The Passwords App is accessing websites found in the ASCredentialIdentityStore associated with a 3rd Party password management app (SamuraiSafe). This behaviour appears to be associated with looking up website favicons in order to display in Passwords. However the websites contacted are not stored in the Passwords App/iCloud KeyChain - only the 3rd Party password management app (SamuraiSafe). This is effectively leaking website information stored in the 3rd Party password management app. I first noticed this behaviour on macOS, and it appears to happen every 8 days. Today it was seen on iOS. The behaviour is revealed through the App Privacy Report on iOS (and LittleSnitch on macOS). I would not be surprised to see the Passwords App do this for websites saved in the Passwords App/iCloud KeyChain, however I believe it should not be arbitrarily testing every website found in the ASCredentialIdentityStore as reference to that website url should be entirely under the control of the end user. See attached screenshots from App Privacy Report. Filed bug with Apple: FB16682423

I am trying to setup remote Java debugging between two machines running macOS (15.6 and 26). I am able to get the Java program to listen on a socket. However, I can connect to that socket only from the same machine, not from another machine on my local network. I use nc to test the connection. It reports Connection refused when trying to connect from the other machine. This issue sounds like it could be caused by the Java program lacking Local Network system permission. I am familiar with that issue arising when a program attempts to connect to a port on the local network. In that case, a dialog is displayed and System Settings can be used to grant Local Network permission to the client program. I don't know whether the same permission is required on the program that is receiving client requests. If it is, then I don't know how to grant that permission. There is no dialog, and System Settings does not provide any obvious way to grant permission to a program that I specify. Note that a Java application is a program run by the java command, not a bundled application. The java command contains a hard-wired Info.plist which, annoyingly, requests permission to use the microphone, but not Local Network access.

From watching the video on App Attest the answer would appear to be no, but the video is a few years old so in hope, I thought I would post this question anyway. There's several scenarios where I would like a notification service extension to be able to use App Attest in communications with the back end(for example to send a receipt to the backend acknowledging receipt of the push, fetching an image from a url in the push payload, a few others). Any change App Attest can be used in by a notification service extension?

Dear Apple Developer Support, We are currently encountering a recurring issue with the DeviceCheck API across multiple devices in our production environment. The following error is frequently returned: com.apple.devicecheck.error 0 We would like to ask the following: What are the possible underlying causes that could lead to this specific error code (0) in the DeviceCheck API? Is there any known behavior or condition where Wi-Fi network configurations (e.g., DNS filtering, proxy settings, captive portals) could result in this error? Are there known timeouts, connectivity expectations, or TLS-level requirements that the DeviceCheck API enforces which could fail silently under certain network conditions? Is this error ever triggered locally (e.g., client library-level issues) or is it always from a failed communication with Apple’s servers? Any technical clarification, documentation, or internal insight into this error code would be greatly appreciated. This would help us significantly narrow down root causes and better support our users

Hello. I have issue with implementing "Sign in with Apple" on my website. As folow, I have created: App ID identifier: com.livnobus.app (G2F5N5UHYZ) Service ID identifier: com.livnobus.client (B25ZN8P84U) with option enabled "Sign in with Apple" and configuration (Primary App ID and Webiste URLs) Key ID: 43N8XKUW7S with option enabled "Sign in with Apple" and configuration (Primary App ID and Grouped App Ids) When I click "Sign in with Apple" on my website (https://dev.livnobus.com/auth/login), system redirect me to https://appleid.apple.com/ and error show "invalid_client". Redirect URL on my web site is: https://appleid.apple.com/auth/authorize?client_id=com.livnobus.client&redirect_uri=https%3A%2F%2Fdev.livnobus.com%2Fauth%2Fapple%2Fcallback&scope=name%20email&response_type=code&response_mode=form_post&state=eGAgdpLrvskJc26RbTizc9TGwxnL6KAEJOf68pmO&nonce=e7c7a242-1977-47ea-9013-98820c24bfba.eGAgdpLrvskJc26RbTizc9TGwxnL6KAEJOf68pmO There was old Service ID identifier com.livnobus.app-client, for which I lost private KEY, so I have created new one: com.livnobus.client With old Service ID com.livnobus.app-client, https://appleid.apple.com/ shows me Apple form for sign in, but with new Service ID com.livnobus.client there is error "invalid_client" https://appleid.apple.com/auth/authorize?client_id=com.livnobus.app-client&redirect_uri=https%3A%2F%2Fdev.livnobus.com%2Fauth%2Fapple%2Fcallback&scope=name%20email&response_type=code&response_mode=form_post&state=eGAgdpLrvskJc26RbTizc9TGwxnL6KAEJOf68pmO&nonce=e7c7a242-1977-47ea-9013-98820c24bfba.eGAgdpLrvskJc26RbTizc9TGwxnL6KAEJOf68pmO These changes I have made last Friday, and since then I can't use "Sign in with Apple" on my website. Thanks!

