I created a distribution certificate for my app release build and have manually loaded this cert (link to xcode image at the bottom of this paragraph). All things look good until I build the app and I get the following error. I'm first pasting the image of my project and then the error information. [https://madshot.net/10c6e510875e.png) Could not launch “Madshot360” Domain: IDELaunchErrorDomain Code: 20 Recovery Suggestion: Runningboard has returned error 5. Please check the system logs for the underlying cause of the error. User Info: { DVTErrorCreationDateKey = "2025-06-10 19:58:02 +0000"; DVTRadarComponentKey = 968756; IDERunOperationFailingWorker = IDELaunchServicesLauncher; } The operation couldn’t be completed. Launch failed. Domain: RBSRequestErrorDomain Code: 5 Failure Reason: Launch failed. Launchd job spawn failed Domain: NSPOSIXErrorDomain Code: 153 Event Metadata: com.apple.dt.IDERunOperationWorkerFinished : { "device_identifier" = "00008112-0004052C22D8A01E"; "device_model" = "Mac14,15"; "device_osBuild" = "15.5 (24F74)"; "device_platform" = "com.apple.platform.macosx"; "device_thinningType" = "Mac14,15"; "dvt_coredevice_version" = "443.19"; "dvt_coresimulator_version" = "1010.10"; "dvt_mobiledevice_version" = "1784.120.3"; "launchSession_schemeCommand" = Run; "launchSession_state" = 1; "launchSession_targetArch" = arm64; "operation_duration_ms" = 235; "operation_errorCode" = 20; "operation_errorDomain" = IDELaunchErrorDomain; "operation_errorWorker" = IDELaunchServicesLauncher; "operation_name" = IDERunOperationWorkerGroup; "param_debugger_attachToExtensions" = 0; "param_debugger_attachToXPC" = 1; "param_debugger_type" = 3; "param_destination_isProxy" = 0; "param_destination_platform" = "com.apple.platform.macosx"; "param_diag_113575882_enable" = 0; "param_diag_MainThreadChecker_stopOnIssue" = 0; "param_diag_MallocStackLogging_enableDuringAttach" = 0; "param_diag_MallocStackLogging_enableForXPC" = 1; "param_diag_allowLocationSimulation" = 1; "param_diag_checker_tpc_enable" = 1; "param_diag_gpu_frameCapture_enable" = 0; "param_diag_gpu_shaderValidation_enable" = 0; "param_diag_gpu_validation_enable" = 0; "param_diag_guardMalloc_enable" = 0; "param_diag_memoryGraphOnResourceException" = 0; "param_diag_mtc_enable" = 1; "param_diag_queueDebugging_enable" = 1; "param_diag_runtimeProfile_generate" = 0; "param_diag_sanitizer_asan_enable" = 0; "param_diag_sanitizer_tsan_enable" = 0; "param_diag_sanitizer_tsan_stopOnIssue" = 0; "param_diag_sanitizer_ubsan_enable" = 0; "param_diag_sanitizer_ubsan_stopOnIssue" = 0; "param_diag_showNonLocalizedStrings" = 0; "param_diag_viewDebugging_enabled" = 1; "param_diag_viewDebugging_insertDylibOnLaunch" = 1; "param_install_style" = 2; "param_launcher_UID" = 2; "param_launcher_allowDeviceSensorReplayData" = 0; "param_launcher_kind" = 0; "param_launcher_style" = 99; "param_launcher_substyle" = 0; "param_runnable_appExtensionHostRunMode" = 0; "param_runnable_productType" = "com.apple.product-type.application"; "param_structuredConsoleMode" = 1; "param_testing_launchedForTesting" = 0; "param_testing_suppressSimulatorApp" = 0; "param_testing_usingCLI" = 0; "sdk_canonicalName" = "macosx15.4"; "sdk_osVersion" = "15.4"; "sdk_variant" = macos; } System Information macOS Version 15.5 (Build 24F74) Xcode 16.3 (23785) (Build 16E140) Timestamp: 2025-06-10T12:58:02-07:00

I have recently enrolled in the Apple Developer to get my app notarized, and submitted an Archive for notarization, but it is taking forever. It has almost been a whole day, but the status is still in progress, whereas I have seen other developers say that the same takes 10-15 mins to an hour for them. Am I doing anything wrong? Please guide me through this.

