From https://developer.apple.com/forums/thread/803945?answerId=862153022#862153022, the testing of Age Range API was not available through xcode simulator back in Oct 2025. Is this available now? In particular: Is requestAgeRange testing available through simulator? Is requestAgeRange testing with sandbox account available through simulator? Is isEligibleForAgeFeatures available through simulator? Is isEligibleForAgeFeatures testing with sandbox account available through simulator? If the answer is "yes" to any of the above, which version of the xcode and ios version should I use? So far I didn't get any of the above working on the simulator, and I can't find any documentation on the answers above. Thank you!

As discussed and acknowledged here, there is a known bug with the FamilyActivityPicker. When a user expands a category that contains enough tokens to exceed the 50mb memory limit, the FamilyActivityPicker crashes. This happens quite frequently for heavy Safari users. An apple engineer mentioned on this thread that WebDomains shown in the picker are present based on the last 30 days of usage data as surfaced by WebKit. Is there any way a user can clear these WebDomains? Either programatically through our app or any other process we can guide them to as a workaround while this issue is getting fixed?

Hello, I have an AppClip technical issue I'd like to ask about: Our Xiaohongshu App (Version 9.14 & Build 9140845 & appid 741292507) was submitted to the App Store for review on December 18th and approved on December 19th, starting a phased rollout. This version was the first to support AppClip functionality, and as of today the app has been fully rolled out, but I still cannot activate the Xiaohongshu App Clip Card using the NFC tag (built-in URL: https://xhslink.com/n/22UG9jlaOfv?sourceid=911). I checked all the configurations of our project's AppClip target (Associated Domains:appclips:xhslink.com), the default experience in the ASC backend (URL: https://appclip.apple.com/id?p=com.xingin.discover.Clip), and the advanced experience (URL: https://xhslink.com/n/Arxpo4IVY9X), and all showed no abnormalities. Furthermore, the default experience URL, after being written with an NFC tag, can be successfully launched by tapping the NFC tag to open the Xiaohongshu App Clip Card, and the Card can also be opened normally in Safari on the phone. However, our advanced experience URL, after being written with an NFC tag, cannot be launched by tapping the Card. Therefore, my question is: Who please can help me check why the Xiaohongshu App Clip Card cannot be launched normally using the advanced experience URL? Thank you very much! My Expectations: My advanced experience URL configured on the ASC platform, such as https://xhslink.com/n/Arxpo4IVY9X, should be recognized and validated by the iOS system when the phone is near the NFC tag and reads https://xhslink.com/n/22UG9jlaOfv?sourceid=911, ultimately triggering the App Clip Card configured in Xiaohongshu's advanced experience settings. Additionally: We have already deployed a large number of NFC tags and other materials in many online stores, and the URL (https://xhslink.com/n/Arxpo4IVY9X) is built-in, and our 9.14 version is fully implemented. However, the newly developed App Clip feature is not working, which is very urgent and I hope Apple can help me find the cause of the problem and how to improve it as soon as possible. Thank you very much!

I created in my Objective-c project the AgeRange check for a special function. It is working well on an iPhone. Now I used my Mac and added my app to the TestFlight on my macOS Tahoe 26.1 Here it is directly crashing. But how can I debug an Application which is created for iPhone and iPad with Xcode? I cannot use the target myMac when running a debugging mode. So how is the debugging working for such Apps?

Hi. The WWDC video of the v2 weatherkit api showed some examples for the REST API. However, they were very limited. The documentation for the REST API is currently for the v1 weatherkit API. When will the documentation for the v2 API be released? There are some new features of the v2 that I would really like to use, but I can't without knowing the new v2 REST API specifications. Any guidance would be much appreciated. Thanks!

Is this intended behavior? I want my app to act like the regular Clock app and snooze alarms when user taps volume down button but apparently volume down button stops the alarm. Is this normal or am I missing something?

My scenario is to help users set up a full year's alarms at once. The dates for the alarms follow a specific pattern, but not fixed weekdays, so the fixed-date type is needed.

I'd like to set my macOS app written in Swift as default app when opening .mp4 file. I think I can do it with setDefaultApplication(at:toOpen:completion:). https://developer.apple.com/documentation/appkit/nsworkspace/3753002-setdefaultapplication However, permission error occurs when I use it. The error is: Error Domain=NSCocoaErrorDomain Code=256 "The file couldn’t be opened." UserInfo={NSUnderlyingError=0x6000031d0150 {Error Domain=NSOSStatusErrorDomain Code=-54 "permErr: permissions error (on file open)"}} I tried to give my app full-disk access, but it didn't work. I also tried to use setDefaultApplication(at:toOpenFileAt:completion:), then it works with no error, but it effects on only one file. What I want to do is to set my app as default app of all .mp4 files. How do I achieve this? My code is like below: let bundleUrl = Bundle.main.bundleURL NSWorkspace.shared.setDefaultApplication(at: bundleUrl, toOpen: .mpeg4Movie) { error in print(error) } Thank you.

