I've been wondering if there is a way to modify or even disable tones for indicating channel states. The behaviour regarding tones seems like a black box with little documentation. During migration to Apple's PT Framework we've noticed that there are few scenarios where a tone is played which doesn't match certain certifications. For example; moving from a channel to another produces a tone which would fail a test case. I understand the reasoning fully, as it marks that the channel is ready to transmit or receive, but this doesn't mirror the behaviour of TETRA which would be wanted in this case. I'm also wondering if there would be any way to directly communicate feedback regarding PT Framework?

[Note: this issue was happening on a main testing device, and after testing the same code on other devices, this issue is only happening on 1 out of 4 devices] We are successfully getting a MusicCatalogResourceResponse for every song ID where we make the MusicCatalogResourceRequest. We are able to display the song title, artist name, and album artwork for each Song in the response. However - when we go to play the song, there are some songs that play, and several songs that do not play. For the songs that don't play, the console shows “Failed to prepareToPlay error=<MPMusicPlayerControllerErrorDomain.6 "Failed to prepare to play" {}>” let musicPlayer = ApplicationMusicPlayer.shared func playSong(_ song: Song) { musicPlayer.queue = [song] Task { try await musicPlayer.prepareToPlay() try await musicPlayer.play() } Is there anything else we can investigate about what may be causing specific song IDs not to play on this specific device? Even if we remove line 6 musicPlayer.prepareToPlay() we still see the same console error when running playSong with the Songs that don't work. It is always the same song IDs that we can play and always the same song IDs that we cannot get to play, even trying them across different projects with different bundle identifiers. We can tap to play a song that works, and it starts playing immediately. Then tap a song that doesn't work, and nothing happens. Then back to a song that works. It's consistent which songs succeed and fail on this device. Perhaps there is an issue specific to this very iPad when it comes to certain specific songs, but we'd like to be confident that an app relying on MusicKit will be able to play songs that have been successfully loaded with a MusicCatalogResourceResponse. Thanks for any help or suggestions about what we may be able to investigate further on the device or what we should consider when launching an app that expects anyone with Apple Music to be able to listen to any of the songs loaded by the app. Specific iPad details: iPad Pro (12.9-inch) (6th generation) running iPadOS 26.4 Beta Two of the song IDs that won't play on this iPad (even though we can access and display their album artwork and all other information): 943204000 and 1441164805

using iOS 26.2; Airpods 4 Long press stem to launch Siri Speak "Record Voice Memo" -> Recording starts Recording in progress... Long press stem to launch Siri -> Nothing happens. To stop recording need use phone. is this intended behaviour? i would like to be able to stop recording with Siri I am able to launch Siri from phone while recording, but point is to keep phone in pocket and start/stop recordings only via Airpods.

