I have a requirement to create a VPN app which only works on Cellular. But I'm facing an issue like when wifi is ON, OS is using wifi interface to route the traffic instead of cellular. I tried some ways like let cellularParams = NWParameters.udp cellularParams.requiredInterfaceType = .cellular But this is not working properly as expected. How can I manually bind to cellular interface in iOS?

Dear Developers, I would like to suggest an optimization for the logic governing the download and installation queue for app updates. Currently, when multiple applications are awaiting updates, the prioritization does not appear to consider the update payload size. My proposal is to implement a logic that prioritizes the download and installation of updates with a smaller delta size (fewer MB) before those with a larger delta. Practical Example: A 1MB update would be processed before a 500MB update, even if their arrival order in the queue was inverted. Potential Benefits: Perceived Speed Optimization (UX): Users would gain access to functional applications more quickly, especially in scenarios with multiple pending updates. Network Efficiency: In limited or intermittent bandwidth scenarios, completing smaller downloads first can reduce the chance of download failures and optimize network resource utilization. Device Resource Management: Frees up temporary storage and processing resources more rapidly for smaller updates. I believe this optimization would bring significant gains in terms of User Experience (UX) and the operational efficiency of the platform. Thank you for your attention and consideration. Sincerely,

I am developing a program on my chip and attempting to establish a connection with the WiFi Aware demo app launched by iOS 26. Currently, I am encountering an issue during the pairing phase. If I am the subscriber of the service and successfully complete the follow-up frame exchange of pairing bootstrapping, I see the PIN code displayed by iOS. Question 1: How should I use this PIN code? Question 2: Subsequently, I need to negotiate keys with iOS through PASN. What should I use as the password for the PASN SAE process? If I am the subscriber of the service and successfully complete the follow-up frame exchange of pairing bootstrapping, I should display the PIN code. Question 3: How do I generate this PIN code? Question 4: Subsequently, I need to negotiate keys with iOS through PASN. What should I use as the password for the PASN SAE process?

I'm facing an issue where if a WiFi network is turned off and back on within a short time frame (2-4 seconds), iOS still shows the device as connected but does not send a new DHCP request. This causes a problem for my network device, which relies on the DHCP request to assign an IP address. Without the request, the device is unable to establish a socket connection properly. Is there any way to force iOS to send a DHCP request immediately when reconnecting to the network in this scenario? Are there any known workarounds or configurations that might help ensure the DHCP process is re-triggered? Any insights would be appreciated. Thanks!

I have few API's written with URLSession. Will they work in Carrier-constrained network / satellite mode ?

Getting -10985 error from urlSession while attempting to make a connection. Not sure why this is happening if anyone is aware please help

Our app supports live streaming (RTSP, RTMP, WebRTC) functionality. After updating to the 18.5 Developer Beta version, we’ve encountered an issue where streaming over LTE is not working for customers using SKT (SK Telecom) as their carrier. Upon investigation, it seems that a similar issue might be occurring with a streaming service app called "SOOP." I would appreciate it if you could share any information regarding this bug. Thank you.

I am trying to intercept localhost connections within NETransparentProxyProvider system extension. As per NENetworkRule documentation If the address is a wildcard address (0.0.0.0 or ::) then the rule will match all destinations except for loopback (127.0.0.1 or ::1). To match loopback traffic set the address to the loopback address. I tried to add NWHostEndpoint *localhostv4 = [NWHostEndpoint endpointWithHostname:@"127.0.0.1" port:@""]; NENetworkRule *localhostv4Rule = [[NENetworkRule alloc] initWithDestinationNetwork:localhostv4 prefix:32 protocol:NENetworkRuleProtocolAny]; in the include network rules. I tried several variations of this rule like port 0, prefix 0 and some others. But the provider disregards the rule and the never receives any traffic going to localhost on any port. Is there any other configuration required to receive localhost traffic in NETransparentProxyProvider?