Hi Apple Developer Community, I'm experiencing an issue with Family Controls entitlements for my iOS app that I'd like to discuss and see if others have encountered similar problems. Background: My app (BrightStart) uses Family Controls to help users build healthy morning routines by temporarily blocking distracting apps until they complete a sunlight exposure session. The core functionality relies on automatic time-based blocking (e.g., block social media apps from 6-8am daily). The Problem: I have Family Controls working perfectly in development builds, but I'm blocked from distributing via TestFlight due to entitlement issues with my Device Activity Monitor extension. Technical Details: Main app bundle ID: app.brightstart.app ✅ Has both "Family Controls (Development)" and "Family Controls (Distribution)" options available Extension bundle ID: app.brightstart.app.BrightStartMonitorExtension ❌ Only shows "Family Controls (Development)" - no Distribution option Error when archiving for TestFlight: ❌ Provisioning profile failed qualification Profile doesn't support Family Controls (Development). Family Controls (Development) feature is for development only. Please use Family Controls (Distribution) for distribution. Impact: Cannot upload to TestFlight for beta testing Native FamilyActivityPicker falls back to mock UI in distributed builds Automatic scheduled app blocking (via DeviceActivityMonitor) doesn't function in production Questions for the community: Has anyone successfully gotten "Family Controls (Distribution)" enabled for a Device Activity Monitor extension? Is this a known limitation, or should I expect this option to be available? Are there alternative approaches for time-based automatic app blocking that work in distribution builds? Should I contact Apple Support directly about enabling this entitlement for the extension? Btw, Cursor wrote this summary above, so it could be just hallucinating the issue? Would really appreciate anyone's thoughts here.

Hi, I have an app built in Unity that I am trying to sign an notarize for distribution. I can successfully codesign the app and it runs properly. But after successfully notarizing the app, the app stops opening. My process is as follows: # codesign the app. omitting "--deep" "--option runtime" or both will result in notarization failing codesign --force --deep --verify --verbose --option runtime --sign "Developer ID Application: ORG NAME (ZZZZZZZZZ)" path/to/app.app # create notarization submission zip /usr/bin/ditto -c -k --keepParent path/to/app.app path/to/app.zip # submit for notarization xcrun notarytool submit --wait path/to/app.zip -v --apple-id apple@id.com --password "aaaa-aaaa-aaaa-aaaa" --team-id "ZZZZZZZZZ" Notarization seems to succeed. Running: spctl -a -vvv -t install path/to/app.app -returns: path/to/app.app: accepted source=Notarized Developer ID origin=Developer ID Application: JOHN DOE (ZZZZZZZZZ) The Problem: Before code signature, the app runs normally After code signature, the app runs normally After notarization, the app hangs indefinitely on opening. It stays in the Dock until force quit. The app does not create its main window. There are no Gatekeeper warnings or pop-up windows. Additional Information: The second time I attempt to open the application I get a pop-up warning me that the app was force-quit while opening windows. This happens whether or not I have used xcrun stapler to staple the notarization to the app This happens whether I run the app from the terminal, by double clicking on the .app package, or by running the Unix Executable within Contents/MacOS/ Any idea how I can debug this and figure out what's going wrong? Any help would be greatly appreciated.

I have attempted all upgrades: updated xcode to 16.4 downloaded and installed Command Line Tools for Xcode 16.4 I have no issues with the installs, however when I run: > xcrun notarytool --version 1.0.0 (38) I need to be running v2.x How can I resolve this issue.

I have been notarizing the same program for 3 years now and it's usually completed in minutes. I have not changed anything on my end, is there a reason it's taking 24+ hours all of a sudden? I have seen the posts regarding this issue for new applications where it has to "learn", but I have been notarizing the same apps for 3 years now.

I am submitting .dmg notarization requests from Sequoia 15.7.3 using xcrun submit. My developer certificate was created in the last two weeks and is valid. I have had some successful notarizations already so I know that my configuration is correct. However, for the last 48 hours all of my submissions are stuck at 'in progress'. Is there an issue with the notarization service on Apple's side?