I am having trouble with one of my apps that will not let me log in via Apple Sign In. I am using Firebase and Firebase UI for the sign in process. I have many other apps with the same exact config that currently work just fine, but this one I have gone as far as completely deleting the targets and rebuilding and it will not return from the login screen I checked the following: Sign in with Apple ID Capability is available in XCode and on the dev certificate on developer.apple.com I have also toggled both of them on and off. I have double checked the config in Firebase to turn on the Apple Login identifier. Again I have toggle it on and off. I have cleaned the project multiple times to no avail. I have logged out and back into my developer account in XCode. It seams like after I put in the correct password to log in, it just never returns to the app, there is no logging. I do get a notified(shaking input box) if I put in an incorrect password, but when I put in the correct one, the login window never dismisses and my app is not notified. I checked the Console and the last message from akd on a working app is: Notifying client (bundle) of credential state change 1. Remote view sent a finish event On the one not working, using the same user and password akd returns: SRP authentication with server failed! Error: Error Domain=com.apple.AppleIDAuthSupport Code=2 "M2 missing (bad password) I have 100% verified I am putting in the correct user password. I was only notified of this issue because Policy is having the same issue logging in during App Review. Also, if I put in a bad password the input window shakes and when this is happening, the input window is not shaking

Hello, we're currently evaluating the side effects of transferring our app to a different Apple developer account. Our users use SIWA to sign in to our platform which uses Auth0. As I understand it, the identifiers provided by Apple will change, and as such Auth0 will not recognise them and treat them as new users. I've read conflicting documentation, reports, discussions, etc, so it would be great if I could get some clarification on the topic. Furthermore we're concerned about the Hide My Email functionality. A lot of our users use this feature. Will the relay email for each user change with the transfer? If so, does the 'old' relay email stop working as soon as the transfer happens? Thanks in advance!

Hello everyone, In my application, i have implemented authentication using ASWebauthenticationSession. However, when redirecting the user to a WKWebView, no cookies are shared, causing the session to be lost and requiring the user to log in again. Is there a way to share cookies between the two? If not, what would be the best approach to set up authentication that ensures SSO when switching to a WebView ? Thank you very much for your help !

To use passkeys, you need to place the correct AASA file on the web server and add an entry in the Entitlements.plist, for example webcredentials:mydomain.com. This is clear so far, but I would like to ask if it's possible to set this webcredentials in a different way in the app? The reason for this is that we are developing a native app and our on-premise customers have their own web servers. We cannot know these domains in advance so creating a dedicated app for each customer is not option for us. Thank you for your help!

Since release of 18.4. prepareInterfaceToProvideCredential .oneTimeCode case is not called and instead prepareInterfaceForUserChoosingTextToInsert() is called. That is the wrong delegate for this case and it causes confusion for the users. Also, some TOTP fields are recognised however, the key icon button is not presented above the keyboard next to TOTP suggestions. I've also tested 18.5 and it has the same issue. provideOneTimeCodeWithoutUserInteraction works just fine.

