Good day, ladies and gents. I have an application that reads audio from the microphone. I'd like it to also be able to read from the Mac's audio output stream. (A bonus would be if it could detect when the Mac is playing music.) I'd eventually be able to figure it out reading docs, but if someone can give a hint, I'd be very grateful, and would owe you the libation of your choice. Here's the code used to set up the AudioUnit: -(NSString*) configureAU { AudioComponent component = NULL; AudioComponentDescription description; OSStatus err = noErr; UInt32 param; AURenderCallbackStruct callback; if( audioUnit ) { AudioComponentInstanceDispose( audioUnit ); audioUnit = NULL; } // was CloseComponent // Open the AudioOutputUnit description.componentType = kAudioUnitType_Output; description.componentSubType = kAudioUnitSubType_HALOutput; description.componentManufacturer = kAudioUnitManufacturer_Apple; description.componentFlags = 0; description.componentFlagsMask = 0; if( component = AudioComponentFindNext( NULL, &description ) ) { err = AudioComponentInstanceNew( component, &audioUnit ); if( err != noErr ) { audioUnit = NULL; return [ NSString stringWithFormat: @"Couldn't open AudioUnit component (ID=%d)", err] ; } } // Configure the AudioOutputUnit: // You must enable the Audio Unit (AUHAL) for input and output for the same device. // When using AudioUnitSetProperty the 4th parameter in the method refers to an AudioUnitElement. // When using an AudioOutputUnit for input the element will be '1' and the output element will be '0'. param = 1; // Enable input on the AUHAL err = AudioUnitSetProperty( audioUnit, kAudioOutputUnitProperty_EnableIO, kAudioUnitScope_Input, 1, &param, sizeof(UInt32) ); chkerr("Couldn't set first EnableIO prop (enable inpjt) (ID=%d)"); param = 0; // Disable output on the AUHAL err = AudioUnitSetProperty( audioUnit, kAudioOutputUnitProperty_EnableIO, kAudioUnitScope_Output, 0, &param, sizeof(UInt32) ); chkerr("Couldn't set second EnableIO property on the audio unit (disable ootpjt) (ID=%d)"); param = sizeof(AudioDeviceID); // Select the default input device AudioObjectPropertyAddress OutputAddr = { kAudioHardwarePropertyDefaultInputDevice, kAudioObjectPropertyScopeGlobal, kAudioObjectPropertyElementMaster }; err = AudioObjectGetPropertyData( kAudioObjectSystemObject, &OutputAddr, 0, NULL, &param, &inputDeviceID ); chkerr("Couldn't get default input device (ID=%d)"); // Set the current device to the default input unit err = AudioUnitSetProperty( audioUnit, kAudioOutputUnitProperty_CurrentDevice, kAudioUnitScope_Global, 0, &inputDeviceID, sizeof(AudioDeviceID) ); chkerr("Failed to hook up input device to our AudioUnit (ID=%d)"); callback.inputProc = AudioInputProc; // Setup render callback, to be called when the AUHAL has input data callback.inputProcRefCon = self; err = AudioUnitSetProperty( audioUnit, kAudioOutputUnitProperty_SetInputCallback, kAudioUnitScope_Global, 0, &callback, sizeof(AURenderCallbackStruct) ); chkerr("Could not install render callback on our AudioUnit (ID=%d)"); param = sizeof(AudioStreamBasicDescription); // get hardware device format err = AudioUnitGetProperty( audioUnit, kAudioUnitProperty_StreamFormat, kAudioUnitScope_Input, 1, &deviceFormat, &param ); chkerr("Could not install render callback on our AudioUnit (ID=%d)"); audioChannels = MAX( deviceFormat.mChannelsPerFrame, 2 ); // Twiddle the format to our liking actualOutputFormat.mChannelsPerFrame = audioChannels; actualOutputFormat.mSampleRate = deviceFormat.mSampleRate; actualOutputFormat.mFormatID = kAudioFormatLinearPCM; actualOutputFormat.mFormatFlags = kAudioFormatFlagIsFloat | kAudioFormatFlagIsPacked | kAudioFormatFlagIsNonInterleaved; if( actualOutputFormat.mFormatID == kAudioFormatLinearPCM && audioChannels == 1 ) actualOutputFormat.mFormatFlags &= ~kLinearPCMFormatFlagIsNonInterleaved; #if __BIG_ENDIAN__ actualOutputFormat.mFormatFlags |= kAudioFormatFlagIsBigEndian; #endif actualOutputFormat.mBitsPerChannel = sizeof(Float32) * 8; actualOutputFormat.mBytesPerFrame = actualOutputFormat.mBitsPerChannel / 8; actualOutputFormat.mFramesPerPacket = 1; actualOutputFormat.mBytesPerPacket = actualOutputFormat.mBytesPerFrame; // Set the AudioOutputUnit output data format err = AudioUnitSetProperty( audioUnit, kAudioUnitProperty_StreamFormat, kAudioUnitScope_Output, 1, &actualOutputFormat, sizeof(AudioStreamBasicDescription)); chkerr("Could not change the stream format of the output device (ID=%d)"); param = sizeof(UInt32); // Get the number of frames in the IO buffer(s) err = AudioUnitGetProperty( audioUnit, kAudioDevicePropertyBufferFrameSize, kAudioUnitScope_Global, 0, &audioSamples, &param ); chkerr("Could not determine audio sample size (ID=%d)"); err = AudioUnitInitialize( audioUnit ); // Initialize the AU chkerr("Could not initialize the AudioUnit (ID=%d)"); // Allocate our audio buffers audioBuffer = [self allocateAudioBufferListWithNumChannels: actualOutputFormat.mChannelsPerFrame size: audioSamples * actualOutputFormat.mBytesPerFrame]; if( audioBuffer == NULL ) { [ self cleanUp ]; return [NSString stringWithFormat: @"Could not allocate buffers for recording (ID=%d)", err]; } return nil; } (...again, it would be nice to know if audio output is active and thereby choose the clean output stream over the noisy mic, but that would be a different chunk of code, and my main question may just be a quick edit to this chunk.) Thanks for your attention! ==Dave [p.s. if i get more than one useful answer, can i "Accept" more than one, to spread the credit around?] {pps: of course, the code lines up prettier in a monospaced font!}