We are a Layer 3 VPN provider offering a comprehensive SASE (Secure Access Service Edge) solution that includes TLS inspection, threat protection, granular access control, and secure access to private resources. One of the key challenges we face involves TLS inspection. Many mobile applications, especially on iOS, implement certificate pinning, which causes them to fail when TLS inspection is applied. These apps expect connections to be secured with a specific certificate or trusted certificate authority, and inspection disrupts this trust model. On iOS, the current limitation is that the Packet Tunnel Provider extension does not provide visibility into the originating application (i.e., there is no API to obtain the app’s bundle ID or package name associated with a given network connection). Due to this, we are unable to dynamically determine whether TLS inspection should be bypassed for a particular app. While Apple’s Per-App VPN is one possible solution, it introduces a significant drawback: any applications that are excluded from the VPN configuration are entirely outside the VPN tunnel. This means they do not benefit from any of our SASE features — including secure access to internal resources, DNS/web content filtering, or threat detection. This limits the effectiveness of our solution in environments where both inspection and secure access are critical. We would like to understand whether iOS has any current or planned capabilities to associate a network flow (e.g., a 5-tuple: source IP, destination IP, source port, destination port, and protocol) with the originating app. Such a capability would allow us to programmatically identify certificate-pinned apps and selectively disable TLS inspection without excluding them entirely from the VPN, thereby preserving the full set of SASE protections. Is there any guidance or roadmap update from Apple that addresses this use case?

My application (using a nested framework for networking) was working correctly on iPadOS 18, but failed to perform a UDP broadcast operation after upgrading the device to iPadOS 28. The low-level console logs consistently show a "Permission denied" error. Symptoms & Error Message: When attempting to send a UDP broadcast packet using NWConnection (or a similar low-level socket call within the framework), the connection fails immediately with the following error logged in the console: nw_socket_service_writes_block_invoke [C2:1] sendmsg(fd 6, 124 bytes) [13: Permission denied] (Error code 13 corresponds to EACCES). Verification Steps (What I have checked): Multicast Networking Entitlement is Approved and Applied: The necessary entitlement (com.apple.developer.networking.multicast) was granted by Apple. The Provisioning Profile used for signing the Host App Target has been regenerated and explicitly includes "Multicast Networking" capability (see attached screenshot). I confirmed that Entitlements cannot be added directly to the Framework Target, only the Host App Target, which is the expected behavior. Local Network Privacy is Configured: The Host App's Info.plist contains the NSLocalNetworkUsageDescription key with a clear usage string. Crucially, the Local Network Access alert does not reliably appear when the Broadcast function is first called (despite a full reinstall after OS upgrade). Even when Local Network Access is manually enabled in Settings, the Broadcast still fails with EACCES. Code Implementation: The Broadcast is attempted using NWConnection to the host 255.255.255.255 on a specific port. Request: Since all required entitlements and profiles are correct, and the failure is a low-level EACCES on a newly updated OS version, I suspect this may be a regression bug in the iPadOS 28 security sandbox when validating the Multicast Networking Entitlement against a low-level socket call (like sendmsg). Has anyone else encountered this specific Permission denied error on iPadOS 28 with a valid Multicast Entitlement, and is there a known workaround aside from switching to mDNS/Bonjour?

Hi, when I perform an overlay installation via a PKG on macOS for an application containing the NEFilterDataProvider functionality, there is a chance that the entire system network becomes unreachable. Disabling the corresponding Content Filter in "System Settings > Network > Filters" immediately restores network connectivity. This issue does not occur every time, with a frequency of approximately 1 in 20 installation attempts.  The following details may help identify the problem: The Filter.app containing the NEFilterDataProvider resides within the main app's Resources directory, e.g., /Applications/Main.app/Contents/Resources/Filter.app Main.app is installed via a PKG; the issue typically occurs during an overlay installation of Main.app. The NEFilterDataProvider operates as a System Extension. The func handleNewFlow(_ flow: NEFilterFlow) -> NEFilterNewFlowVerdict {} returns .allow. Wireshark packet captures show TCP packets but no UDP packets; TCP handshakes cannot complete. Disabling the corresponding content filter in "System Settings > Network > Filters" restores the network; re-enabling it breaks connectivity again. After waiting for a period, approximately 30-60 minutes, network connectivity can recover automatically. What causes this and how can it be fixed? Any workarounds?

I cannot find in the documentation and samples how exactly the Bloom filter is generated. Is there any code sample for that?

