration for the Vision Pro. My account is part of the team which got the allowance from Apple to use this capability. Unfortunately, although I followed the guide, I do not find the Object Tracking capability when I try to add it to my project. There are other capabilities like Main Camera on the Vision Pro, but not for Object Tracking. I am using Xcode 26.1 and visionOS 26.1. What am I missing here? Thanks in advance, Matthias

The samples shown in volumetric work great but moving to an immersive experience the pen physical buttons don't work when you're focusing to an entity with a collision.

ARSession provides video stream from the wide angle camera. If ARSession uses the ultra wide camera at the same time, ARSession may provide video stream from that camera, otherwise AVCaptureSession with an ultra wide camera should be allowed to launch. It would be very very useful if we can access different cameras while ARSession is running. We'd like to cooperate with you if possible. Steps to reproduce: run an AVCaptureSession and then run an ARSession. The AVCaptureSession stops.

I have a ModelEntity with GroundingShadowComponent entity.enumerateHierarchy { child, stop in child.components.set(GroundingShadowComponent(castsShadow: true)) } When I set it on the table, I can see the shadow on the table, even if I disable plane detection. However, when I enable plane detection, and the plane's material is OcclusionMaterial. I can not see the shadow on the table. As far as I know, receivesDynamicLighting is not usable in VisionOS. So how can I cast shadow on OcclusionMaterial in VisionOS? Or rather, is it possible to have the shadow properly displayed on the tabletop while ensuring that I cannot see objects beneath the table through it?

Hi, is there a way to track feet in a visionOS app in an immersive space? I want the whole body to be visible in VR, and I want to know if the user touches an object with their foot.

Error: RoomCaptureSession.CaptureError.exceedSceneSizeLimit Apple Documentation Explanation: An error that indicates when the scene size grows past the framework’s limitations. Issue: This error is popping up in my iPhone 14 Pro (128 GB) after a few roomplan scans are done. This error shows up even if the room size is small. It occurs immediately after I start the RoomCaptureSession after the relocalisation of previous AR session (in world tracking configuration). I am having trouble understanding exactly why this error shows and how to debug/solve it. Does anyone have any idea on how to approach to this issue?

As I understand it there are two ways I can track a hand, or a joint, in RealityKit: either, create an AnchorEntity, for example AnchorEntity(.hand(.left, location: .palm)) or, set up an ARSession with a HandTrackingProvider ( a lot more code which I haven't repeated here). Assuming this is correct, when would I want to use one over the other?

We applied for the visionOS enterprise permission license, which can help us improve object tracking capabilities on Vision Pro. However, we are unsure how to use it in Unity, specifically how to implement object tracking in Unity and increase the tracking speed.

In ARKit for visionOS, I can track the user's head with a HeadAnchor, but it will not give the location. However, I can get the device's transform by calling queryDeviceAnchor(atTimestamp: CACurrentMediaTime()) on a WorldTrackingProvider. Why the difference? - if I know the device's transform, I effectively know the head's transform.

I am using Entity of RealityKit to display virtual content, however I find that sometimes the real object in front of the virtual content can not occulude the virtual content. For example, I place an Entity in a room, but when I walk into another room, I can still see the Entity through the wall. I wonder how should I fix the problem. Thank you!

I am currently creating an app where two people share an instance of an immersive space so that they are able to point to certain things in the immersive space. Right now, other people are hidden behind the immersive space, and even with people awareness enabled for everything, people are still too difficult to see. I've found this documentation (https://developer.apple.com/documentation/arkit/occluding-virtual-content-with-people) which describes what I want to do, but it is only listed as working on iOS an iPadOS. Is there anything similar to this that will work on VisionOS?

Is it possible to detect distance from the vision pro to real live objects and people? I tried using scene.raycast to perform a raycast forward from the center of the viewport, but it doesn't seem to react to real life objects, only entities. I see mentioned here: https://developer.apple.com/forums/thread/776807?answerId=829576022#829576022, that a raycast with scene reconstruction should allow me to measure that distance, as long as the object is non-moving. How could I accomplish that?

As far as I know, Apple hasn’t opened access to the Vision Pro camera for developers yet, so I’m trying to find possible workarounds within the current capabilities. I’m wondering if there’s any way to apply a mesh to a person in the scene in Vision Pro, or if there’s an alternative approach to roughly detect a human shape in front of the user?