I'm experiencing an issue with Sign In with Apple integration in my React Native Expo app (Bundle ID: com.anonymous.TuZjemyApp). Problem Description: When users attempt to sign in using Sign In with Apple, they successfully complete Face ID/password authentication, but then receive a "Sign-Up not completed" error message. The authentication flow appears to stop at this point and doesn't return the identity token to my app. Technical Details: Frontend Implementation: Using expo-apple-authentication. Requesting scopes: FULL_NAME and EMAIL App is properly configured in app.json with: usesAppleSignIn: true Entitlement: com.apple.developer.applesignin Backend Implementation: Endpoint: POST /api/auth/apple Using apple-signin-auth package for token verification Verifying tokens with audience: com.anonymous.TuZjemyApp Backend creates/updates user accounts based on Apple ID Question: I'm not sure why the authentication flow stops with "Sign-Up not completed" after successful Face ID verification. The identity token never reaches my app. Could you please help me understand: What might cause this specific error message? Are there any additional Apple Developer Portal configurations required? Could this be related to app capabilities or entitlements? Is there a specific setup needed for the app to properly receive identity tokens? I set up provisioning profiles, and added Sign in with Apple as a capability and still it doesn't work.

Hello, I’m experiencing an issue with email deliverability when sending messages through Apple’s private email relay service. Our app uses “Sign in with Apple” and sends communication emails to users through relay addresses . Messages are successfully delivered but are consistently being placed in users’ spam or junk folders. Configuration summary: Domain: myapp.example Mail server: OVH SMTP SPF and DKIM: Active and validated Domain and sender registered under “Sign in with Apple for Email Communication” Messages pass SPF and DKIM checks successfully, but emails relayed by Apple’s private service are still being marked as spam. Could anyone confirm if there are additional steps or configurations required to improve deliverability (e.g., DMARC alignment or specific header requirements)? Thank you for your help!

Hello everyone! We are from Russia, and we no longer have an official Apple store. All phones are imported through parallel imports. Yesterday, my wife logged out of her Apple ID and logged in to someone else's account, and as a result, her phone was in lost and locked mode. We have a sales receipt confirming the purchase, but it is from a Russian store. Can you please tell me if there is a way to unlock the phone or if it is already a brick? Scammers are asking for money to unlock the phone. Thank you in advance for your reply!

If a user triggers account revoke on their Apple ID—but does not perform an in-app account deletion—will Apple send a server-to-server notification to inform us of this revoke event? Additionally, in this scenario, if the user later wants to restore access to their existing game account data (for example, by re-binding Sign in with Apple or switching to another login method), are developers expected to restore all previously linked game data, or should the revoke event be treated as a permanent loss of authorization?

Goal I want to reply to feedback from customers who signed up using a private.relay account. Problem I am getting this error when sending an email: Reporting-MTA: dns; mailfout.stl.internal X-Postfix-Queue-ID: B87481D0015B X-Postfix-Sender: rfc822; hello@mydomain.com Arrival-Date: Fri, 7 Nov 2025 03:37:29 -0500 (EST) Final-Recipient: rfc822; xxxx@privaterelay.appleid.com Original-Recipient: rfc822;xxxx@privaterelay.appleid.com Action: failed Status: 5.1.1 Remote-MTA: dns; smtp3.privaterelay.appleid.com Diagnostic-Code: smtp; 550 5.1.1 <hello@mydomain.com>: unauthorized sender What have I done? I have configured mydomain.com in the Email Configuration Service inside of apple, as well as the email hello@mydomain.com. Using https://www.mail-tester.com/, I could confirm that the - [SPF] Your server 202.12.124.158 is authorized to use hello@mydomain.com - Your DKIM signature is valid - Your message passed the DMARC test My hunch This app was transferred and the previous owner did not have the email configuration set up. The emails I am writing messages to signed up at that time. Questions: If I rescue the old account and set up the email configuration, would it work? Is there any other tip I could try to apply?

Hello I am trying to release an application using EXPO ROUTER + EXPO RN WEB. I am trying to implement Apple Login using Firebase. I have already put necessary info in both App Store Connect and Firebas console. Now I am so confused what I have to do next. What are some resource I could use or tips you could possibly give me when making apple login available using firebase. Pleas all helps are welcomed and needed

I’m using Sign in with Apple in my iOS app. When a user chooses “Hide My Email”, I receive the @privaterelay.appleid.com relay address. For marketing reasons, I would prefer to have the user’s real email address instead of the relay email. I want to stay compliant with App Store Review and the Sign in with Apple design/UX requirements. My questions are: Is it allowed to force the user (as part of the registration process) to provide their real email address, even if they chose “Hide My Email” during Sign in with Apple? Are there any specific App Store Review guidelines that forbid: Blocking sign up or access to features if the user keeps the relay email, or Showing a strong prompt like “We can’t log you in unless you share your real email”? What is the recommended, compliant pattern for collecting a “real” email when using Sign in with Apple + Private Relay? I’d appreciate any official clarification or examples of what App Review considers acceptable vs. reject-worthy here.

