My current app implements a custom video player, based on a AVSampleBufferRenderSynchronizer synchronising two renderers: an AVSampleBufferDisplayLayer receiving decoded CVPixelBuffer-based video CMSampleBuffers, and an AVSampleBufferAudioRenderer receiving decoded lpcm-based audio CMSampleBuffers. The AVSampleBufferRenderSynchronizer is started when the first image (in presentation order) is decoded and enqueued, using avSynchronizer.setRate(_ rate: Float, time: CMTime), with rate = 1 and time the presentation timestamp of the first decoded image. Presentation timestamps of video and audio sample buffers are consistent, and on most streams, the audio and video are correctly synchronized. However on some network streams, on iOS, the audio and video aren't synchronized, with a time difference that seems to increase with time. On the other hand, with the same player code and network streams on macOS, the synchronization always works fine. This reminds me of something I've read, about cases where an AVSampleBufferRenderSynchronizer could not synchronize audio and video, causing them to run with independent and potentially drifting clocks, but I cannot find it again. So, any help / hints on this sync problem will be greatly appreciated! :)

The app registers a periodic time observer to the AVPlayer when the playback starts and it works fine. When switching to AirPlay during playback, the periodic time observation continues working as expected. However, when switching back to local playback, the periodic time observer does not fire anymore until a seek is performed. The app removes the periodic time observer only when the playback stops. I can see that when switching back to local playback, the timeControlStatus successively changes to .waitingToPlayAtSpecifiedRate (reason: .evaluatingBufferingRate) then to .waitingToPlayAtSpecifiedRate (reason: .toMinimizeStalls) and finally to .playing But the time observation does not work anymore. Also, the issue is systematic with Live and VOD streams providing a program date (with HLS property #EXT-X-PROGRAM-DATE-TIME), with or without any DRM, and is never reproduced with other VOD streams.

Hi everyone, I’m working on an iOS MusicKit app that overlays a metronome on top of Apple Music playback. To line the clicks up perfectly I’d like access to low-level audio analysis data—ideally a waveform / spectrogram or beat grid—while the track is playing. I’ve noticed that several approved DJ apps (e.g. djay, Serato, rekordbox) can already: • Display detailed scrolling waveforms of Apple Music songs • Scratch, loop or time-stretch those tracks in real time That implies they receive decoded PCM frames or at least high-resolution analysis data from Apple Music under a special entitlement. My questions: 1. Does MusicKit (or any public framework) expose real-time audio buffers, FFT bins, or beat markers for streaming Apple Music content? 2. If not, is there an Apple program or entitlement that developers can apply for—similar to the “DJ with Apple Music” initiative—to gain that deeper access? 3. Where can I find official documentation or a point of contact for this kind of request? I’ve searched the docs and forums but only see standard MusicKit playback APIs, which don’t appear to expose raw audio for DRM-protected songs. Any guidance, links or insider tips on the proper application process would be hugely appreciated! Thanks in advance.

I have some tried-and-tested code that records and plays back audio via AUHAL which breaks on Tahoe on Intel. The same code works fine on Sequioa and also works on Tahoe on Apple Silicon. To start with something simple, the following code to request access to the Microphone doesn't work as it should: bool RequestMicrophoneAccess () { __block AVAuthorizationStatus status = [AVCaptureDevice authorizationStatusForMediaType: AVMediaTypeAudio]; if (status == AVAuthorizationStatusAuthorized) return true; __block bool done = false; [AVCaptureDevice requestAccessForMediaType: AVMediaTypeAudio completionHandler: ^ (BOOL granted) { status = (granted) ? AVAuthorizationStatusAuthorized : AVAuthorizationStatusDenied; done = true; }]; while (!done) CFRunLoopRunInMode (kCFRunLoopDefaultMode, 2.0, true); return status == AVAuthorizationStatusAuthorized; } On Tahoe on Intel, the code runs to completion but granted is always returned as NO. Tellingly, the popup to ask the user to grant microphone access is never displayed, even though the app is not present in the Privacy pane and never appears there. On Apple Silicon, everything works fine. There are some other problems, but I'm hoping they have a common underlying cause and that the Apple guys can figure out what's wrong from the information in this post. I'd be happy to test any potential fix. Thanks.