Hi everyone, I’m testing audio recording on an iPhone 15 Plus using AVFoundation. Here’s a simplified version of my setup: let settings: [String: Any] = [ AVFormatIDKey: Int(kAudioFormatLinearPCM), AVSampleRateKey: 8000, AVNumberOfChannelsKey: 1, AVLinearPCMBitDepthKey: 16, AVLinearPCMIsFloatKey: false ] audioRecorder = try AVAudioRecorder(url: fileURL, settings: settings) audioRecorder?.record() When I check the recorded file’s sample rate, it logs: Actual sample rate: 8000.0 However, when I inspect the hardware sample rate: try session.setCategory(.playAndRecord, mode: .default) try session.setActive(true) print("Hardware sample rate:", session.sampleRate) I consistently get: `Hardware sample rate: 48000.0 My questions are: Is the iPhone mic actually capturing at 8 kHz, or is it recording at 48 kHz and then downsampling to 8 kHz internally? Is there any way to force the hardware to record natively at 8 kHz? If not, what’s the recommended approach for telephony-quality audio (true 8 kHz) on iOS devices? Thanks in advance for your guidance!

Hello, I am building an iOS-only, commercial app that uses AVSpeechSynthesizer with system voices, strictly using the APIs provided by Apple. Before distributing the app, I want to ensure that my current implementation does not conflict with the iOS Software License Agreement (SLA) and is aligned with Apple’s intended usage. For a better playback experience (more accurate estimation of utterance duration and smoother skip forward/backward during playback), I currently synthesize speech using: AVSpeechSynthesizer.write(_:toBufferCallback:) Converting the received AVAudioPCMBuffer buffers into audio data Storing the audio inside the app sandbox Playing it back using AVAudioPlayer / AVAudioEngine The cached audio is: Generated fully on-device using system voices Stored only inside the app’s private container Used only for internal playback controls (timeline, seek, skip ±5 seconds) Never shared, exported, uploaded, or exposed outside the app The alternative approaches would be: Keeping the generated audio entirely in memory (RAM) for playback purposes, without writing it to the file system at any point Or using AVSpeechSynthesizer.speak(_:) and playing speech strictly in real time which has a poorer user experience compared to my approach I have reviewed the current iOS Software License Agreement: https://www.apple.com/legal/sla/docs/iOS18_iPadOS18.pdf In particular, section (f) mentions restrictions around System Characters, Live Captions, and Personal Voice, including the following excerpt: “…use … only for your personal, non-commercial use… No other creation or use of the System Characters, Live Captions, or Personal Voice is permitted by this License, including but not limited to the use, reproduction, display, performance, recording, publishing or redistribution in a … commercial context.” I do not see a specific reference in the SLA to system text-to-speech voices used via AVSpeechSynthesizer, and I want to be certain that temporarily caching synthesized speech for internal, non-exported playback is acceptable in a commercial app. My question is: Is caching AVSpeechSynthesizer system-voice output inside the app sandbox for internal playback acceptable, or is Apple’s recommended approach to rely only on real-time playback (speak(_:)) or strictly in-memory buffering without file storage? If this question falls outside DTS technical scope and is instead a policy or licensing matter, I would appreciate guidance on the authoritative Apple documentation or the correct Apple team/contact. Thank you.

My app - natively iOS but built with the "Designed for iPad" option to run on Mac - does not recognise an attached USB microphone when running on a Mac. This line int32_t items = (int32_t) [[[AVAudioSession sharedInstance] availableInputs] count ]; returns 1, which is the Mac internal mic. On iPad and iPhone it sees both the internal mic and the USB mic. Is this an inherent "Designed for iPad" restriction, and is there some trick I can pull to get the USB microphone to be recognised by the system?

3 I am working on an application to get when input audio device is being used. Basically I want to know the application using the microphone (built-in or external) This app runs on macOS. For Mac versions starting from Sonoma I can use this code: int getAudioProcessPID(AudioObjectID process) { pid_t pid; if (@available(macOS 14.0, *)) { constexpr AudioObjectPropertyAddress prop { kAudioProcessPropertyPID, kAudioObjectPropertyScopeGlobal, kAudioObjectPropertyElementMain }; UInt32 dataSize = sizeof(pid); OSStatus error = AudioObjectGetPropertyData(process, &prop, 0, nullptr, &dataSize, &pid); if (error != noErr) { return -1; } } else { // Pre sonoma code goes here } return pid; } which works. However, kAudioProcessPropertyPID was added in macOS SDK 14.0. Does anyone know how to achieve the same functionality on previous versions?

Hi, On macOS I used to open MP3 and MP4 files with ExtAudioFile. For a few years it doesn't work anymore. So I decided to try different macOS API using the AudioFileID of AudioToolbox framework. I decided to write a test: https://gist.github.com/joelkraehemann/7f5b241b52ca38c3a765c138fb647588 It fails right here: AudioFileOpenWithCallbacks() By telling OSStatus error 1954115647, which means kAudioFileUnsupportedFileTypeError. The filename was set to an MP4 file: ~/Music/test.mp4 Howto fix this? regards, Joël

I am developing an app with transcription and I am exploring ways to improve the transcription from the SpeechAnalyzer/Transcriber for technical terms. SFSpeech... recognition had the capability of being augmented by contextualStrings. Does something similar exist for SpeechAnalyzer/Transcriber? If so please point me towards the documentation and any sample code that may exist for this. If there are other options, please let me know.