Hello, I am implementing "Sign in with Apple" on my backend and validating the Identity Token (JWT) received from the client. I noticed that for some users who choose the "Hide My Email" option, the is_private_email claim is missing from the ID Token payload, even though the email address clearly belongs to the private relay domain (@privaterelay.appleid.com). Here is an example of the decoded payload I received: { "iss": "https://appleid.apple.com", "aud": "xxx", "exp": 1764402438, "iat": 1764316038, "sub": "xxxxxxxx", "c_hash": "3FAJNf4TILzUgo_YFe4E0Q", "email": "xxx@privaterelay.appleid.com", "email_verified": true, "auth_time": 1764316038, "nonce_supported": true // "is_private_email": true <-- This field is missing } My Questions: Is the is_private_email claim considered optional in the ID Token? Is it safe and recommended to rely solely on the email domain suffix (@privaterelay.appleid.com) to identify if a user is using a private email? Any insights or official references would be appreciated. Thanks.

Hello, I am implementing "Sign in with Apple" on my backend and validating the Identity Token (JWT) received from the client. I noticed that for some users who choose the "Hide My Email" option, the is_private_email claim is missing from the ID Token payload, even though the email address clearly belongs to the private relay domain (@privaterelay.appleid.com). Here is an example of the decoded payload I received: { "iss": "https://appleid.apple.com", "aud": "com.platform.elderberry.new.signinwithapple", "exp": 1764402438, "iat": 1764316038, "sub": "000851.86193ef81ad247feb673746c19424f28.0747", "c_hash": "3FAJNf4TILzUgo_YFe4E0Q", "email": "x8sqp2dgvv@privaterelay.appleid.com", "email_verified": true, "auth_time": 1764316038, "nonce_supported": true // "is_private_email": true <-- This field is missing } My Questions: Is the is_private_email claim considered optional in the ID Token? Is it safe and recommended to rely solely on the email domain suffix (@privaterelay.appleid.com) to identify if a user is using a private email? Any insights or official references would be appreciated. Thanks.

https://developer.apple.com/news/?id=j9zukcr6 starting from Jan 2026 there is change in requirements for account notifications for Sign in with Apple. Does this apply only to developers based in South Korea or all apps which are avai via the korean App Store?

I want to add the "Sign In with Apple" feature to my iPadOS application. I've already done the following: Include com.apple.developer.applesignin in mobileprovision Include com.apple.developer.applesignin in entitlements However, I'm getting the following errors: `Authorization failed: Error Domain=AKAuthenticationError Code=-7026 "(null)" UserInfo={AKClientBundleID=xxxx} LaunchServices: store (null) or url (null) was nil: Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={_LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler, _LSFile=LSDReadService.mm, NSDebugDescription=process may not map database} Attempt to map database failed: permission was denied. This attempt will not be retried. Failed to initialize client context with error Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={_LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler, _LSFile=LSDReadService.mm, NSDebugDescription=process may not map database} Failed to get application extension record: Error Domain=NSOSStatusErrorDomain Code=-54 "(null)" ASAuthorizationController credential request failed with error: Error Domain=com.apple.AuthenticationServices.AuthorizationError Code=1000 "(null)" ` What is this problem? How can I solve it? Hoping someone can help, thank you!

Hello. When a user revokes Apple Login authorization, I am expecting a webhook to be delivered to our configured endpoint, but I currently not receiving any at all. So I have some questions: Should the revoke event webhook be delivered in real-time? If it is not real-time, when is the webhook supposed to be sent? If my server fails to respond to the webhook request, does Apple retry the delivery? (Actually I couldn't find how to response in this scenario, but if I can) Thanks in advance.