Hi, I am getting into a trap. Please check stack-trace, howto fix this? regards, Joël stack-trace with ExtAudioFileWrite

FxPlug is one of Apple’s official SDKs, recently updated to version 4.3.2. In theory the SDK should guarantee third-parties can build plug-ins that are backward compatible with older versions of Final Cut Pro, Motion and Compressor. FxPlug SDK includes two frameworks that third-party developers like me end up bundling inside our third-party plugins: FxPlug.framework and PlugInManager.framework. Behind the scenes, the SDK relies on PlugInKit, but the FxPlug.framework provides abstractions so that third-parties don't have to handle the intricacies of XPC directly. The most recent version of FxPlug.framework included with the SDK was possibly built with an error: the Info.plist shows a LSMinimumSystemVersion entry of 14.6, suggesting the binary may have been compiled and linked with MACOSX_DEPLOYMENT_TARGET set to 14.6 by accident. The problem: when older versions of Final Cut Pro or Motion load a third-party plugin (itself built with the appropriate deployment target, macOS 11 or 12, for example) on pre-macOS 14.6, the dynamic linker immediately loads Apple’s own FxPlug.framework, but this causes the process to crash immediately: Thread 0 Crashed:: Dispatch queue: com.apple.main-thread 0 libobjc.A.dylib 0x7ff81e065955 map_images_nolock + 5399 1 libobjc.A.dylib 0x7ff81e0643d6 map_images + 67 2 dyld 0x10bd551fb invocation function for block in dyld4::RuntimeState::setObjCNotifiers(void (*)(unsigned int, char const* const*, mach_header const* const*), void (*)(char const*, mach_header const*), void (*)(char const*, mach_header const*)) + 275 3 dyld 0x10bd506c9 dyld4::RuntimeState::withLoadersReadLock(void () block_pointer) + 41 4 dyld 0x10bd550e2 dyld4::RuntimeState::setObjCNotifiers(void (*)(unsigned int, char const* const*, mach_header const* const*), void (*)(char const*, mach_header const*), void (*)(char const*, mach_header const*)) + 82 5 dyld 0x10bd68d45 dyld4::APIs::_dyld_objc_notify_register(void (*)(unsigned int, char const* const*, mach_header const* const*), void (*)(char const*, mach_header const*), void (*)(char const*, mach_header const*)) + 79 6 libobjc.A.dylib 0x7ff81e064244 _objc_init + 1279 7 libdispatch.dylib 0x7ff81e01d993 _os_object_init + 13 8 libdispatch.dylib 0x7ff81e02b1b8 libdispatch_init + 311 9 libSystem.B.dylib 0x7ff828fd585f libSystem_initializer + 238 10 dyld 0x10bd5ae4f invocation function for block in dyld4::Loader::findAndRunAllInitializers(dyld4::RuntimeState&) const + 182 11 dyld 0x10bd81aad invocation function for block in dyld3::MachOAnalyzer::forEachInitializer(Diagnostics&, dyld3::MachOAnalyzer::VMAddrConverter const&, void (unsigned int) block_pointer, void const*) const + 242 12 dyld 0x10bd78e26 invocation function for block in dyld3::MachOFile::forEachSection(void (dyld3::MachOFile::SectionInfo const&, bool, bool&) block_pointer) const + 557 13 dyld 0x10bd47db3 dyld3::MachOFile::forEachLoadCommand(Diagnostics&, void (load_command const*, bool&) block_pointer) const + 129 14 dyld 0x10bd78bb7 dyld3::MachOFile::forEachSection(void (dyld3::MachOFile::SectionInfo const&, bool, bool&) block_pointer) const + 179 15 dyld 0x10bd81604 dyld3::MachOAnalyzer::forEachInitializer(Diagnostics&, dyld3::MachOAnalyzer::VMAddrConverter const&, void (unsigned int) block_pointer, void const*) const + 466 16 dyld 0x10bd5ad82 dyld4::Loader::findAndRunAllInitializers(dyld4::RuntimeState&) const + 144 17 dyld 0x10bd6165a dyld4::PrebuiltLoader::runInitializers(dyld4::RuntimeState&) const + 30 18 dyld 0x10bd6e76e dyld4::APIs::runAllInitializersForMain() + 38 19 dyld 0x10bd4c38d dyld4::prepare(dyld4::APIs&, dyld3::MachOAnalyzer const*) + 3443 20 dyld 0x10bd4b4e4 start + 388 Can someone at Apple with the right domain expertise confirm that this is the type of crash you would see because the framework was built assuming it would run on macOS 14.6 and later, and when facing an older environment (e.g. ObjC runtime) it lacks extra code that would ensure backward compatibility with the earlier ObjC runtime found on macOS 12.x?