Hi everyone, My app notarization has been stuck in the “In Progress” state for the past 4 days. Here are the details: createdDate: 2025-10-12T07:56:46.228Z id: 8f8c9a33-1c72-489e-a189-74c797a12fbc name: DevScribe.zip status: In Progress I checked the Apple System Status page and noticed that the Developer Notarization service has been showing an outage since October 8th. Could this ongoing outage be the reason my notarization is stuck? Is anyone else experiencing the same issue? Any guidance or workaround would be greatly appreciated.

*** Error: ERROR: [ContentDelivery.Uploader] Validation failed (409) Invalid Provisioning Profile. The provisioning profile included in the com.baiyun-shuniu.scss bundle [Payload/HBuilder.app] is invalid. [Missing code-signing certificate]. A distribution provisioning profile should be used when uploading apps to App Store Connect. (ID: e21c7a63-520f-49c5-8298-9afa3aa14dd5) 2025-05-13 09:23:20.382 INFO: [ContentDelivery.Uploader]

Hey, Just recently I realized something I have been overlooking in my build pipelines. I thought that by adding the the "hardened runtime", I disable 3rd-party library injection (I do not have the disable-library-validation entitlement added). However, I was using some checks on my code and I noticed that the "library validation" code signature check fails on my applications (e.g. adding the .libraryValidation requirement via the LightweightCodeRequirements framework) - with codesign -dvvvv /path/to/app I can check it doesn't have the CS_REQUIRE_LV flag: [...] CodeDirectory v=20500 size=937 flags=0x10000(runtime) hashes=18+7 location=embedded [...] then I used in Xcode the "Other Code Signing Flags" setting and added the -o library option, which added the flag: [...] CodeDirectory v=20500 size=937 flags=0x12000(library-validation,runtime) hashes=18+7 location=embedded [...] Is this flag something I should be explicitly setting? Because I was under the impression enabling hardened runtime would be enough. Popular Developer ID distributed applications (e.g. Google Chrome, Parallels Desktop, Slack) all have this flag set.

I added a new device and it's not recognizing the device model. This causes a message saying "Unable to verify" when signing an app. Has anyone else encountered this issue? This only happens with this one device, not others.

I’m trying to notarize an Electron app for distribution outside the Mac App Store, but every submission is rejected with error 7000. Team Details: Team ID: P3HATASMP9 Organization: Rose Ai Labs, Inc. Role: Account Holder Apple Developer Program: Active membership Certificate: Type: Developer ID Application Identity: “Developer ID Application: Rose Ai Labs, Inc. (P3HATASMP9)” Status: Valid in Keychain Access with full certificate chain App Details: Platform: macOS (Electron) Hardened runtime: Enabled Code signing: Successful (codesign -v passes) Submission History (all rejected with same error): Jan 20, 2026: d2f5e812-d443-4858-895e-ca9828f65d6b Jan 20, 2026: 4864e851-99d4-49df-87b8-22a6b280f4fc Jan 21, 2026: 69b177bd-5f08-4363-a2bb-1d286dd9f047 Jan 21, 2026: a181071b-e874-4794-90f3-c172b112900e Jan 21, 2026: ae3ec87f-60da-4826-91df-a247cd4fd46f Jan 21, 2026: b7165e2f-19a8-4d4a-9e00-21e85550ec8b Jan 24, 2026: 2b83d46d-6606-450f-9ffe-cbfa0f0bf179 Jan 27, 2026: ed8ba49c-b24f-422b-9271-44dff805fb61 Error from notarytool log: status: Rejected statusCode: 7000 statusSummary: Team is not yet configured for notarization. Please contact Developer Programs Support at developer.apple.com under the topic Development and Technical / Other Development or Technical Questions. What I’ve verified: Developer ID certificate is valid and trusted Apple Worldwide Developer Relations Certification Authority chain is complete App is properly code-signed with hardened runtime Using notarytool with valid credentials (submission uploads successfully) Account Holder role with full permissions Existing support case: 102808512705 I’ve had this issue for over a week with no resolution. The error message says “Team is not yet configured for notarization” which suggests something needs to be enabled on Apple’s side. Has anyone encountered this and found a resolution?

