In iOS 26.4 beta, I noticed that when loading pages using WKWebView and using WebSocket to establish IP type addresses, the connection duration was several seconds and sometimes even failed to connect (normally, the connection duration should be in milliseconds). However, when establishing WebSocket connections using domain names, the connections were normal. Additionally, I discovered a special scenario: When directly establishing WebSocket connections using IP type addresses, it remained in the "connect" state. At the same time, based on Wireshark packet capture, it was found that no TCP connection was sent at this time. However, if two connections with the same address were established simultaneously, those two connections could successfully connect. This bug has seriously affected the use of my application service. Is there a chance that this version will solve the problem?

I recently noticed that putting the app on background for some time, then switching back to it again causes the WKWebView to reload the current page, same with just hitting f5 on it. How do we disable this behavior?

Hello, I am experiencing an issue when trying to open the browser on my Apple Watch SE 2 running the latest version, watchOS 11.6. When I attempt to visit any website, the browser opens and displays the URL at the top as if it is loading, but the screen remains black and no content is displayed. The internet connection is available, and all other apps on the watch work normally. This issue occurs only with the browser. I would appreciate any guidance or solution to resolve this problem. Thank you for your assistance.

When using iOS 26.2 (23C55) Safari, the following can occur. The current tab (A) opens a new tab (B) via window.open(url, target, windowFeatures). The user clicks the "back" button to close tab B, and returns to tab A. Tab A attempts to open tab B again at a later point, using the same "target" as before, and fails (no window object is returned by window.open). This bug only occurs when the target is the same as the previously closed tab (which was closed via the back button). If a new target is specified, the new tab opens as expected. This bug is also limited to the back button. If the user manually closes tab B, then it can be re-opened by tab A using window.open using the same target as before.

//Is my post method correct because google and claude are telling me I must use content type for the json and use .setvalue. I thought that my process was correct because I encode the data to turn into json and then make the request func createTask(_ task: Task) async throws -> Task { if let url = URL(string: "(baseURL)/todos"){ var request = URLRequest(url: url) request.httpMethod = "POST" let encoder = JSONEncoder() do{ let data = try encoder.encode(task) request.httpBody = data let (data, response) = try await URLSession.shared.data(for: request) return task //we want to make encoder and then turn the data into json and put it in body } catch{ throw JSONErrors.encodingFailed } } else{ throw URLError(.badURL) } }

Our app encountered a new crash since beta5(23A5308g) released last week,and it seems the crash is not solved yet in beta6(23A5318c).The crash stack below `-[UIView _backing_setPosition:] -[UIView setCenter:] -[_UIEditMenuContentPresentation _displayPreparedMenu:titleView:reason:didDismissMenu:configuration:] ___54-[_UIEditMenuContentPresentation _displayMenu:reason:]_block_invoke -[UIEditMenuInteraction _editMenuPresentation:preparedMenuForDisplay:completion:] -[_UIEditMenuContentPresentation _displayMenu:reason:] -[_UIEditMenuContentPresentation displayMenu:configuration:] ___58-[UIEditMenuInteraction presentEditMenuWithConfiguration:]_block_invoke ___80-[UIEditMenuInteraction _prepareMenuAtLocation:configuration:completionHandler:]_block_invoke ___109-[UITextContextMenuInteraction _editMenuInteraction:menuForConfiguration:suggestedActions:completionHandler:]_block_invoke ___107-[UITextContextMenuInteraction _querySelectionCommandsForConfiguration:suggestedActions:completionHandler:]_block_invoke WTF::CompletionHandler<void (WebKit::DocumentEditingContext&&)>::operator()(WebKit::DocumentEditingContext&&) WTF::Detail::CallableWrapper<IPC::Connection::makeAsyncReplyCompletionHandler<Messages::WebPage::RequestDocumentEditingContext, WTF::CompletionHandler<void (WebKit::DocumentEditingContext&&)> >(WTF::CompletionHandler<void (WebKit::DocumentEditingContext&&)>&&, WTF::ThreadLikeAssertion)::{lambda(IPC::Connection*, IPC::Decoder*)#1}, void, IPC::Connection*, IPC::Decoder*>::call(IPC::Connection*, IPC::Decoder*) WTF::Detail::CallableWrapper<WebKit::AuxiliaryProcessProxy::sendMessage(WTF::UniqueRefIPC::Encoder&&, WTF::OptionSetIPC::SendOption, std::__1::optionalIPC::ConnectionAsyncReplyHandler, WebKit::AuxiliaryProcessProxy::ShouldStartProcessThrottlerActivity)::$_1, void, IPC::Connection*, IPC::Decoder*>::call(IPC::Connection*, IPC::Decoder*) IPC::Connection::dispatchMessage(WTF::UniqueRefIPC::Decoder) IPC::Connection::dispatchIncomingMessages() WTF::RunLoop::performWork() WTF::RunLoop::performWork(void*) _CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION ___CFRunLoopDoSource0 ___CFRunLoopDoSources0 ___CFRunLoopRun __CFRunLoopRunSpecificWithOptions _GSEventRunModal -[UIApplication _run] _UIApplicationMain main main.m start