I'm using a 4 channel USB Audio interface, with 4 microphones, and want to process them through 4 independent effect chains. However the output from AVAudioInputNode is a single 4 channel bus. How can I split this into 4 mono busses? The following code splits the input into 4 copies, and routes them through the effects, but each bus contains all four channels. How can I remap the channels to remove the unwanted channels from the bus? I tried using channelMap on the mixer node but that had no effect. I'm currently using this code primarily on iOS but it should be portable between iOS and MacOS. It would be possible to do this through a Matrix Mixer Node, but that seems completely overkill, for such a basic operation. I'm already using a Matrix Mixer to combine the inputs, and it's not well supported in AVAudioEngine. AVAudioInputNode *inputNode=[engine inputNode]; [inputNode setVoiceProcessingEnabled:NO error:nil]; NSMutableArray *micDestinations=[NSMutableArray arrayWithCapacity:trackCount]; for(i=0;i<trackCount;i++) { fixMicFormat[i]=[AVAudioMixerNode new]; [engine attachNode:fixMicFormat[i]]; // And create reverb/compressor and eq the same way... [engine connect:reverb[i] to:matrixMixerNode fromBus:0 toBus:i format:nil]; [engine connect:eq[i] to:reverb[i] fromBus:0 toBus:0 format:nil]; [engine connect:compressor[i] to:eq[i] fromBus:0 toBus:0 format:nil]; [engine connect:fixMicFormat[i] to:compressor[i] fromBus:0 toBus:0 format:nil]; [micDestinations addObject:[[AVAudioConnectionPoint alloc] initWithNode:fixMicFormat[i] bus:0] ]; } AVAudioFormat *inputFormat = [inputNode outputFormatForBus: 1]; [engine connect:inputNode toConnectionPoints:micDestinations fromBus:1 format:inputFormat];

Issue: After iOS 18.5 release, our app is experiencing a significant increase in AVCaptureSessionInterruptionReason.videoDeviceNotAvailableWithMultipleForegroundApps errors. Details: Our camera-related code has not been updated recently.However, we've observed that the error rate has significantly increased starting from May 2025. The error rate has risen from approximately 0.02% (2 in 10,000 users) to 0.1% (1 in 1,000 users). This represents a 5x increase in error occurrence. The frequency has increased noticeably since iOS 18.5 This is affecting our app's camera functionality and user experience Questions: Are there any known changes in iOS 18.5 regarding camera access management? What are the recommended best practices to handle this interruption reason? Are there any API changes we should be aware of? Best, Shay