I'm trying to distribute a sandboxed macOS app with a PacketTunnelProvider (system extension) via direct distribution (outside of AppStore). The app and the extension both use the same app group, using the new group.com.XXXX.YYYY format detailed here for 10.15+ https://developer.apple.com/forums/thread/721701 I've also followed the instructions below to get around the quirk of not being able to directly process it via XCode: https://developer.apple.com/forums/thread/737894 I've re-signed with Developer ID certificate, all that is smooth and successfully notarized. However upon running the app I get: "My.app" would like to access data from other apps. Checking ~/Library/Containers ~/Library/Group Containers I see the correct files folders have been created before I select Don't Allow and Allow. My app does not access any files or folders outside of the sandboxed directories. How can I prevent this from happening? In order to diagnose further, how to diagnose exactly which files/folder the app is trying to access that is causing this problem?

I have checked the storage space of my phone. There is still over a hundred gigabytes of space left. An error occurred when the app was checking the network interface status. The error message is as follows:Error : Error Domain=NSPOSIXErrorDomain Code=28 "No space left on device" UserInfo={_NSURLErrorFailingURLSessionTaskErrorKey=LocalDataTask <7DB1CBFD-B9BE-422D-9C9A-78D8FC04DC1B>.<76>, _kCFStreamErrorDomainKey=1, _kCFStreamErrorCodeKey=28, _NSURLErrorRelatedURLSessionTaskErrorKey=( "LocalDataTask <7DB1CBFD-B9BE-422D-9C9A-78D8FC04DC1B>.<76>" ), _NSURLErrorNWPathKey=satisfied (Path is satisfied), interface: pdp_ip0[lte], ipv4, ipv6, dns, expensive, estimated upload: 65536Bps, uses cell}

Configure the App ID in the Apple Developer Portal. In the Network Extensions section, the Packet Tunnel section is not displayed, as shown in the figure below How to proceed with the configuration of App ID. In the Network Extensions section: Display the Packet Tunnel section Our account is a China region account

I'm developing an iOS application in Swift that performs API calls using URLSession.shared. The requests work correctly when the app is in the foreground. However, when the app transitions to the background (for example, when the user switches to another app), the ongoing API calls are either paused or do not complete as expected. What I’ve tried: Using URLSession.shared.dataTask(with:) to initiate the API requests Observing application lifecycle events like applicationDidEnterBackground, but haven't found a reliable solution to allow requests to complete when backgrounded Goal: I want certain API requests to continue running or be allowed to complete even if the app enters the background. Question: What is the correct approach to allow API calls to continue running or complete when the app moves to the background? Should I be using a background URLSessionConfiguration instead of URLSession.shared? If so, how should it be properly configured and used in this scenario?