In my app I use AVAssetReaderTrackOutput to extract PCM audio from a user-provided video or audio file and display it as a waveform. Recently a user reported that the waveform is not in sync with his video, and after receiving the video I noticed that the waveform is in fact double as long as the video duration, i.e. it shows the audio in slow-motion, so to speak. Until now I was using CMFormatDescription.audioStreamBasicDescription.mSampleRate which for this particular user video returns 22'050. But in this case it seems that this value is wrong... because the audio file has two audio channels with different sample rates, as returned by CMFormatDescription.audioFormatList.map({ $0.mASBD.mSampleRate }) The first channel has a sample rate of 44'100, the second one 22'050. If I use the first sample rate, the waveform is perfectly in sync with the video. The problem is given by the fact that the ratio between the audio data length and the sample rate multiplied by the audio duration is 8, double the ratio for the first audio file (4). In the code below this ratio is given by Double(length) / (sampleRate * asset.duration.seconds) When commenting out the line with the sampleRate variable definition in the code below and uncommenting the following line, the ratios for both audio files are 4, which is the expected result. I would expect audioStreamBasicDescription to return the correct sample rate, i.e. the one used by AVAssetReaderTrackOutput, which (I think) somehow merges the stereo tracks. The documentation is sparse, and in particular it’s not documented whether the lower or higher sample rate is used; in this case, it seems like the higher one is used, but audioStreamBasicDescription for some reason returns the lower one. Does anybody know why this is the case or how I should extract the sample rate of the produced PCM audio data? Should I always take the higher one? I created FB19620455. let openPanel = NSOpenPanel() openPanel.allowedContentTypes = [.audiovisualContent] openPanel.runModal() let url = openPanel.urls[0] let asset = AVURLAsset(url: url) let assetTrack = asset.tracks(withMediaType: .audio)[0] let assetReader = try! AVAssetReader(asset: asset) let readerOutput = AVAssetReaderTrackOutput(track: assetTrack, outputSettings: [AVFormatIDKey: Int(kAudioFormatLinearPCM), AVLinearPCMBitDepthKey: 16, AVLinearPCMIsBigEndianKey: false, AVLinearPCMIsFloatKey: false, AVLinearPCMIsNonInterleaved: false]) readerOutput.alwaysCopiesSampleData = false assetReader.add(readerOutput) let formatDescriptions = assetTrack.formatDescriptions as! [CMFormatDescription] let sampleRate = formatDescriptions[0].audioStreamBasicDescription!.mSampleRate //let sampleRate = formatDescriptions[0].audioFormatList.map({ $0.mASBD.mSampleRate }).max()! print(formatDescriptions[0].audioStreamBasicDescription!.mSampleRate) print(formatDescriptions[0].audioFormatList.map({ $0.mASBD.mSampleRate })) if !assetReader.startReading() { preconditionFailure() } var length = 0 while assetReader.status == .reading { guard let sampleBuffer = readerOutput.copyNextSampleBuffer(), let blockBuffer = sampleBuffer.dataBuffer else { break } length += blockBuffer.dataLength } print(Double(length) / (sampleRate * asset.duration.seconds))

I'm writing a simple app for iOS and I'd like to be able to do some text to speech in it. I have a basic audio manager class with a "speak" function: import Foundation import AVFoundation class AudioManager { static let shared = AudioManager() var audioPlayer: AVAudioPlayer? var isPlaying: Bool { return audioPlayer?.isPlaying ?? false } var playbackPosition: TimeInterval = 0 func playSound(named name: String) { guard let url = Bundle.main.url(forResource: name, withExtension: "mp3") else { print("Sound file not found") return } do { if audioPlayer == nil || !isPlaying { audioPlayer = try AVAudioPlayer(contentsOf: url) audioPlayer?.currentTime = playbackPosition audioPlayer?.prepareToPlay() audioPlayer?.play() } else { print("Sound is already playing") } } catch { print("Error playing sound: \(error.localizedDescription)") } } func stopSound() { if let player = audioPlayer { playbackPosition = player.currentTime player.stop() } } func speak(text: String) { let synthesizer = AVSpeechSynthesizer() let utterance = AVSpeechUtterance(string: text) utterance.voice = AVSpeechSynthesisVoice(language: "en-GB") synthesizer.speak(utterance) } } And my app shows text in a ScrollView: ScrollView { Text(self.description) .padding() .foregroundColor(.black) .font(.headline) .background(Color.gray.opacity(0)) }.onAppear { AudioManager.shared.speak(text: self.description) } However, the text doesn't get read out (in the simulator). I see some output in the console: Error fetching voices: Swift.DecodingError.dataCorrupted(Swift.DecodingError.Context(codingPath: [], debugDescription: "Invalid container metadata for _UnkeyedDecodingContainer, found keyedGraphEncodingNodeID", underlyingError: nil)). Using fallback voices. I'm probably doing something wrong here, but not sure what.

Hello! I've two mics connected to a USB-hub. The USB-hub is then connected to my iPad. Both mics are part of the audio session's list of available inputs. The problem is that regardless of which mic I select in my app (using setPreferredInput() on the audio session), the audio keeps coming from the mic that was last connected to the USB-hub. Anyone that knows if this is a limitation in iPadOS/iOS?