Hello Apple Developer Community, I am seeking clarification on the intended display behavior of HLS audio tracks within the iOS 26 (or current beta) native player, specifically concerning the NAME and LANGUAGE attributes of the EXT-X-MEDIA tag. In our HLS manifests, we define alternative audio tracks using EXT-X-MEDIA tags, like so: #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio",LANGUAGE="ja",NAME="AUDIO-1",DEFAULT=YES,AUTOSELECT=YES,URI="audio_ja.m3u8" #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio",LANGUAGE="ja",NAME="AUDIO-2",URI="audio_en.m3u8" Our observation is that when an audio track is selected and its name is displayed in the native iOS media controls (e.g., Control Center or within a full-screen video player's UI), the value specified in the NAME attribute ("AUDIO-1", "AUDIO-2") does not seem to be used. Instead, the display appears to derive from the LANGUAGE attribute ("ja", "en"), often showing the system's localized string for that language (e.g., "Japanese", "English"). We would like to understand the official or intended behavior regarding this. Is it the expected behavior for the iOS native player to prioritize the LANGUAGE attribute (or its localized equivalent) over the NAME attribute for displaying the selected audio track's label? If this is the intended design, what is the recommended best practice for developers who wish to present a custom, human-readable name for audio tracks (beyond the standard language name) in the native iOS UI? Are there any specific AVPlayer properties or AVMediaSelectionOption considerations that would allow more granular control over this display, or is this entirely managed by the system based on the LANGUAGE attribute? Any insights or official guidance on this behavior in iOS 26 (and potentially previous versions) would be greatly appreciated. Thank you for your time and assistance.

Hi! I am making an app for Apple Vision pro (VisionOS 2.5) that is scanning the surroundings and recognises all the texts around you. I tried to use the AVCaptureSession library, but when I run the app from xcode on the real AVP device, the camera is not accessible. I enabled the camera access in my Info.plist: NSCameraUsageDescription Used for live text recognition and I checked camera settings in the AVP, there are no restrictions. However I have always a black square with a crossed camera icon displayed instead of the image from the camera. I tried a couple of different apps from Github using the AVCaptureSession and they all display the black square instead of the picture. What can be wrong with the camera?

The operation couldn’t be completed. (CoreMediaErrorDomain error -19156 - The operation couldn’t be completed. (CoreMediaErrorDomain error -19156.

I’m building a SwiftUI app whose primary job is to play audio. I manage all of the Now-Playing metadata and Command center manually via the available shared instances: MPRemoteCommandCenter.shared() MPNowPlayingInfoCenter.default().nowPlayingInfo In certain parts of the app I also need to display videos, but as soon as I attach another AVPlayer, it automatically pushes its own metadata into the Control Center and overwrites my audio info. What I need: a way to show video inline without ever having that video player update the system’s Now-Playing info (or Control Center). In my app, I start by configuring the shared audio session do { try AVAudioSession.sharedInstance().setCategory(.playback, mode: .default, options: [ .allowAirPlay, .allowBluetoothA2DP ]) try AVAudioSession.sharedInstance().setActive(true) } catch { NSLog("%@", "**** Failed to set up AVAudioSession \(error.localizedDescription)") } and then set the MPRemoteCommandCenter commands and MPNowPlayingInfoCenter nowPlayingInfo like mentioned above. All this works without any issues as long as I only have one AVPlayer in my app. But when I add other AVPlayers to display some videos (and keep the main AVPlayer for the sound) they push undesired updates to MPNowPlayingInfoCenter: struct VideoCardView: View { @State private var player: AVPlayer let videoName: String init(player: AVPlayer = AVPlayer(), videoName: String) { self.player = player self.videoName = videoName guard let path = Bundle.main.path(forResource: videoName, ofType: nil) else { return } let url = URL(fileURLWithPath: path) let item = AVPlayerItem(url: url) self.player.replaceCurrentItem(with: item) } var body: some View { VideoPlayer(player: player) .aspectRatio(contentMode: .fill) .onAppear { player.isMuted = true player.allowsExternalPlayback = false player.actionAtItemEnd = .none player.play() MPNowPlayingInfoCenter.default().nowPlayingInfo = nil MPNowPlayingInfoCenter.default().playbackState = .stopped NotificationCenter.default.addObserver(forName: .AVPlayerItemDidPlayToEndTime, object: player.currentItem, queue: .main) { notification in guard let finishedItem = notification.object as? AVPlayerItem, finishedItem === player.currentItem else { return } player.seek(to: .zero) player.play() } } .onDisappear { player.pause() } } } Which is why I tried adding: MPNowPlayingInfoCenter.default().nowPlayingInfo = nil MPNowPlayingInfoCenter.default().playbackState = .stopped // or .interrupted, .unknown But that didn't work. I also tried making a wrapper around the AVPlayerViewController in order to set updatesNowPlayingInfoCenter to false, but that didn’t work either: struct CustomAVPlayerView: UIViewControllerRepresentable { let player: AVPlayer func makeUIViewController(context: Context) -> AVPlayerViewController { let vc = AVPlayerViewController() vc.player = player vc.updatesNowPlayingInfoCenter = false vc.showsPlaybackControls = false return vc } func updateUIViewController(_ controller: AVPlayerViewController, context: Context) { controller.player = player } } Hence any help on how to embed video in SwiftUI without its AVPlayer touching MPNowPlayingInfoCenter would be greatly appreciated. All this was tested on an actual device with iOS 18.4.1, and built with Xcode 16.2 on macOS 15.5