I develop a tab manager extension: https://apps.apple.com/ua/app/tab-finder-for-safari/id6741719894 It's written purely in Swift. All Safari interactions are done solely inside a SFSafariExtensionHandler . But now i'm considering adding some features from Google Chrome's Extension API like window switching. Is it possible to add a background.js worker to my existing Safari App Extension to have access to the beginRequest method override inside SFSafariExtensionHandler? Without converting my extension from Safari App Extension to Safari Web Extenion?

Since Safari requires a macOS app as a container for Web Extensions, is there a way to establish native messaging directly from SafariWebExtensionHandler using stdin/stdout? Or does Safari enforce a different communication mechanism? I’d like to keep the same approach as other browsers. Any guidance on making this work would be appreciated!

When CHIPS was introduced in 18.4 it worked well, however on 18.5 it does not appear to work. There do not appear to be release notes about this in 18.5, so can someone provide definitive if this is a defect that will be fixed, or have they already been deprecated?

We are seeing an issue in Safari on iOS 26 where the a automatic unfocus of on select box dismisses the second one. <select name="choice1" onblur="console.log('onblur1');" onfocus="console.log('onfocus1');"> <option value="first">First Value</option> <option value="second" selected>Second Value</option> <option value="third">Third Value</option> </select> <select name="choice2" onblur="console.log('onblur2');" onfocus="console.log('onfocus2')"> <option value="first">First Value</option> <option value="second" selected>Second Value</option> <option value="third">Third Value</option> </select> select something in choice1. quickly tap choice2 before onblur1 is logged. At the timing of onblur1 the selection menu for choice2 is dismissed. Anyone know how to fix this behavior?

After App uses Network.framework PrivacyContext Api, dns has been encrypted, that is good. But when using wkwebview to load web page, wireshark captures normal dns request sent by wkwebview. Does wkwebview use DoH to resolve domain? if can, how to config params? If can not, is there anyway to stop wkwebview sending normal dns, such as local proxy.

How can i add Authorization header to a wkwebview. I checked https://developer.apple.com/documentation/foundation/nsurlrequest#1776617 which says Authorization header is a reserved http header and shouldn’t be set. I want to set it when requesting a url in wkwebview for authentication purpose?

"The Referer header allows a server to identify referring pages that people are visiting from or where requested resources are being used. " This header is never forwarded to server when the user is browsing the website in a WebView. This is properly maintained by other browsers but not in-app. How do I include it?