I was trying to set custom audio output device for a generated audio on macCatalyst. While using let status = AudioUnitSetProperty(outputUnit, kAudioOutputUnitProperty_CurrentDevice, kAudioUnitScope_Global, 0, &outputDeviceID, UInt32(MemoryLayout.size)) kAudioOutputUnitProperty_CurrentDevice is invalid, and status = -10879, indicating an error. STEPS TO REPRODUCE Set Run Destination to MacOS and run the program. "AudioUnitSetProperty: 0" should be printed, indicating it works fine. Set Run Destination to Mac Catalyst and run the program. "Error setting output device: -10879" should be printed, indicating an error.

Hello. My team and I think we have an issue where our app is asked to gracefully shutdown with a following SIGTERM. As we’ve learned, this is normally not an issue. However, it seems to also be happening while our app (an audio streamer) is actively playing in the background. From our perspective, starting playback is indicating strong user intent. We understand that there can be extreme circumstances where the background audio needs to be killed, but should it be considered part of normal operation? We hope that’s not the case. All we see in the logs is the graceful shutdown request. We can say with high certainty that it’s happening though, as we know that playback is running within 0.5 seconds of the crash, without any other tracked user interaction. Can you verify if this is intended behavior, and if there’s something we can do about it from our end. From our logs it doesn’t look to be related to either memory usage within the app, or the system as a whole. Best, John

I am developing an app with transcription and I am exploring ways to improve the transcription from the SpeechAnalyzer/Transcriber for technical terms. SFSpeech... recognition had the capability of being augmented by contextualStrings. Does something similar exist for SpeechAnalyzer/Transcriber? If so please point me towards the documentation and any sample code that may exist for this. If there are other options, please let me know.

Hey folks, I'm running into an odd issue suddenly with an app that had a working MusicKit integration before. I'm using ApplicationMusicPlayer to play Apple Music albums and songs. I'm testing on a physical device, signed in to Apple ID, and with a valid subscription. Apple Music via the first-party app works entirely fine on this device. Attempting to play back any content at all gives the log: <ICUserIdentityStoreACAccountBackend: 0x1070bf3e0> Failed to initialize primary apple account, error=Error Domain=ICError Code=-7013 "Client is not entitled to access account store" UserInfo={NSDebugDescription=Client is not entitled to access account store} [ICUserIdentityStore] - initializing account histories with activeAccountDSID = nil, activeLockerAccountDSID = nil, timestamp = 14605951908 [ICUserIdentityStore] Failed to fetch local store account with error: Error Domain=ICError Code=-7013 "Client is not entitled to access account store" UserInfo={NSDebugDescription=Client is not entitled to access account store}. The album artwork, track names, etc, all appear in the control center playback controls, but the music doesn't play. Trying to trigger playback with control center just results in it skipping to the next track, which doesn't play either. This exact code used to work. I have the MusicKit service selected in Apple Connect. Since this isn't entitlement-based, I'm not sure how else to check that I'm set up correctly. I've tried deleting/reinstalling the app, restarting the device, cleaning/rebuilding, and deleting DerivedData, to no avail. Any help? Running Xcode 16.4 (16F6), testing on iOS 18.5 (22F76)

I have a question regarding the behavior of AVAudioSession.sharedInstance().outputVolume. Observed behavior: When the app is in the foreground, I read audioSession.outputVolume (for example, 0.1). The app is then moved to the background. While the app is in the background, the user changes the system volume using the hardware buttons (for example, to 0.5). When the app returns to the foreground, audioSession.outputVolume still reports the previous value (0.1). From my testing, outputVolume only seems to update when the system volume is changed while the app is in the foreground. Volume changes made while the app is in the background are not reflected when the app returns to the foreground. Questions: According to Apple’s documentation for AVAudioSession.outputVolume: “The systemwide output volume set by the user.” https://developer.apple.com/documentation/avfaudio/avaudiosession/outputvolume However, based on our testing on iOS 18.6.2 and iOS 18.1, the observed behavior seems to differ from this description. Questions: The documentation states that outputVolume represents the system-wide volume set by the user. In our testing, the value does not reflect volume changes made while the app is in the background and only updates when the app is in the foreground.Is this the expected behavior of AVAudioSession.outputVolume? Is there any other recommended way in Swift to retrieve the current system volume that reflects user changes made both while the app is in the foreground and while it is in the background? Any clarification on the intended behavior or recommended handling would be greatly appreciated.