FairPlay-Protected HLS Files Not Transferred via Quick Start I have an iOS app that downloads HLS files, which are protected by FairPlay. These files are stored locally, and their locations are managed using Core Data. When playing these tracks, I use AVURLAsset to access the stored file paths. Recently, a client upgraded to a new iPhone and used Quick Start to transfer data from his old device. While all other app data was successfully transferred, including Core Data records and UserDefaults, the actual HLS files were missing. As a result, the app retained metadata about the downloaded content, but the files themselves were gone, causing playback failures. Does Quick Start exclude certain types of locally stored files, especially DRM-protected HLS downloads, or is the issue related to how FairPlay-protected content is handled during the transfer of locally stored files?

Does the library exists in xCode 16.4? "import WorldCaptureKit" gives error "No such module 'WorldCaptureKit'". And I do not find any information about the library in the apple documentation. But AI keeps suggesting me to use the library

I'm wondering if someone happened issues with currentPlaybackRate in released version of iOS 26.0? There is no issue happened in case of iOS 18.5. When I changed currentPlaybackRate on iOS 26.0, it seems to unexpectedly change currentPlaybackRate to be 0 or 1.0 forcibly no matter DRM or non-DRM contents. And also, playing music will be abnormal behavior and unstable with noise if currentPlaybackRate is not 1.0. And changes stop state and play state frequently.

I'm trying to implement airplay into my app. I can successfully playback sound and trigger the airplay selector sheet. If the target device is a Bluetooth only device I can connect with no problem and stream the audio to the Bluetooth device, but if the audio device is a airplay specific device like a HomePod or an Apple TV when I select it, I get a spinning icon, indicating that it is trying to connect, and eventually it times out and stops without connecting. I don't believe it is an AirPlay audio issue because if I go to a different app, for example a podcast app and select my HomePods for output, and then switch back to my app. My audio will correctly stream to the HomePod. Not only that, I have it so that my icon will change color to indicate that it is connected via airplay and it is correctly indicating that it is connected via AirPlay. But I cannot then disconnect it using the Airplay selector. The issue appears to be in the AirPlay selection side, which I have spent several days attempting to troubleshoot mostly using ChatGPT to suggest code different than what I have to maybe work around the issue. Mostly it is focused on the audio player section, but it doesn't seem like that is really the route that is the problem.

Hi everyone, I’m running into an issue with PHPickerFilter when using PHPickerViewController. When I configure the picker with a .videos and .livePhotos filter, it seems to work correctly in the Photos tab. However, when I switch to the Collections tab, the filter doesn’t always apply — users can still see and select static image assets in certain collections (e.g. from one of the People & Pets sections). Here’s a simplified snippet of my setup: var configuration = PHPickerConfiguration(photoLibrary: .shared()) configuration.selectionLimit = 1 var filters = [PHPickerFilter]() filters.append(.videos) filters.append(.livePhotos) configuration.filter = PHPickerFilter.any(of: filters) configuration.preferredAssetRepresentationMode = .current let picker = PHPickerViewController(configuration: configuration) picker.delegate = self present(picker, animated: true) Expected behavior: The picker should consistently respect the filter across both Photos and Collections tabs, only showing assets that match the filter. Actual behavior: The filter seems to apply correctly in the Photos tab, but in the Collections tab, other asset types are still visible/selectable. Has anyone else encountered this behavior? Is this expected or a known issue, or am I missing something in the configuration? Thanks in advance!