There appears to be no method of going forward or backwards in Get Info in the Music application,

iPhoneやiPadにおいて、画面上のボタンなどをタップした際に、特定の楽器音を発音させる方法をご存知の方いらっしゃいませんか？ 現在音楽学習アプリを作成途中で、画面上の鍵盤や指板のボタン状のframeに、単音又は和音を割当て発音させる事を考えております SwiftUIのcodeのみで実現できないでしょうか 嘗て、MIDIのlevel1の楽器の発音機能があった様に記憶していますが、現在のOS上では同様の機能を実装してないように思えます 皆様のお知恵をお貸しください

Your draft looks great! Here's a refined version with the iOS 17 comparison emphasized and slightly better flow: Hi Apple Engineers and fellow developers, I'm experiencing a critical regression with ShazamKit's background operation on iOS 18. ShazamKit's SHManagedSession stops identifying songs in the background after approximately 20 seconds on iOS 18, while the exact same code works perfectly on iOS 17. The behavior is consistent: the app works perfectly in the foreground, but when backgrounded or device is locked, it initially works for about 20 seconds then stops identifying new songs. The microphone indicator remains active suggesting audio access is maintained, but ShazamKit doesn't send identified songs in the background until you open the app again. Detection immediately resumes when bringing the app to foreground. My technical setup uses SHManagedSession for continuous matching with background modes properly configured in Info.plist including audio mode, and Background App Refresh enabled. I've tested this on physical devices running iOS 18.0 through 18.5 with the same results across all versions. The exact same code running on iOS 17 devices works flawlessly in the background. To reproduce: initialize SHManagedSession and start matching, begin song identification in foreground, background the app or lock device, play different songs which are initially detected for about 20 seconds, then after the timeout period new songs are no longer identified until you bring the app to foreground. This regression has impacted my production app as users who rely on continuous background music identification are experiencing a broken feature. I submitted this as Feedback ID FB15255903 last September with no solution so far. I've created a minimal demo project that reproduces this issue: https://github.com/tfmart/ShazamKitBackground Has anyone else experienced this ShazamKit background regression on iOS 18? Are there any known workarounds or alternative approaches? Given the time this issue has persisted, could we please get acknowledgment of this regression, expected timeline for a fix, or any recommended workarounds? Testing environment is Xcode 16.0+ on iOS 18.0-18.5 across multiple physical device models. Any guidance would be greatly appreciated.

Using an iPhone Pro 12 running iOS 26.0.1, with AirPods Pro 3. Camera app does capture video with what seems to be "Studio Quality Recording". Am trying to replicate that SQR with my own Camera like app, and while I can pull audio in from the APP3 mic, and my video capture app is recording a 48,000Hz high-bitrate video, the audio still sounds non-SQR. I'm seeing bluetoothA2DP , bluetoothLE , bluetoothHFP as portType, and not sure if SQR depends on one of those? Is there sample code demonstrating a SQR capture? Nevermind video and camera, just audio even? Also, I don't understand what SQR is doing between the APP3 and the iPhone. What codec is that? What bitrate is that? If I capture video using Capture and inspect the audio stream I see mono 74.14 kbit/s MPEG-4 AAC, 48000 Hz. But I assume that's been recompressed and not really giving me any insight into the APP3 H2 transmission?

I want the audio session to always use the built-in microphone. However, when using the setPreferredInput() method like in this example private func enableBuiltInMic() { // Get the shared audio session. let session = AVAudioSession.sharedInstance() // Find the built-in microphone input. guard let availableInputs = session.availableInputs, let builtInMicInput = availableInputs.first(where: { $0.portType == .builtInMic }) else { print("The device must have a built-in microphone.") return } // Make the built-in microphone input the preferred input. do { try session.setPreferredInput(builtInMicInput) } catch { print("Unable to set the built-in mic as the preferred input.") } } and calling that function once in the initializer, the audio session still switches to the external microphone once one is plugged in. The session's preferredInput is nil again at that point, even if the built-in microphone is still listed in availableInputs. So, why is the preferredInput suddenly reset? when would be the appropriate time to set the preferredInput again? Observing the session’s availableInputs did not work and setting the preferredInput again in the routeChangeNotification handler seems a bad choice as it’s already a bit too late then.