My personal project is a bit further along however after not being able to get this to work in my app I fell back to a much simpler/proven implementation out there. There is this project on GitHub with a guide that implements a barebones app extension with packet tunneling. I figure this can give us common ground. After changing the bundle and group identifiers to all end with -Caleb and or match up I tried running the app. The app extension does not work whatsoever and seemingly for reasons that are similar to my personal project. If I pull up the console and filter for the subsystem (com.github.kean.vpn-client-caleb.vpn-tunnel) I see the following. First you see installd installing it 0x16ba5f000 -[MIUninstaller _uninstallBundleWithIdentity:linkedToChildren:waitForDeletion:uninstallReason:temporaryReference:deleteDataContainers:wasLastReference:error:]: Destroying container com.github.kean.vpn-client-caleb.vpn-tunnel with persona 54D15361-A614-4E0D-931A-0953CDB50CE8 at /private/var/mobile/Containers/Data/PluginKitPlugin/2D0AE485-BB56-4E3E-B59E-48424CD4FD65 And then installd says this (No idea what it means) 0x16b9d3000 -[MIInstallationJournalEntry _refreshUUIDForContainer:withError:]: Data container for com.github.kean.vpn-client-caleb.vpn-tunnel is now at /private/var/mobile/Containers/Data/PluginKitPlugin/2D0AE485-BB56-4E3E-B59E-48424CD4FD65 Concerningly runningboardd seems to immediately try and stop it? Executing termination request for: <RBSProcessPredicate <RBSProcessBundleIdentifiersPredicate| {( "com.github.kean.vpn-client-caleb", "com.github.kean.vpn-client-caleb.vpn-tunnel" )}>> [app<com.github.kean.vpn-client-caleb(54D15361-A614-4E0D-931A-0953CDB50CE8)>:1054] Terminating with context: <RBSTerminateContext| explanation:installcoordinationd app:[com.github.kean.vpn-client-caleb/54D15361-A614-4E0D-931A-0953CDB50CE8] uuid:963149FA-F712-460B-9B5C-5CE1C309B2FC isPlaceholder:Y reportType:None maxTerminationResistance:Absolute attrs:[ <RBSPreventLaunchLimitation| <RBSProcessPredicate <RBSProcessBundleIdentifiersPredicate| {( "com.github.kean.vpn-client-caleb", "com.github.kean.vpn-client-caleb.vpn-tunnel" )}>> allow:(null)> ]> Then runningboardd leaves a cryptic message Acquiring assertion targeting system from originator [osservice<com.apple.installcoordinationd>:244] with description <RBSAssertionDescriptor| "installcoordinationd app:[com.github.kean.vpn-client-caleb/54D15361-A614-4E0D-931A-0953CDB50CE8] uuid:963149FA-F712-460B-9B5C-5CE1C309B2FC isPlaceholder:Y" ID:33-244-5222 target:system attributes:[ <RBSPreventLaunchLimitation| <RBSProcessPredicate <RBSProcessBundleIdentifiersPredicate| {( "com.github.kean.vpn-client-caleb", "com.github.kean.vpn-client-caleb.vpn-tunnel" )}>> allow:(null)> ]> And that seems to be all I have to go off of.... If I widen my search a bit I can see backboardd saying things like Connection removed: IOHIDEventSystemConnection uuid:57E97E5D-8CDE-467B-81CA-36A93C7684AD pid:1054 process:vpn-client type:Passive entitlements:0x0 caller:BackBoardServices: <redacted> + 280 attributes:{ HighFrequency = 1; bundleID = "com.github.kean.vpn-client-caleb"; pid = 1054; } state:0x1 events:119 mask:0x800 dropped:0 dropStatus:0 droppedMask:0x0 lastDroppedTime:NONE Or Removing client connection <BKHIDClientConnection: 0xbf9828cd0; IOHIDEventSystemConnectionRef: 0xbf96d9600; vpid: 1054(vAF7); taskPort: 0x5D777; bundleID: com.github.kean.vpn-client-caleb> for client: IOHIDEventSystemConnection uuid:57E97E5D-8CDE-467B-81CA-36A93C7684AD pid:1054 process:vpn-client type:Passive entitlements:0x0 caller:BackBoardServices: <redacted> + 280 attributes:{ HighFrequency = 1; bundleID = "com.github.kean.vpn-client-caleb"; pid = 1054; } state:0x1 events:119 mask:0x800 dropped:0 dropStatus:0 droppedMask:0x0 lastDroppedTime:NONE source:HID There's really nothing in the sysdiagnose either. No crash no nothing. I am stumped. Any idea what might be going wrong for me here? Has something about the way app extensions or sandbox rules work changed in later OSes?

I want to create a NAT64/DNS64 test network as shown here, but I cannot figure out how to do it in the latest versions of MacOS. Is this still available and how can I access the "Create NAT64 Network" checkbox?

Hi I am developing the packet tunnel extension on a SIP enabled device. If I build the app and notarize and install it on the device, it works fine. If I modify, build and execute the App (which contains the system extension), it fails with below error. 102.3.1.4 is production build. And 201.202.0.101 is for XCode build. SystemExtension "&lt;&lt;complete name&gt;&gt;.pkttunnel" request for replacement from 102.3.1.4 to 201.202.0.101 Packet Tunnel SystemExtension "&lt;&lt;complete name&gt;&gt;.pkttunnel" activation request did fail: Error Domain=OSSystemExtensionErrorDomain Code=8 "(null)" If SIP is disabled, it works fine. Is there a way the system extension can be developed even if SIP remains enabled?

I'm developing an iOS application in Swift that performs API calls using URLSession.shared. The requests work correctly when the app is in the foreground. However, when the app transitions to the background (for example, when the user switches to another app), the ongoing API calls are either paused or do not complete as expected. What I’ve tried: Using URLSession.shared.dataTask(with:) to initiate the API requests Observing application lifecycle events like applicationDidEnterBackground, but haven't found a reliable solution to allow requests to complete when backgrounded Goal: I want certain API requests to continue running or be allowed to complete even if the app enters the background. Question: What is the correct approach to allow API calls to continue running or complete when the app moves to the background? Should I be using a background URLSessionConfiguration instead of URLSession.shared? If so, how should it be properly configured and used in this scenario?