Hi, when using ApplicationMusicPlayer from MusicKit my app automatically gets the media controls on the lock screen: Play/ Pause, Skip Buttons, Playback Position etc. I would like to customize these. Tried a bunch of things, e.g. using MPRemoteCommandCenter. So far I haven't had any success. Does anyone know how I can customize the media controls of ApplicationMusicPlayer. Thank you.

I'm developing an iOS app using AVFoundation for real-time video capture and object detection. While implementing torch functionality with camera switching (between Wide and Ultra-Wide lenses), I encountered a critical issue where the camera freezes when toggling the torch while the Ultra-Wide camera is active. Issue If the torch is ON and I switch from Wide to Ultra-Wide, the camera freezes If the Ultra-Wide camera is active and I try to turn the torch ON, the camera freezes The iPhone Camera app allows using the torch while recording video with the Ultra-Wide lens, so this should be possible via AVFoundation as well. Code snippet DispatchQueue.global(qos: .userInitiated).async { [weak self] in guard let self = self else { return } let isSwitchingToUltraWide = !self.isUsingFisheyeCamera let cameraType: AVCaptureDevice.DeviceType = isSwitchingToUltraWide ? .builtInUltraWideCamera : .builtInWideAngleCamera let cameraName = isSwitchingToUltraWide ? "Ultra Wide" : "Wide" guard let selectedCamera = AVCaptureDevice.default(cameraType, for: .video, position: .back) else { DispatchQueue.main.async { self.showAlert(title: "Camera Error", message: "\(cameraName) camera is not available on this device.") } return } do { let currentInput = self.videoCapture.captureSession.inputs.first as? AVCaptureDeviceInput self.videoCapture.captureSession.beginConfiguration() if isSwitchingToUltraWide &amp;&amp; self.isFlashlightOn { self.forceEnableTorchThroughWide() } if let currentInput = currentInput { self.videoCapture.captureSession.removeInput(currentInput) } let videoInput = try AVCaptureDeviceInput(device: selectedCamera) self.videoCapture.captureSession.addInput(videoInput) self.videoCapture.captureSession.commitConfiguration() self.videoCapture.updateVideoOrientation() DispatchQueue.main.async { if let barButton = sender as? UIBarButtonItem { barButton.title = isSwitchingToUltraWide ? "Wide" : "Ultra Wide" barButton.tintColor = isSwitchingToUltraWide ? UIColor.systemGreen : UIColor.white } print("Switched to \(cameraName) camera.") } self.isUsingFisheyeCamera.toggle() } catch { DispatchQueue.main.async { self.showAlert(title: "Camera Error", message: "Failed to switch to \(cameraName) camera: \(error.localizedDescription)") } } } } Expected Behavior Torch should be able to work when Ultra-Wide is active, just like the iPhone Camera app does. The camera should not freeze when switching between Wide and Ultra-Wide with the torch ON. AVCaptureSession should not crash when toggling the torch while Ultra-Wide is active. Questions &amp; Help Needed Is this a known issue with AVFoundation? How does the iPhone Camera app allow using the torch while recording in Ultra-Wide? What’s the correct way to switch between Wide and Ultra-Wide cameras without freezing when the torch is active? Info Device tested: iPhone 13 Pro / iPhone 15 Pro / Iphone 15 iOS Version: iOS 17.3 / iOS 18.0 Xcode Version: 16.2

I'm working on a photo app and I want to allow the user to display, edit and delete photos. I can fetch all photos using PHAsset.fetchAssets(with: options). This works as intended. However, I can't seem to find a way to prevent the user from seeing photos from a Shared Library. The PHAssetSourceType only contains typeCloudShared to only show items from a specific album; not library. How can I filter by iCloud Shared Library?