Is there any feasible way to get a Core Audio device's system effect status (Voice Isolation, Wide Spectrum)? AVCaptureDevice provides convenience properties for system effects for video devices. I need to get this status for Core Audio input devices.

Description: I have identified a specific issue when recording acoustic guitar and other instruments on the iPhone 17 Pro Max using native applications (Voice Memos, Camera). The recordings contain an unnatural metallic resonance (ringing artifacts) that should not be present. Testing and Methodology: Hardware Verification: Initially, I suspected a hardware defect in the audio chip or microphone. However, extensive testing with third-party software suggests this is likely a software-level issue. AudioShare Test: I conducted a test using the AudioShare app in "Measurement Mode" (which bypasses standard iOS system-wide audio processing). In this mode, the audio remains perfectly clean, and the metallic ringing disappears entirely. Conclusion: The issue is rooted in the DSP (Digital Signal Processing) algorithms that iOS applies for noise suppression or voice enhancement. These algorithms appear to misinterpret the high-frequency overtones of acoustic instruments as background noise and attempt to "filter" them, resulting in audible digital artifacts. Comparison Results: This issue has not been observed on devices from other brands or on older iPhone models (preliminary tests suggest older versions handle this better). Notably, the problem persists even in GarageBand, as the app still utilizes certain system-level processing layers. Proposed Solution: I suggest adding a "Raw Audio" or "Instrument Mode" toggle within the Microphone/Audio settings for native apps. This mode should disable aggressive DSP processing, similar to how the AVAudioSession.Mode.measurement works in specialized apps. Attachments: I am attaching 4 archives, including a final "Measurement Mode" folder with comparative samples (Measurement Mode vs. Standard Mode). The artifacts are most prominent when monitored through headphones.

Hi, our CourAudio server plugin utilizes the SystemConfiguration.framework to store and restore specific shared system wide settings. While our application can authenticate to utilize the SystemConfiguration.framework to gain write access to the shared configuration settings the CoreAudio server plugin obviously can't have any user interaction and therefor does not authenticate. Is it possible to authenticate the CoreAudio server plugin to gain write permissions? Are there any entitlements or other means that would allow this? Thanks!

Hi everyone, I'm running into an issue with AVAudioRecorder when handling interruptions such as phone calls or alarms. Problem: When the app is recording audio and an interruption occurs: I handle the interruption with audioRecorder?.pause() inside AVAudioSession.interruptionNotification (on .began). On .ended, I check for .shouldResume and call audioRecorder?.record() again. The recorder resumes successfully, but only the audio recorded after the interruption is saved. The audio recorded before the interruption is lost, even though I'm using the same file URL and not recreating the recorder. Repro: Start a recording with AVAudioRecorder Simulate a system interruption (e.g., incoming call) Resume recording after the interruption Stop and inspect the output audio file Expected: Full audio (before and after interruption) should be saved. Actual: Only the audio after interruption is saved; the earlier part is missing Notes: According to the documentation, calling .record() after .pause() should resume recording into the same file. I confirmed that the file URL does not change, and I do not recreate the recorder instance. No error is thrown by the system during this process. This behavior happens consistently when the app is interrupted and resumed. Question: Is this a known issue? Is there a recommended workaround for preserving the full recording when interruptions happen? Thanks in advance!