PLATFORM AND VERSION iOS Development environment: Xcode 16.2, macOS 15.3.2 Run-time configuration: iOS 15-18 This happens in iOS, and leads to to the hybrid home page showing users as wrongly unauthenticated, since the at cookie is missing. For context, we have a JWT token that is stored in the Keychain, and on app launch, before any WKWebViews are created, we synchronize this to the WKWebsiteDataStore as an at cookie. We have analytics instrumentation on our websitef to show that WKWebView randomly refuses to send out any cookies. – The following is a snippet from an explanation to the WebKit Slack: We are having an issue on iOS, in which WKWebView loads pages (and even subsequent reloads) without any cookies, even though we have stored cookies in WKWebsiteDataStore.default() before hand right after application launch and becoming a key window. We reference this object, store it as a singleton, (as well as a process pool), and then all webview configurations are initialized with the same data store, the same process pool, every call on the main thread. From reading the source code, it seems that if the internal IPC logic fails, the APIs for deleting and setting data records and cookies fail without any feedback in completion handlers. This bug often happens when returning from the background on iOS after a few hours. Sometimes it happens on cold launches of the app. We have mitigated a similar issue (no cookies being sent) by implementing webViewWebContentProcessDidTerminate and reloading the webview ourselves, we found that whatever webview does to reload if that method is not implemented leads to cookies not being used. There have been multiple reports of WKWebView losing cookies in recent iOS versions, and we have tried to implement all of the workarounds listed. Setting a maximumAge to the cookies we store, and doing a _ = await websiteDataStore.dataRecords(ofTypes: Set([WKWebsiteDataTypeCookies])) before accessing or modifying websiteDataStore.httpCookieStore Question: is it safe to work with WKWebsiteDataStore before a WKWebView is added as a view, if so are there any timing considerations? Are there any logs that we can take a look at, this issue is very hard to reproduce, about 2% of our users face it at scale? Is there anything that could be happening within our process (runloop issues, timing) that could be causing this issue? See multiple reports from other companies that have faced the issue: "Now the Thermonuclear Problem with WKWebViewDataStorage" https://medium.com/axel-springer-tech/synchronization-of-native-and-webview-sessions-with-ios-9fe2199b44c9 STEPS TO REPRODUCE They don't exist, because the issue only happens at scale. We just know that no cookies are sent for a small percentage of requests. We believe this to be an issue in which Webkit fails to communicate internally with whatever IPC mechanisms it has. We have not been able to reproduce this issue consistently. The best we can give is that it happens after a few hours that the app is in the background. This happens regardless of whether the WKWebsiteDataStore is persistent or not, but seems to be much worse when it is persistent. Thus we have disabled persistnet data stores and relied on nonPersistent. The issue is bad enough that we are trying to move away from relying on cookies for iOS and just use request headers which we can only set on the top level request of WKWebView. DTS Case-ID: 13154329

WKWebView has a new property "isBlockedByScreenTime" since iOS 26. But I do not yet understand when exactly this property could be used. When I setup content-based restrictions in the ScreenTime settings then WKWebView reports an error 105 via "webView:didFailProvisionalNavigation:" delegate. The isBlockedByScreenTime property still returns false in this case. If ScreenTime has a time-based limit, the App would not run at all. Under which circumstances would the property "isBlockedByScreenTime" return the value true? When exactly and for what can this property be actually used? The "problem" is that I want to find if a web page is blocked and can not be loaded, why this is the case. By simply trial and error I found out that WKWebView returns error codes 104 and 105 for blocked web sites because of content filters and Screen Time restrictions, however these error codes are not documented at all (at least I've not found any documentation or documentation for these error codes and also some other codes like 100, 102, 204 etc), so I'm not really sure if I handle all cases correctly. I hoped that isBlockedByScreenTime would at least tell me one reason for blocked pages. If there are documents which explain these error codes (100 and above), where I can find these?

I'd like to know the install state of my iOS safari extension in the associated swift app. Is there any way to get this? As we have seen it is available for macOS here, is there anyway to know iOS Safari extension is enabled or not? Thanks