Since I updated to iOS 18, CallKit-linked caller not display on screen of CarPlay. CarPlay display only "{App Name} Caller ID". When iOS version was 17.x, CarPlay displayed caller name of CallKit-linked contact. I think CarPlay should perform the same function as iOS 17. Please review it.

Hello, I'm currently experiencing an issue with the DeviceActivityMonitor extension in my code, specifically with the eventDidReachThreshold callback. I'm hoping to get some insights into why this problem occurs and how to resolve it. Problem: Issue 1: The eventDidReachThreshold callback is not triggering as expected. It appears that the callback is not being invoked when the threshold is reached. Issue 2: After a few seconds, the eventDidReachThreshold callback starts to trigger multiple times. This unexpected behavior is causing problems in my code, as it results in incorrect actions being taken. iOS version: iOS16.7.2 and iOS17.1 Xcode version: 15.0.1 Swift version: 5.9 Here is my code to start the monitoring: func startMonitoring() { var startTime : DateComponents = DateComponents(hour: 0, minute: 0) let endTime : DateComponents = DateComponents(hour: 23, minute: 59) /// Creates the schedule for the activity, specifying the start and end times, and setting it to repeat. let schedule = DeviceActivitySchedule(intervalStart: startTime, intervalEnd: endTime, repeats: true, warningTime: nil) /// Defines the event that should trigger the encouragement. let event = DeviceActivityEvent(applications: socialActivitySelection.applicationTokens, categories: socialActivitySelection.categoryTokens, webDomains: socialActivitySelection.webDomainTokens, threshold: DateComponents(minute: 2)) let events: [DeviceActivityEvent.Name: DeviceActivityEvent] = [.socialScreenTimeEvent : event] do { activityCenter.stopMonitoring([.socialScreenTime]) /// Tries to start monitoring the activity using the specified schedule and events. try activityCenter.startMonitoring(.socialScreenTime, during: schedule, events: events) } catch { /// Prints an error message if the activity could not be started. print("Could not start monitoring: \(error)") } } If there are any known workarounds or potential solutions, please share them. Thank you for your help in resolving this problem.

Hi everyone. I've downloaded the the 26.2 beta 2 and installed it on a device in the settings after i create a new sandbox test account i see the options in Age Assurance. The problem is i got the popup the first time i opened the application and decided to share, but after that i always get the following error: DeclaredAgeRange.AgeRangeService.Error.notAvailable I tried testing with different bundle id and different sandbox test account but still it doesn't work. How can i test the cases without erasing the device ?

According to Apple's documentation at https://developer.apple.com/documentation/storekit/testing-age-assurance-in-sandbox?language=objc, the testing steps and expected responses are outlined as follows: ​Test app consent revocation​ To test the notification when a parent or guardian revokes access to your app on behalf of their child, follow these steps: Start with a Sandbox account. From the Age Assurance settings, tap ​Revoke App Consent. Enter your app’s Bundle ID (for example, com.example.bundle). Tap ​Revoke Consent​ to simulate the revocation. Confirm that the system displays ​​“Notification Triggered”​​ with the message ​​“A notification will be sent to the developer server soon.”​ I followed the steps exactly as described above, but during the fifth step, instead of seeing the prompt ​​"A notification will be sent to the developer server soon,"​​ a pop-up dialog with only a confirmation button appeared. After clicking it, there was no further response, and our server did not receive any notification (neither from the Sandbox nor the Production environment).

We have an application which is written in Swift, which activates Transparent Proxy network extension. We are using Jamf MDM profile for deployment. To avoid the user deleting / disabling the extension from General -> LogIn Items & Extension -> Network Extensions screen, we are using "Non-removable system extensions from UI" attribute under Allowed System Extensions and Teams IDs section. In new Mac OS 26 (Tahoe), user can also enable/disable the extension from General -> LogIn Items & Extension -> Apps tab. The "Non-removable system extensions from UI" attribute set in Jamf MDM profile does not apply to this tab. Same attribute is working for General -> LogIn Items & Extension -> Extensions tab and there the slider is greyed out and Remove option is not available under more menu. Is there any new key/configuration defined to disable the slider from General -> LogIn Items & Extension -> Apps tab? Created https://feedbackassistant.apple.com/feedback/18198031 - FB18198031 feedback assistant ticket as well.