Hi I am experiencing a persistent 'invalid_client' error when attempting to exchange the authorization code for an access token using Sign in with Apple for my website (https://www.vitamarinaweb.com). Current Setup & Steps Taken: Identifier: I am using the Service ID com.vitamarinaweb.web1, which is correctly linked to the Primary App ID com.vitamarinaweb.web. Client Secret: I have generated a fresh Client Secret (JWT) using a valid Key (.p8) and confirmed the Team ID (29J763Q88J) and Key ID (RRW6536D27) are correct. Redirect URIs: My Return URL is set to https://www.vitamarinaweb.com/login.php and I have verified there are no trailing spaces or mismatches. Manual Test (CURL): When I perform a manual POST request via CURL using the generated Client Secret, I receive an 'invalid_grant' response (meaning the Client Secret and Client ID are accepted, and only the temporary code is rejected as expected). The Issue: Despite the CURL success, every request initiated through the web browser/PHP application returns {"error":"invalid_client"}. Verification Requested: Could you please verify if there is a synchronization delay or a specific block on Service ID com.vitamarinaweb.web1? Is there any internal mismatch between the Key ID RRW6536D27 and its association with the newly created Service ID? I have already cleared browser caches and tried multiple devices (different IP addresses) with the same result. Thank you for your assistance."

Hello I have a problem with provisionprofile file. I have created Identifier with Sign in with Apple capability turned on, created Profile with Developer ID selected and now I try to export archive with generated Developer ID provision file but it says "Profile doesn't support Sign in with Apple" Also interesting thing that default provisions like macOS App Development Mac App Store Connect don't show such error when I try to export archive Maybe this problem is only related to Developer ID provision and Direct Distribution doesn't support Sign in with Apple, but I havent found proves about this idea

I’ve been running into an issue for over a day when trying to create a Sign in with Apple key. Each time I attempt to download it, I’m redirected to a page that displays an error and provides no further guidance. I’ve contacted Support and haven’t yet received a reply. I’ve also tried across multiple browsers (Chrome, Safari, Firefox), including incognito modes. Any ideas on how to resolve this? We’re currently stuck and would appreciate guidance.

Hello, We are working on integrating app integrity verification into our service application, following Apple's App Attest and DeviceCheck guide. Our server issues a challenge to the client, which then sends the challenge, attestation, and keyId in CBOR format to Apple's App Attest server for verification. However, we are unable to reach both https://attest.apple.com and https://attest.development.apple.com due to network issues. These attempts have been made from both our internal corporate network and mobile hotspot environments. Despite adjusting DNS settings and other configurations, the issue persists. Are there alternative methods or solutions to address this problem? Any recommended network configurations or guidelines to successfully connect to Apple's App Attest servers would be greatly appreciated. Thank you.

Question detail Dear Apple Developer Technical Support, We are currently following the official Apple documentation “TN3159: Migrating Sign in with Apple users for an app transfer” to carry out a Sign in with Apple user migration after successfully transferring several apps to a new developer account. Here is a summary of our situation: Under the original Apple developer account, we had five apps using Sign in with Apple, grouped under a shared primary app using App Grouping. Recently, we transferred three of these apps to our new Apple developer account via App Store Connect. After the transfer, these three apps are no longer associated with the original primary App ID. We reconfigured individual Services IDs for each app in the new account and enabled Sign in with Apple for each. More than 24 hours have passed since the app transfer was completed. Now we are attempting to follow the migration process to restore user access via the user.migration flow. Specifically, we are using the following script to request an Apple access token: url = "https://appleid.apple.com/auth/token" headers = {"Content-Type": "application/x-www-form-urlencoded"} data = { "grant_type": "client_credentials", "scope": "user.migration", "client_id": "com.game.friends.ios.xxxx", # New Primary ID in the new account "client_secret": "<JWT signed with new p8 key>" } response = requests.post(url, headers=headers, data=data) However, the API response consistently returns: { "error": "invalid_client" } We have verified that the following configurations are correct: The client_secret is generated using the p8 key from the new account, signed with ES256 and correct key_id, team_id, and client_id. The client_id corresponds to the Services ID created in the new account and properly associated with the migrated app. The scope is set to user.migration. The JWT payload contains correct iss, sub, and aud values as per Apple documentation. The app has been fully transferred and reconfigured more than 24 hours ago. Problem Summary & Request for Support: According to Apple’s official documentation: “After an app is transferred, Apple updates the Sign in with Apple configuration in the background. This can take up to 24 hours. During this time, attempts to authenticate users or validate tokens may fail.” However, we are still consistently receiving invalid_client errors after the 24-hour waiting period. We suspect one of the following issues: The transferred apps may still be partially associated with the original App Grouping or primary App ID. Some Sign in with Apple configuration in Apple’s backend may not have been fully updated after the transfer. Or the Services ID is not yet fully operational for the transferred apps in the new account. We kindly request your assistance to: Verify whether the transferred apps have been completely detached from the original App Grouping and primary App ID. Confirm whether the new Services IDs under the new account are fully functional and eligible for Sign in with Apple with user.migration scope. Help identify any remaining configuration or migration issues that may cause the invalid_client error. If necessary, assist in manually ungrouping or clearing any residual App Grouping relationships affecting the new environment. We have also generated and retained the original transfer_sub identifiers and are fully prepared to complete the sub mapping once the user.migration flow becomes functional. Thank you very much for your time and support!