Hello, We’ve been using the CesiumJS WebGL library for several years, both on our website and within embedded WebViews in our iOS application. Since upgrading to iOS versions 18.2 and 18.3, we’ve started receiving numerous user complaints regarding application crashes on various iPad and iPhone models when loading CesiumJS. The crashes occur as soon as the 3D view initializes, and the error consistently reported is: "WebGL context lost" This issue appears to be a WebGL-related crash potentially triggered by GPU memory handling or allocation limits. However, we are not detecting any abnormal memory consumption prior to the crash, and the same setup works perfect on older iOS versions and on all Android devices and versions. Steps to Reproduce: Open: https://www.flightradar24.com/30.47,-94.84/8 Click on any aircraft icon on the map. In the aircraft details panel at the bottom, click on the “3D view” tab. On iOS 18.2 or 18.3, the page will crash shortly after initializing CesiumJS WebGL. Affected Devices: This issue is occurring across a wide range of devices, including: iPad 9th Generation iPad Pro (11-inch, 2nd Gen) iPhone SE (2020 and 2022) iPhone 11, 11 Pro iPhone XR iPhone Mini All of the above are running iOS 18.2 or 18.3. The problem does not occur on Android or previous iOS versions. Request: Has anyone else encountered similar issues with WebGL context loss after upgrading to iOS 18.2 or 18.3? Are there any known changes in memory limits or WebGL behavior in these recent iOS updates? We’d appreciate any insight or suggestions on workarounds or potential fixes. Thank you!

On iOS Devices with ProMotion (120HZ) if you animate Elements on your Page with animation-timeline you get Ghosting Effects. You can not see the Ghosting with a Simulator or on Screenshots, only on real Devices. To Reproduce I made a Minimal Example: https://codesandbox.io/p/sandbox/120hztest-xrwgtc When you scroll quickly on the Page with an iOS 120HZ Device (https://en.wikipedia.org/wiki/List_of_smartphones_with_a_high_refresh_rate_display) you will see ghosting on the Top of the right Element (animation-timeline) and no ghosting on the other animated Element. (I edited the Screenshot, to Illustrate how the Effect looks like, since it is only visible on the real Display)

在 iOS 平台使用 WKWebView 通过file://协议加载本地 HTML 文件时，存储在localStorage中的数据会在 App 后台切换、进程重启后偶尔丢失；但相同代码在安卓 / 鸿蒙平台无此问题。 现在的文档 仅明确了「默认数据存储（defaultDataStore）可将网站数据持久化到磁盘，非持久化存储（nonPersistent）仅存内存」的基础规则； 未提及「file://协议内容即使使用默认持久化存储，也会被归为临时内存存储」这一关键场景限制； 仅在WKURLSchemeHandler关联说明中隐含「自定义 URL 协议可处理 WebKit 原生不支持的 URL 方案」，但未直接关联file://的存储问题。 我找不到如何处理这个问题的官方文档，仅仅有其他的博客说需要增加http/https加载就没有这个问题。 请提供给我官方文档或者官方回复 关于出现这种file:/加载html出现问题的处理办法

Hi, we have PWA for which we´ve built a wrapper using PWA Builder tool and we are experiencing an issue with apple sign in. When we try to redirect the user to "https://appleid.apple.com/auth/authorize?...params...", a bottom sheet login prompt appears and only once the user signs in using the prompt he is then redirected to the url where he needs to sign in again and then we get the callback. We want to get rid of that bottom sheet prompt. The code we´ve tried: ` iosButton.addEventListener('click', function () { window.location.href = "https://appleid.apple.com/auth/authorize?client_id=xxxxx&redirect_uri=xxxxx&response_type=code%20id_token&scope=name%20email&response_mode=form_post"; });` The alternative code we´ve tried for which it seems that nothing happens, we only see the "Started" alert, we´ve confirmed that there is no other error : ` <script src="https://appleid.cdn-apple.com/appleauth/static/jsapi/appleid/1/en_US/appleid.auth.js"></script> <script> (function initAppleSignIn() { try { window.AppleID.auth.init({ clientId: "{{ env('APPLE_WEB_CLIENT_ID') }}", scope: "name email", redirectURI: window.location.origin +"/auth/apple/callback", usePopup: true }); } catch (e) { console.warn('Apple Sign-In init skipped:', e); } })(); function appleButtonClicked() { alert("Started"); try { const res = await window.AppleID.auth.signIn(); } catch (err) { alert("Got error"); } alert("Got here"); } </script>