Hello, I’m encountering an issue with Universal Links in my iOS app. After some investigation, I found that the root cause seems to be that Apple’s request through there CDN server to access the .well-known/apple-app-site-association file is blocked by our firewall, which enforces geographic access restrictions as part of our security policy. Because of this restriction, Apple’s validation or link verification requests are being denied, and the Universal Links are not working as expected. I’d like to get some guidance from the community or Apple engineers on the following: 1. Does Apple provide an official list of IP ranges or domains that need to be allowed through the firewall for Universal Link validation? 2. Are there alternative methods to handle Universal Link verification in environments with geographic restrictions? 3. Would whitelisting specific Apple services or endpoints be a recommended or safe solution? Any input or recommendations would be greatly appreciated. Environment Details: • iOS app using Universal Links • Server protected by a firewall with regional restrictions • AASA file hosted correctly and accessible via browser Thanks in advance for your help and insights.

Hi All, I’m puzzled by this issue: my app uses WeatherKit to fetch hourly UV-index and temperature forecasts. The same build, running on the latest iOS, succeeds on most devices but consistently fails on a few. Strangely, the paired Apple Watch version retrieves the data without problems. Could WeatherKit be applying per-user throttling? Any insight would be greatly appreciated.

Hello, I have a question about data deserialization using NSKeyedUnarchiver in iOS SDK development. Current Situation: Previously, we were using the NSKeyedUnarchiver.unarchiveObject(with: Data) function We have changed to using the NSKeyedUnarchiver.unarchivedObject(ofClasses:from:) method to deserialize complex objects stored in UserDefaults We need to include all types in the ofClasses parameter, including Swift primitive types as well as various custom classes and structs within the project Questions: Implementation Approach: Is it correct pattern to include all classes defined in the project in the ofClasses array? Is this approach recommended? Runtime Stability: When using this approach, is there a possibility of runtime crashes? Are there any performance issues? Alternative Methods: If the current approach is not the correct pattern, what alternatives should we consider? Current Code Structure: All model classes conform to the NSSecureCoding protocol We use the requiringSecureCoding: true parameter We use a whitelist approach, explicitly listing only allowed classes I would like to know if this structure is appropriate, or if we should consider a different approach. Thank you.

Issue with App Clip Card Showing "App Clip unavailable" for DIGI LIVE App In my DIGI LIVE application, I have an App Clip configured for iOS 17.6+ (the file exceeds the 15 MB limit), and I have made all the necessary preparations for the App Clip to work correctly. However, the App Clip card constantly displays an "App Clip unavailable" error for various users (depending on their system language). The URL associated with the App Clip invocation is: https://ar.digi-live.de The AASA file is located at /.well-known/apple-app-site-association and contains the required fields for the App Clip: { "applinks": { "details": [ { "appIDs": ["N9QR6LF765.de.digilive.app"], "components":[ { "#": "no_universal_links", "exclude": true, "comment": "Matches any URL whose fragment equals no_universal_links and instructs the system not to open it as a universal link" }, { "/": "*", "comment": "Matches any URL like ar.digi-live.de" } ] } ] }, "appclips": { "apps": ["N9QR6LF765.de.digilive.app.Clip"] } } If I use the default App Clip link (https://appclip.apple.com/id?p=de.digilive.app.Clip) to launch it, the "App Clip unavailable" error no longer appears. But if I delete the App Clip from the settings, the error comes back, and it can only be launched again using the default link. It feels like the problem is with the App Clip loading at the moment the App Clip card is triggered — it simply fails to load. Video https://storage.yandexcloud.net/mmrs/files/digilive/IMG_2259.mp4

According to the documentation, using Scope(restriction: .none) can expose the extension point to third-party app extensions. Below is my implementation, which ultimately results in an error. Code for declaring the extension point: @available(iOS 26.0, *) extension AppExtensionPoint { @Definition static var priceExtension: AppExtensionPoint { Name("priceExtension") UserInterface(false) Scope(restriction: .none) } } Code for locating the extension point: monitor = try await AppExtensionPoint.Monitor(appExtensionPoint: .priceExtension) When executing the code to locate the extension point, the following error occurs: However, in practice, I found that declaring the extension point in this way results in an error when trying to locate it: Error Domain=com.apple.extensionKit.errorDomain Code=19 "Failed to add observer" UserInfo={NSLocalizedDescription=Failed to add observer}