Hi everyone, I'm trying to add the Side Button Access entitlement to my voice-based conversational app following the documentation, but I'm unable to find it in Xcode. Steps I followed: Selected my app target in Xcode project navigator Went to the Signing & Capabilities tab Clicked the + Capability button Searched for "Side Button Access" Problem: The "Side Button Access" option does not appear in the capabilities list at all. Environment: I'm developing and testing in Japan (where this feature should be available) Xcode version: Xcode 26.2 beta 3 iOS deployment target: iOS 26.2 Questions: Is there any pre-registration or special approval process required from Apple before this entitlement becomes available? Are there any additional requirements or prerequisites I need to meet? Is this feature already available, or is it still in a limited beta phase? Any guidance would be greatly appreciated. Thank you!

I submitted a Mac application for a safari ad blocker extension about 15 hours ago and it's still in progress. Is it normal for notarization to take this long? It's my first time submitting something for notarization so maybe that's why it's taking longer than expected? ID: 8BDB3D5E-3A42-469F-9479-AC76229C6BB5

We are developing an application using .NET Xamarin.mac. While notarization after signing the package the error was thrown which was attached in a file Then created an simple Xamarin.mac app , in notarization process the same error was thrown. Provide an solution to resolve the issue while notarization. We have tried to codesignin the .app file but below error was thrown unable to build chain to self-signed root for signer "Developer ID Application: SFSecure.app: errSecInternalComponent Notarization error

Hello, I sent this in as a feedback several weeks ago about watchOS 26.2 beta 2 but since the issue is still active now that watchOS 26.2 is in production I'm reposting here for the community. I would also like to submit a DTS about this issue but honestly don't know the best way to go about it and would appreciate advice about that. There seems to be an issue with VPP distribution for our app on watchOS 26.2. When our watchOS companion app is launched after being installed through VPP to a supervised iPhone, it encounters a dyld error before main() or any application code is even called. The same app launches correctly in every other circumstance we could imagine and test: – Installed through VPP on supervised devices running watchOS 26.1. – Installed from the app store (using an apple id) on a supervised iPhone and paired watch running iOS 26.2 / watchOS 26.2. – Installed through Testflight on a supervised iPhone and paired watch running iOS 26.2 / watchOS 26.2. – Installed through the app store on unsupervised devices running watchOS 26.1 and 26.2. This strongly appears to be a VPP signing issue because we even did the following experiment: Install iPhone and Watch apps through the App Store on a supervised device pair running public iOS 26.2 beta 2 / watchOS 26.2 beta 2. Verify that both apps launch successfully. Use an MDM command to install from VPP over the existing installations Verify that the watch app fails to launch (the iOS app is unaffected) My feedback included some crash logs which I won't be reposting publicly here. Any feedback or ideas appreciated.

Command failed: codesign --sign 142DA07B8371F5C9BCE0FFEC6B23CDEB84F48E52 --force --timestamp --options runtime --entitlements /Users/mymac/Desktop/ElectronApp/node_modules/app-builder-lib/node_modules/@electron/osx-sign/entitlements/default.darwin.plist /Users/mymac/Desktop/ElectronApp/dist/mas-arm64/electron.app/Contents/Library/LoginItems/electron Login Helper.app/Contents/MacOS/electron Login Helper /Users/mymac/Desktop/ElectronApp/dist/mas-arm64/electron.app/Contents/Library/LoginItems/electron Login Helper.app/Contents/MacOS/electron Login Helper: replacing existing signature /Users/mymac/Desktop/ElectronApp/dist/mas-arm64/electron.app/Contents/Library/LoginItems/electron Login Helper.app/Contents/MacOS/electron Login Helper: resource fork, Finder information, or similar detritus not allowed failedTask=build stackTrace=Error: Command failed: codesign --sign 142DA07B8371F5C9BCE0FFEC6B23CDEB84F48E52 --force --timestamp --options runtime --entitlements /Users/mymac/Desktop/ElectronApp/node_modules/app-builder-lib/node_modules/@electron/osx-sign/entitlements/default.darwin.plist /Users/mymac/Desktop/ElectronApp/dist/mas-arm64/electron.app/ I'm not entirely sure what's causing this issue. Has anyone else encountered this error while signing their macOS app? I’d really appreciate any guidance or solutions you can share.