I’m using the shared instance of AVAudioSession. After activating it with .setActive(true), I observe the outputVolume, and it correctly reports the device’s volume. However, after deactivating the session using .setActive(false), changing the volume, and then reactivating it again, the outputVolume returns the previous volume (before deactivation), not the current device volume. The correct volume is only reported after the user manually changes it again using physical buttons or Control Center, which triggers the observer. What I need is a way to retrieve the actual current device volume immediately after reactivating the audio session, even on the second and subsequent activations. Disabling and re-enabling the audio session is essential to how my application functions. I’ve tested this behavior with my colleagues, and the issue is consistently reproducible on iOS 18.0.1, iOS 18.1, iOS 18.3, iOS 18.5 and iOS 18.6.2. On devices running iOS 17.6.1 and iOS 16.0.3, outputVolume correctly reflects the current volume immediately after calling .setActive(true) multiple times.

I'm working on adding CarPlay support to an audio app and am running into an issue. Occasionally, when a user opens the app from CarPlay while the main app scene is either not connected or is currently in the background, I will receive an error when attempting to activate the audio session. The code below mimics my setup: do { try AVAudioSession.sharedInstance().setCategory(.playback, mode: .spokenAudio) try AVAudioSession.sharedInstance().setActive(true) } catch { print(error) // NSOSStatusErrorDomain - 560557684: Session activation failed } That error code maps to AVAudioSession.ErrorCode.cannotInterruptOthers. Once in this state, all subsequent attempts to play different pieces of content will fail. However, things will start working normally if the user opens the app on their phone and tries again from CarPlay (while the app is in the foreground on their phone). I'm not sure why it would behave this way and want to note that I do have the audio background mode capability enabled. Has anyone else encountered this? Are there any workarounds or changes I could make to prevent this from happening?

Hello, We are developing a real-time speech recognition application and are utilizing AVAudioEngine with voice processing enabled on the input node. However, we have observed that enabling this mode interferes with the built-in iOS screen recording feature - specifically, the recorded video does not capture any audio when this mode is active. Since we want users to be able to record their experience within our app, this issue significantly impacts our functionality. Is there a known workaround or recommended approach to ensure that both voice processing and screen recording can function simultaneously? Any guidance would be greatly appreciated. Thank you!

Please include the line below in follow-up emails for this request. Case-ID: 11089799 When using AVSpeechUtterance and setting it to play in Mandarin, if Siri is set to Cantonese on iOS 18, it will be played in Cantonese. There is no such issue on iOS 17 and 16. 1.let utterance = AVSpeechUtterance(string: textView.text) let voice = AVSpeechSynthesisVoice(language: "zh-CN") utterance.voice = voice 2.In the phone settings, Siri is set to Cantonese

Hello, I have a CarPlay Navigation app and utilize the AVSpeechSynthesizer to speak directions to a user. Everything works great on my CarPlay simulator as well as when plugged into my GMC truck. However, I found out yesterday that one of my users with a Ford truck the audio would cut in an out. After much troubleshooting, I was able to replicate this on my own truck when using Bluetooth to connect to CarPlay. My user was also utilizing Bluetooth. Has anyone else experienced this? Is there a fix to the problem? import SwiftUI import AVFoundation class TextToSpeechService: NSObject, ObservableObject, AVSpeechSynthesizerDelegate { private var speechSynthesizer = AVSpeechSynthesizer() static let shared = TextToSpeechService() override init() { super.init() speechSynthesizer.delegate = self } func configureAudioSession() { speechSynthesizer.delegate = self do { try AVAudioSession.sharedInstance().setCategory(.playback, mode: .voicePrompt, options: [.mixWithOthers, .allowBluetooth]) } catch { print("Failed to set audio session category: \(error.localizedDescription)") } } func speak(_ text: String) { Task(priority: .high) { let speechUtterance = AVSpeechUtterance(string: text) speechUtterance.voice = AVSpeechSynthesisVoice(language: AVSpeechSynthesisVoice.currentLanguageCode()) try AVAudioSession.sharedInstance().setActive(true, options: .notifyOthersOnDeactivation) speechSynthesizer.speak(speechUtterance) } } func speechSynthesizer(_ synthesizer: AVSpeechSynthesizer, didFinish utterance: AVSpeechUtterance) { Task { stopSpeech() try AVAudioSession.sharedInstance().setActive(false) } } func stopSpeech() { speechSynthesizer.stopSpeaking(at: .immediate) } }