Hi, In my app, I have an option to remove a contact from a contact group (using the Contacts framework), and it's been working fine till recently users of the macOS version reported that it's not working. I have been using the CNSaveRequest removeMember(contact, from: group) API. The same API works fine on iOS. I'm not sure when it started but it seems to be affecting macOS14.6 as well as 15.1. I was able to reproduce it in a small test project as well, and have the same experience (the API works on iOS but not on macOS), so it definitely seems like a problem with the framework. Can someone confirm this, and/or suggest a workaround? Here's the code I run to test it out ...a simple SwiftUI view that has 4 buttons: Create contact and group Add contact to group Remove contact from group (optional) cleanup by deleting contact and group It's the 3rd step that seems to fail on macOS, but works fine on iOS. Here's the code to test it out: struct ContentView: View { let contactsModel = ContactsStoreModel() var body: some View { VStack (alignment: .center, spacing: 15){ Button ("1. Add Contact And Group") { print("add contact button pressed") contactsModel.addTestContact() if let _ = contactsModel.createdContact { print("created contact success") } } Button ("2. Add Contact To Group") { print("add to group button pressed") contactsModel.addContactToGroup() } Button ("3. Remove Contact From Group") { print("remove from group button pressed") contactsModel.removeContactFromGroup() } Button ("4. Delete Contact and Group") { print("remove from group button pressed") contactsModel.deleteContactAndGroup() } } .padding() } } #Preview { ContentView() } @available(iOS 13.0, *) @objc final class ContactsStoreModel: NSObject, ObservableObject { let contactStore = CNContactStore() var createdContact : CNContact? var createdGroup : CNGroup? public func addTestContact() { let storeContainer = contactStore.defaultContainerIdentifier() let contact = CNMutableContact() contact.givenName = "Testing" contact.familyName = "User" contact.phoneNumbers = [CNLabeledValue(label: "Cell", value: CNPhoneNumber(stringValue: "1234567890"))] let group = CNMutableGroup() group.name = "Testing Group" print("create contact id = \(contact.identifier)") print("create group id = \(group.identifier)") do { let saveRequest = CNSaveRequest() saveRequest.transactionAuthor = "TestApp" saveRequest.add(contact, toContainerWithIdentifier: storeContainer) saveRequest.add(group, toContainerWithIdentifier: storeContainer) try contactStore.execute(saveRequest) createdContact = contact createdGroup = group } catch { print("error in store execute = \(error)") } } public func addContactToGroup() { if let contact = createdContact, let group = createdGroup { do { let saveRequest = CNSaveRequest() saveRequest.transactionAuthor = "TestApp" saveRequest.addMember(contact, to: group) try contactStore.execute(saveRequest) } catch { print("error in store execute = \(error)") } } } public func removeContactFromGroup() { if let contact = createdContact, let group = createdGroup { do { let saveRequest = CNSaveRequest() saveRequest.transactionAuthor = "TestApp" saveRequest.removeMember(contact, from: group) try contactStore.execute(saveRequest) } catch { print("error in store execute = \(error)") } } } public func addGroupAndContact() { let storeContainer = contactStore.defaultContainerIdentifier() let group = CNMutableGroup() group.name = "Test Group" print("create group id = \(group.identifier)") if let contact = createdContact { do { let saveRequest = CNSaveRequest() saveRequest.transactionAuthor = "TestApp" saveRequest.add(group, toContainerWithIdentifier: storeContainer) saveRequest.addMember(contact, to: group) try contactStore.execute(saveRequest) createdGroup = group } catch { print("error in store execute = \(error)") } } } public func deleteContactAndGroup() { if let contact = createdContact, let group = createdGroup { do { let mutableGroup = group.mutableCopy() as! CNMutableGroup let mutableContact = contact.mutableCopy() as! CNMutableContact let saveRequest = CNSaveRequest() saveRequest.transactionAuthor = "TestApp" saveRequest.delete(mutableContact) saveRequest.delete(mutableGroup) try contactStore.execute(saveRequest) } catch { print("error in deleting store execute = \(error)") } } } }

I put a test.mp3 (30 sec) file into the App Bundle. I scheduled an AlarmKit alarm with the file name test.mp3. The custom sound plays ✅ I copied the file from the App Bundle to Library/Sounds/test2.mp3. I scheduled an AlarmKit alarm with the file name test2.mp3. Instead of playing the custom sound, it falls back to the default sound ❌ According to the documentation, sounds placed in Library/Sounds should be playable: I filed report FB19779004 on August 20, but haven’t received any response yet. This functionality is critical for our use case, so could you please let me know whether this is expected to be fixed soon, or if I’m misunderstanding the intended behavior?