Hey all, Question for the masses.... Does the Yubikey authentication have a OS dependency and it only works with a stable, public OS? Does Azure/Okta/Yubikey beta OS26? My CEO installed iPadOS 26 on his iPad and was not able to authenticate via Yubikey into our company environment. I ran the same scenario on my iPad using iPadOS 26 and I had the same results. Downgrading to iPAdOS doesn't pose these issues. I'm assuming something isn't fine-tuned yet?

Hello, I am using the prf extension for passkeys that is available since ios 18 and macos15. I am using a fixed, hardcoded prf input when creating or geting the credentials. After creating a passkey, i try to get the credentials and retrieve the prf output, which works great, but i am getting different prf outputs for the same credential and same prf input used in the following scenarios: Logging in directly (platform authenticator) on my macbook/iphone/ipad i get "prf output X" consistently for the 3 devices When i use my iphone/ipad to scan the qr code on my macbook (cross-platform authenticator) i get "prf output Y" consistently with both my ipad and iphone. Is this intended? Is there a way to get deterministic prf output for both platform and cross-platform auth attachements while using the same credential and prf input?

I have filed bug reports on this to no avail, so I am bringing it up here hoping someone at Apple will address this. Since the first beta of 26.3, with voice control enabled there are now two icons in the menu bar (*plus an orange dot in full screen) that never go away. That orange microphone isn't serving its intended purpose to notify me that something is accessing my microphone if it is always displayed. I use voice control extensively, so it is nearly always on. In every prior version of macOS, the orange icon was not on for voice control. Even if voice control is not listening but simply enabled in system settings, the orange icon will be there. And there is no need for this icon to be on for a system service that is always listening. This orange icon in the menu bar at all times is incredibly irritating, as it takes up valuable space to the right of the notch, and causes other actual useful menu bar items to be hidden. As well, if some other application on my system were to turn on the mic and start recording me I would never know since that orange icon is always on. It also places an orange dot next to the control center icon taking up even more of the precious little menu bar real estate. Please fix this! Either exempt voice control (as Siri is always listening and it doesn't get the orange icon) or exempt all system services, or give me a way to turn this off. If you cannot tell, I find this incredibly annoying and frustrating.

I'm developing a passkey manager using ASCredentialProviderViewController. I've set a custom AAGUID in the attestation object during registration: let aaguid = Data([ 0xec, 0x78, 0xfa, 0xe8, 0xb2, 0xe0, 0x56, 0x97, 0x8e, 0x94, 0x7c, 0x77, 0x28, 0xc3, 0x95, 0x00 ]) However, when I test on webauthn.io, the relying party receives: AAGUID: 00000000-0000-0000-0000-000000000000 Provider Name: "iCloud Keychain" It appears that macOS overwrites the AAGUID to all zeros for third-party Credential Provider Extensions. This makes it impossible for relying parties to distinguish between different passkey providers, which is one of the key purposes of AAGUID in the WebAuthn specification. Is this expected behavior? Is there a way for third-party Credential Provider Extensions to use their own registered AAGUID? Environment: macOS 26.2 Xcode 26.2

Recently, we received an user enquiry regarding the inability to perform bookings for the app. After investigation, we found that the issue appears to be caused by the failure of the Apple DeviceCheck service. Based on our checks, approximately 0.01% of requests fail each day (e.g., on 26 June: 6 failures out of 44,544 requests) when using Apple DeviceCheck. Could you please assist in raising the following enquiries with Apple Support? What is the typical failure rate of Apple DeviceCheck? Are there any reliability metrics or benchmarks for its performance? How can the failures be prevented, or is there a recommended retry mechanism to handle such failures? Does the iOS version affect the performance or reliability of Apple DeviceCheck? Are there known issues or limitations with specific iOS versions? How long does the token remain valid, and when should a new one be retrieved? Does using a jailbroken device affect the functionality of Apple DeviceCheck?