I have a PCM audio buffer (AVAudioPCMFormatInt16). When I try to play it using AVPlayerNode / AVAudioEngine an exception is thrown: "[[busArray objectAtIndexedSubscript:(NSUInteger)element] setFormat:format error:&nsErr]: returned false, error Error Domain=NSOSStatusErrorDomain Code=-10868 (related thread https://forums.developer.apple.com/forums/thread/700497?answerId=780530022#780530022) If I convert the buffer to AVAudioPCMFormatFloat32 playback works. My questions are: Does AVAudioEngine / AVPlayerNode require AVAudioPCMBuffer to be in the Float32 format? Is there a way I can configure it to accept another format instead for my application? If 1 is YES is this documented anywhere? If 1 is YES is this required format subject to change at any point? Thanks! I was looking to watch the "AVAudioEngine in Practice" session video from WWDC 2014 but I can't find it anywhere (https://forums.developer.apple.com/forums/thread/747008).

I work on an iOS app that records video and audio. We've been getting reports for a while from users who are experiencing their video recordings being cut off. After investigating, I found that many users are receiving the AVAudioSessionMediaServicesWereResetNotification (.mediaServicesWereResetNotification) notification while recording. It's associated with the AVFoundationErrorDomain[-11819] error, which seems to indicate that the system audio daemon crashed. We have a handler registered to end the recording, show the user a prompt, and restart our AV sessions. However, from our logs this looks to be happening to hundreds of users every day and it's not an ideal user experience, so I would like to figure out why this is happening and if it's due to something that we're doing wrong. The debug menu option to trigger the audio session reset is not of much use, because it can't be triggered unless you leave the app and go to system settings. So our app can't be recording video when the debug reset is triggered. So far I haven't found a way to reproduced the issue locally, but I can see that it's happening to users from logs. I've found some posts online from developers experiencing similar issues, but none of them seem to directly address our issue. The system error doesn't include a userInfo dictionary, and as far as I can tell it's a system daemon crash so any logs would need to be captured from the OS. Is there any way that I could get more information about what may be causing this error that I may have missed?

In Instruments, I'm seeing "Zero Time Stamp" events in the "Audio Server" lane. What does that mean?

After update,WeChat voice chatting no sounds, please help

Hi, I try to record audio on the iPhone with the AVAudioRecorder and Xcode 26.0.1. Maybe the problem is that I can not record audio with the simulator. But there's a menu for audio. In the plist I added 'Privacy - Microphone Usage Description' and I ask for permission before recording. if await AVAudioApplication.requestRecordPermission() { print("permission granted") recordPermission = true } else { print("permission denied") } Permission is granted. let settings: [String : Any] = [ AVFormatIDKey: kAudioFormatMPEG4AAC, AVSampleRateKey: 12000, AVNumberOfChannelsKey: 1, AVEncoderAudioQualityKey: AVAudioQuality.high.rawValue ] recorder = try AVAudioRecorder(url: filename, settings: settings) let prepared = recorder.prepareToRecord() print("prepared started: \(prepared)") let started = recorder.record() print("recording started: \(started)") started is always false and I tried many settings. Error messages AddInstanceForFactory: No factory registered for id <CFUUID 0x600000211480> F8BB1C28-BAE8-11D6-9C31-00039315CD46 AudioConverter.cpp:1052 Failed to create a new in process converter -> from 0 ch, 12000 Hz, .... (0x00000000) 0 bits/channel, 0 bytes/packet, 0 frames/packet, 0 bytes/frame to 1 ch, 12000 Hz, aac (0x00000000) 0 bits/channel, 0 bytes/packet, 1024 frames/packet, 0 bytes/frame, with status -50 AudioQueueObject.cpp:1892 BuildConverter: AudioConverterNew returned -50 from: 0 ch, 12000 Hz, .... (0x00000000) 0 bits/channel, 0 bytes/packet, 0 frames/packet, 0 bytes/frame to: 1 ch, 12000 Hz, aac (0x00000000) 0 bits/channel, 0 bytes/packet, 1024 frames/packet, 0 bytes/frame prepared started: true AudioQueueObject.cpp:7581 ConvertInput: aq@0x10381be00: AudioConverterFillComplexBuffer returned -50, packetCount 5 recording started: false All examples I find are the same, but apparently there must be something different.