Apple Sign In - "Sign up not completed" Error in Development Build (React Native / Expo) Problem Summary I'm implementing Apple Sign In in a React Native app using expo-apple-authentication. The Apple sign-in dialog appears as expected, but after tapping "Continue," it displays the message: "Sign up not completed". No credential is returned, and the promise eventually rejects with ERR_REQUEST_CANCELED. App Configuration Platform: React Native (Expo SDK 52) Library: expo-apple-authentication v7.1.3 Target: iOS development build (not Expo Go) Bundle ID: com.example.appname.nativetest (new App ID created for testing) Apple Developer Console Setup (Reviewed Carefully) App ID Explicit App ID (not a wildcard) "Sign In with Apple" capability enabled No associated Services IDs or Sign In with Apple Keys Provisioning Profile Development profile created for the test App ID Profile includes the test device and development certificate Installed successfully and used to sign the app Certificates and Signing Valid Apple Developer Program membership Development certificate installed and selected during build App installs and launches properly on the test device Implementation Attempts Attempt 1: Supabase OAuth Method Initially tried using Supabase’s built-in Apple OAuth provider: Configured with team ID, key ID, and JWT credentials Proper redirect URLs and scheme were in place Resulted in OAuth URL pointing to Supabase instead of Apple, with incomplete client ID Ultimately moved to native implementation for improved control and reliability Attempt 2: Native Apple Sign In (Current Approach) Using expo-apple-authentication with the following code: const credential = await AppleAuthentication.signInAsync({ requestedScopes: [ AppleAuthentication.AppleAuthenticationScope.FULL_NAME, AppleAuthentication.AppleAuthenticationScope.EMAIL, ], }); Relevant app.config.js Section: ios: { bundleIdentifier: 'com.example.appname.nativetest', usesAppleSignIn: true, infoPlist: { NSAppTransportSecurity: { NSAllowsArbitraryLoads: true, NSAllowsLocalNetworking: true, }, }, }, plugins: ['expo-apple-authentication'] Observed Behavior AppleAuthentication.isAvailableAsync() → true Credential state → NOT_FOUND (expected for new user) Apple Sign In dialog appears and allows interaction User taps "Continue" → dialog reports "Sign up not completed" Eventually returns: [Error: The user canceled the authorization attempt], code ERR_REQUEST_CANCELED Confirmed Working Aspects AppleAuthentication API is available and initialized App is signed correctly and launches on the physical test device Apple Sign In dialog appears with correct styling and options Same result observed across both Wi-Fi and cellular networks Clean Setup and Debugging Performed Removed all previous build artifacts Created a new App ID and new provisioning profile Rebuilt the app using expo run:ios --device Validated entitlements and provisioning assignments Removed any Services IDs and Apple Sign In keys used in previous attempts Verified ATS (App Transport Security) policies allow dev-time communication Environment Information Device: iPhone (not simulator) iOS Version: 18.5 Xcode: Latest version Apple ID: Developer account with 2FA enabled Build Method: EAS CLI using expo run:ios --device Open Questions Has anyone experienced the "Sign up not completed" issue with a clean native implementation in Expo? Are there known limitations when testing Apple Sign In in local development builds? Could prior Apple ID authorization attempts impact sign-in behavior during testing? Are there any additional configuration steps, Info.plist changes, or entitlements required beyond those listed above? Thank you in advance for any suggestions or guidance. We’re hoping this is simply a configuration detail that needs to be adjusted.

Our app uses Sign in with Apple. In recent weeks (or months), we've noticed that emails sent to @privaterelay.appleid.com addresses are not being delivered. We're not receiving any bouncebacks or error messages from the mail server, but the emails never reach the user's mailbox. We've also checked spam folders, with no luck. We have verified that our Email Sources are configured correctly in Apple Developer settings. Is there any way to debug or trace what might be happening with these messages? Thanks in advance!

I keep getting invalid_client, here is a test login: https://www.bella-booking.ch/_get_incl/test_apple_login.cfm Any help appreciated. NOTE: Everey other error, like wrong reroute or wrong client id, a different error will be sent frpm apple, after I checked all and crosschecked with jwt.io, it keep getting invalid_client. Any clue? If the response is correct, the token should be displayed on the page. Thx