We use Jamf Blueprint to deploy the managed app and identity to the iOS device (iOS 26.3 installed). Our managed app can access the identity via let identityProvider = ManagedAppIdentitiesProvider() let identity: SecIdentity do { identity = try await identityProvider.identity(withIdentifier: "myIdentity") } catch { } However, the app extension cannot access the same identity. Our app extension is notification extension that implemented UNNotificationServiceExtension APIs. We use above code in didReceive() function to access identity that always failed. The MDM configuration payload is: "AppConfig": { "Identities": [ { "Identifier": "myIdentity", "AssetReference": "$PAYLOAD_2" } ] }, "ExtensionConfigs": { "Identifier (com.example.myapp.extension)": { "Identities": [ { "Identifier": "myIdentity", "AssetReference": "$PAYLOAD_2" } ] } }, "ManifestURL": "https://example.net/manifest.plist", "InstallBehavior": { "Install": "Required" } } Is there any problem in our MDM configuration? Or the notification extension cannot integrate with ManagedApp FM?

In these threads, it was clarified that Credential Provider Extensions must set both Backup Eligible (BE) and Backup State (BS) flags to 1 in authenticator data: https://developer.apple.com/forums/thread/745605 https://developer.apple.com/forums/thread/787629 However, I'm developing a passkey manager that intentionally stores credentials only on the local device. My implementation uses: kSecAttrAccessibleWhenUnlockedThisDeviceOnly for keychain items kSecAttrTokenIDSecureEnclave for private keys No iCloud sync or backup These credentials are, by definition, single-device credentials. According to the WebAuthn specification, they should be represented with BE=0, BS=0. Currently, I'm forced to set BE=1, BS=1 to make the extension work, which misrepresents the actual backup status to relying parties. This is problematic because: Servers using BE/BS flags for security policies will incorrectly classify these as synced passkeys Users who specifically want device-bound credentials for higher security cannot get accurate flag representation Request: Please allow Credential Provider Extensions to return credentials with BE=0, BS=0 for legitimate device-bound passkey implementations. Environment: macOS 26.2 (25C56), Xcode 26.2 (17C52)

Hi, I'm using webauthn.io to test my macOS Passkey application. When registering a passkey whichever value I set for User Verification, that's what I get when I check registrationRequest.userVerificationPreference on prepareInterface(forPasskeyRegistration registrationRequest: any ASCredentialRequest). However, when authenticating my passkey I can never get discouraged UV on prepareInterfaceToProvideCredential(for credentialRequest: any ASCredentialRequest). In the WWDC 2022 Meet Passkeys video, it is stated that Apple will always require UV when biometrics are available. I use a Macbook Pro with TouchID, but if I'm working with my lid closed, shouldn't I be able to get .discouraged?

On iOS 26, QuickLookAR (ARQuickLookPreviewItem) shares the actual .usdz file via the system Share Sheet instead of the original website URL. This is a regression from iOS 17–18, where sharing correctly preserved and sent only the source URL. Repro steps: 1. Open a web-hosted USDZ model in QuickLookAR (Safari). 2. Tap Share. 3. Share via any messenger. 4. The full .usdz file is sent. Expected: Share Sheet sends only the original URL. Actual: Share Sheet sends the USDZ file. Impact: Uncontrolled distribution of proprietary 3D assets. Critical IP / data leak. Blocks production AR deployments relying on QuickLook. Environment: iOS 26.0–26.1, iPhone 14 / 15. Works as expected on iOS 17–18. Test case: https://admixreality.com/ios26/

After registe Passkey with webauthn library, i create a passkeyRegistration with follow, let passkeyRegistration = ASPasskeyRegistrationCredential(relyingParty: serviceIdentifier, clientDataHash: clientDataHashSign, credentialID: credentialId, attestationObject: attestationObject) and then completeRegistrationRequest like that, extensionContext.completeRegistrationRequest(using: passkeyRegistration) But a bad outcome occurred from user agent. NotAllowedError:The request is not allowed by the user agent or the platform in the current context. And the return data rawID & credentialPublicKey is empty,