I have a simple AVAudioEngine graph as follows: AVAudioPlayerNode -> AVAudioUnitEQ -> AVAudioUnitTimePitch -> AVAudioUnitReverb -> Main mixer node of AVAudioEngine. I noticed that whenever I have AVAudioUnitTimePitch or AVAudioUnitVarispeed in the graph, I noticed a very distinct crackling/popping sound in my Airpods Pro 2 when starting up the engine and playing the AVAudioPlayerNode and unable to find the reason why this is happening. When I remove the node, the crackling completely goes away. How do I fix this problem since i need the user to be able to control the pitch and rate of the audio during playback. import AVKit @Observable @MainActor class AudioEngineManager { nonisolated private let engine = AVAudioEngine() private let playerNode = AVAudioPlayerNode() private let reverb = AVAudioUnitReverb() private let pitch = AVAudioUnitTimePitch() private let eq = AVAudioUnitEQ(numberOfBands: 10) private var audioFile: AVAudioFile? private var fadePlayPauseTask: Task<Void, Error>? private var playPauseCurrentFadeTime: Double = 0 init() { setupAudioEngine() } private func setupAudioEngine() { guard let url = Bundle.main.url(forResource: "Song name goes here", withExtension: "mp3") else { print("Audio file not found") return } do { audioFile = try AVAudioFile(forReading: url) } catch { print("Failed to load audio file: \(error)") return } reverb.loadFactoryPreset(.mediumHall) reverb.wetDryMix = 50 pitch.pitch = 0 // Increase pitch by 500 cents (5 semitones) engine.attach(playerNode) engine.attach(pitch) engine.attach(reverb) engine.attach(eq) // Connect: player -> pitch -> reverb -> output engine.connect(playerNode, to: eq, format: audioFile?.processingFormat) engine.connect(eq, to: pitch, format: audioFile?.processingFormat) engine.connect(pitch, to: reverb, format: audioFile?.processingFormat) engine.connect(reverb, to: engine.mainMixerNode, format: audioFile?.processingFormat) } func prepare() { guard let audioFile else { return } playerNode.scheduleFile(audioFile, at: nil) } func play() { DispatchQueue.global().async { [weak self] in guard let self else { return } engine.prepare() try? engine.start() DispatchQueue.main.async { [weak self] in guard let self else { return } playerNode.play() fadePlayPauseTask?.cancel() playPauseCurrentFadeTime = 0 fadePlayPauseTask = Task { [weak self] in guard let self else { return } while true { let volume = updateVolume(for: playPauseCurrentFadeTime / 0.1, rising: true) // Ramp up volume until 1 is reached if volume >= 1 { break } engine.mainMixerNode.outputVolume = volume try await Task.sleep(for: .milliseconds(10)) playPauseCurrentFadeTime += 0.01 } engine.mainMixerNode.outputVolume = 1 } } } } func pause() { fadePlayPauseTask?.cancel() playPauseCurrentFadeTime = 0 fadePlayPauseTask = Task { [weak self] in guard let self else { return } while true { let volume = updateVolume(for: playPauseCurrentFadeTime / 0.1, rising: false) // Ramp down volume until 0 is reached if volume <= 0 { break } engine.mainMixerNode.outputVolume = volume try await Task.sleep(for: .milliseconds(10)) playPauseCurrentFadeTime += 0.01 } engine.mainMixerNode.outputVolume = 0 playerNode.pause() // Shut down engine once ramp down completes DispatchQueue.global().async { [weak self] in guard let self else { return } engine.pause() } } } private func updateVolume(for x: Double, rising: Bool) -> Float { if rising { // Fade in return Float(pow(x, 2) * (3.0 - 2.0 * (x))) } else { // Fade out return Float(1 - (pow(x, 2) * (3.0 - 2.0 * (x)))) } } func setPitch(_ value: Float) { pitch.pitch = value } func setReverbMix(_ value: Float) { reverb.wetDryMix = value } } struct ContentView: View { @State private var audioManager = AudioEngineManager() @State private var pitch: Float = 0 @State private var reverb: Float = 0 var body: some View { VStack(spacing: 20) { Text("🎵 Audio Player with Reverb & Pitch") .font(.title2) HStack { Button("Prepare") { audioManager.prepare() } Button("Play") { audioManager.play() } .padding() .background(Color.green) .foregroundColor(.white) .cornerRadius(10) Button("Pause") { audioManager.pause() } .padding() .background(Color.red) .foregroundColor(.white) .cornerRadius(10) } VStack { Text("Pitch: \(Int(pitch)) cents") Slider(value: $pitch, in: -2400...2400, step: 100) { _ in audioManager.setPitch(pitch) } } VStack { Text("Reverb Mix: \(Int(reverb))%") Slider(value: $reverb, in: 0...100, step: 1) { _ in audioManager.setReverbMix(reverb) } } } .padding() } }