Hello Apple Developer Community, I'm experiencing a persistent issue with App Groups configuration for an iOS app extension that I can't resolve despite trying multiple approaches. I hope someone can help identify what I'm missing. Problem Description I'm getting this error when trying to build my iOS App Extension: Provisioning profile "iOS Team Provisioning Profile: com.idlrapp.Spleeft.SpleeftDataSaver" doesn't include the com.apple.developer.app-groups entitlement. My Setup Main App Bundle ID: com.idlrapp.Spleeft Extension Bundle ID: com.idlrapp.Spleeft.SpleeftDataSaver App Group ID: group.com.idlrapp.spleeft.shared Extension Type: Action Extension (Share Sheet) What I've Verified App Group Creation ✅ Created App Group group.com.idlrapp.spleeft.shared in Apple Developer Portal ✅ App Group shows as "Active" in the portal App ID Configuration ✅ Both App IDs (com.idlrapp.Spleeft and com.idlrapp.Spleeft.SpleeftDataSaver) have "App Groups" capability enabled ✅ Both App IDs are configured with the same App Group: group.com.idlrapp.spleeft.shared Entitlements Files Main App (Spleeft.entitlements): <key>com.apple.developer.app-groups</key> <array> <string>group.com.idlrapp.spleeft.shared</string> </array> Extension (SpleeftDataSaver.entitlements): <key>com.apple.developer.app-groups</key> <array> <string>group.com.idlrapp.spleeft.shared</string> </array> Xcode Configuration ✅ Both targets use "Automatically manage signing" ✅ Same Apple Developer Team selected for both ✅ App Groups capability shows correctly in Signing & Capabilities for both targets The Issue When I examine the downloaded .mobileprovision file, I can see it contains: <dict> <key>com.apple.security.application-groups</key> <array> <string>group.com.idlrapp.spleeft.shared</string> </array> <!-- Other entitlements... --> </dict> However, Xcode expects to find: <array> <string>group.com.idlrapp.spleeft.shared</string> </array> What I've Tried Multiple regenerations of provisioning profiles: Deleted all local provisioning profiles Toggled "Automatically manage signing" off/on Downloaded manual profiles from Developer Portal Verified App Group configuration: Double-checked App Group exists and is active Confirmed both App IDs have App Groups capability enabled Verified App Group assignment in both App IDs Entitlements cleanup: Ensured consistent App Group IDs across all files Removed duplicate/conflicting entries Clean builds and cache clearing: Product → Clean Build Folder Derived Data deletion Xcode restart Key Observation The provisioning profile contains com.apple.security.application-groups (which appears to be macOS-style) but Xcode expects com.apple.developer.app-groups (iOS-style) for the App Extension. Questions Is there a known issue with App Groups entitlement generation for iOS App Extensions? Should the provisioning profile contain com.apple.developer.app-groups instead of com.apple.security.application-groups? Is there a way to force regeneration of provisioning profiles with the correct entitlements? Are there additional steps required for App Extensions that differ from main apps? Any guidance would be greatly appreciated. This is blocking our App Extension development and we've exhausted our troubleshooting options. Thank you for your time and assistance.