{ "aps": { "content-available": 1 }, "audio_file_name": "ding.caf", "audio_url": "https://example.com/audio.mp3" } When the app is in the background or killed, it receives a remote APNs push. The data format is roughly as shown above. How can I play the MP3 audio file at the specified "audio_url"? The user does not need to interact with the device when receiving the APNs. How can I play the audio file immediately after receiving it?

Hi all, I've developed an audio DSP application in C++ using AudioToolbox and CoreAudio on MacOS 14.4.1 with Xcode 15. I use an AudioQueue for input and another for output. This works great. I'm now adding real-time audio analysis eg spectral analysis. I want this to run independently of my audio processing so it can not interfere with audio playback. Taps on AudioQueues seem to be a good way of doing this... Since the analytics won't modify the audio data, I am using a Siphon Tap by setting the AudioQueueProcessingTapFlags to kAudioQueueProcessingTap_PreEffects | kAudioQueueProcessingTap_Siphon; This works fine on my output queue. However, on my input queue the Tap callback is called once and then a EXC_BAD_ACCESS occurs - screen shot below. NB: I believe that a callback should only call AudioQueueProcessingTapGetSourceAudio when not using a Siphon, so I don't call it. Relevant code: AudioQueueProcessingTapCallback tap_callback) { // Makes an audio tap for a queue void * tap_data_ptr = NULL; AudioQueueProcessingTapFlags tap_flags = kAudioQueueProcessingTap_PostEffects | kAudioQueueProcessingTap_Siphon; uint32_t max_frames = 0; AudioStreamBasicDescription asbd; AudioQueueProcessingTapRef tap_ref; OSStatus status = AudioQueueProcessingTapNew(queue_ref, tap_callback, tap_data_ptr, tap_flags, &max_frames, &asbd, &tap_ref); if (status != noErr) printf("Error while making Tap\n"); else printf("Successfully made tap\n"); } void tapper(void * tap_data, AudioQueueProcessingTapRef tap_ref, uint32_t number_of_frames_in, AudioTimeStamp * ts_ptr, AudioQueueProcessingTapFlags * tap_flags_ptr, uint32_t * number_of_frames_out_ptr, AudioBufferList * buf_list) { // Callback function for audio queue tap printf("Tap callback"); }``` Image of exception stack provided by Xcode: ![]("https://developer.apple.com/forums/content/attachment/27479e8d-a118-459b-aa2d-7e30528910e3" "title=Screenshot 2025-06-14 at 1.29.14 PM.png;width=932;height=562") What have I missed? Appreciate any help you learned folks may be able to provide. Best, Geoff.