Hello, I have created multiple Developer ID Application and Developer ID Installer certificates across different Apple OS versions without keeping the Certificate Signing Requests (CSR). As I’m not very experienced with Apple’s system, I made this mistake and now I am unable to create new certificates because I have reached the maximum number of certificates allowed. I develop software based on Electron and have been building and signing my applications with electron-builder, integrating the app signing needed to submit the app to the Apple Store via Transporter. Here is the relevant portion of my package.json build config: "mac": { "appId": "com.nome_app.ext", "type": "distribution", "target": [ "mas" ], "artifactName": "name_app.${ext}", "category": "public.app-category.utilities", "provisioningProfile": "build/prov_prof_mac_name_app.provisionprofile" }, "mas": { "appId": "com.name_app.ravia", "hardenedRuntime": false, "type": "distribution", "gatekeeperAssess": true, "artifactName": "name_app.${ext}", "category": "public.app-category.utilities", "entitlements": "build/entitlements.mas.plist", "extendInfo": { "NSMicrophoneUsageDescription": "This app requires microphone access.", "NSCameraUsageDescription": "This app requires webcam access." }, "entitlementsInherit": "build/entitlements.mas.inherit.plist" } } Currently, I have recreated the Mac Developer Application and Mac Developer Installer certificates, but without valid Developer ID Installer and Developer ID Application certificates, I always get this error during build: `skipped macOS application code signing reason=cannot find valid "Developer ID Application" identity or custom non-Apple code signing certificate, it could cause some undefined behaviour, e.g. macOS localized description not visible, see https://electron.build/code-signing allIdentities= 718241A413826C6A97E2062EAEC155BEF5330CCA "iPhone Distribution: RAVIA SOFTWARE DI VILLANOVA DOMENICO ANTONIO (T9UD6J5HXZ)" (CSSMERR_TP_NOT_TRUSTED) 60B360CCE27FE915799FAE7C8E6A16962F2DE9B0 "3rd Party Mac Developer Installer: RAVIA SOFTWARE DI VILLANOVA DOMENICO ANTONIO (T9UD6J5HXZ)" (CSSMERR_TP_NOT_TRUSTED) 4518A8CE3BAC4F27B09D654DA14F52FBE15A0A85 "3rd Party Mac Developer Application: RAVIA SOFTWARE DI VILLANOVA DOMENICO ANTONIO (T9UD6J5HXZ)" (CSSMERR_TP_NOT_TRUSTED) ... (additional identities with CSSMERR_TP_NOT_TRUSTED) Valid identities only: 718241A413826C6A97E2062EAEC155BEF5330CCA "iPhone Distribution: RAVIA SOFTWARE DI VILLANOVA DOMENICO ANTONIO (T9UD6J5HXZ)" (CSSMERR_TP_NOT_TRUSTED) ... • signing file=dist/mas/Studio Medico Specialistico.app platform=mas type=distribution identityName=3rd Party Mac Developer Application: RAVIA SOFTWARE DI VILLANOVA DOMENICO ANTONIO (T9UD6J5HXZ) identityHash=4518A8CE3BAC4F27B09D654DA14F52FBE15A0A85 provisioningProfile=build/prov_prof_mac_studiomedicospecialistico.provisionprofile • Command failed multiple times: codesign --sign "3rd Party Mac Developer Application: RAVIA SOFTWARE DI VILLANOVA DOMENICO ANTONIO (T9UD6J5HXZ)" --force --timestamp --entitlements build/entitlements.mas.inherit.plist /path/to/app/Contents/Frameworks/Electron Framework.framework/Versions/A/Resources/af.lproj/locale.pak Warning: unable to build chain to self-signed root for signer "3rd Party Mac Developer Application: RAVIA SOFTWARE DI VILLANOVA DOMENICO ANTONIO (T9UD6J5HXZ)" Error: errSecInternalComponent From my understanding, the system cannot find a valid Developer ID Application identity for signing. The existing certificates all show the CSSMERR_TP_NOT_TRUSTED error and the signing command fails with errSecInternalComponent. **I have confirmed that the certificates are installed in my keychain, but they may be missing private keys or not fully trusted. Is there a possibility to reset my Apple Developer account’s Developer ID Application and Developer ID Installer certificates, so I can start fresh and generate new valid certificates? Could you please advise on how to proceed or if there is any way to clear the current certificate limit?** Thank you very much for your help.

Hey Apple Friends, We currently have an enterprise version of our app for debugging and internal distribution. Our release configuration uses our App Store account. However, it appears you cannot add a 'Declared Age Range' to the Enterprise app as a capability making it impossible to debug because we have added the 'Declared Age Range API' locally, but we cannot add it as a capability on the dev portal. Is there any work around for this?