Hi, trying to upgrade from macOS Sequoia 15.3.2 to 15.4 gives this error. Now I can not boot from internal drive of M1 Air 2020, because it restores 15.4, that does not boot. I can only boot from external USB SSD that has macOS 15.3.2. How I can install back 15.3.2 or alternatively newer macOS to internal drive? I only have one Mac, this M1 Air 2020. I have AppleAppleCare+ to 9/18/25. Remaining of error is attached here: Can't ignore lock validation @t8020dart.c:535 panic(cpu 2 caller 0x0): t8020dart 0xfffffdf053908000 (dart-dispext0): Can't ignore lock validation @t8020dart.c:535 Debugger message: panic Memory ID: 0x6 OS release type: Not set yet OS version: Not set yet Kernel version: Darwin Kernel Version 24.4.0: Wed Mar 19 21:12:54 PDT 2025; root:xnu-11417.101.15~1/RELEASE_ARM64_T8103 Fileset Kernelcache UUID: 2BBA525B95E0E6B962ECC44FC093AB57 Kernel UUID: 4E6CBD31-CD1E-3939-8A63-211A206AFA66 Boot session UUID: 3A34167D-2534-402F-9679-2CAD45F67CDA iBoot version: iBoot-11881.101.1 iBoot Stage 2 version: iBoot-11881.101.1 secure boot?: YES

Hello Everyone, I encountered an issue with PCI memory access in DriverKit. In my case, BAR0 is not available, but BAR1 is ready for use. Here’s the log output: !!! ERROR : Failed to get BAR0 info (error: 0xe00002f0). !!! BAR1 - MemoryIndex: 0x00000000, Size: 0x00040000, Type: 0 Issue Description When I initially wrote to BAR0 using memoryIndex = 0, it worked successfully: AME_Address_Write_32(pAMEData, pAMEData->memoryIndex, AME_HOST_INT_MASK_REGISTER, 0x0F); However, I mistakenly forgot to update memoryIndex to 1 for BAR1. Surprisingly, the write operation still succeeded. When I fixed memoryIndex = 1 for BAR1, the write operation no longer had any effect. There was no error, but the expected behavior did not occur. Relevant API (From IOPCIDevice.iig) /*! /*! * @brief Writes a 32-bit value to the PCI device's aperture at a given memory index. * @discussion This method writes a 32-bit register on the device and returns its value. * @param memoryIndex An index into the array of ranges assigned to the device. * @param offset An offset into the device's memory specified by the index. * @param data A 32-bit value to be written in host byte order. */ void MemoryWrite32(uint8_t memoryIndex, uint64_t offset, uint32_t data) LOCALONLY; Log Output: Writes to BAR0 (memoryIndex = 0) AME_Address_Write_32() called memoryIndex: 0, offset: 0x34, data: 0xf Wrote data 0xF to offset 52 AME_Address_Write_32() called memoryIndex: 0, offset: 0xa0, data: 0x1 Wrote data 0x1 to offset 160 AME_Address_Write_32() called memoryIndex: 0, offset: 0x20, data: 0xffffffff Wrote data 0xFFFFFFFF to offset 32 Writes to BAR1 (memoryIndex = 1) – No Response AME_Address_Write_32() called memoryIndex: 1, offset: 0x34, data: 0xf No confirmation log, no visible effect. Questions What should memoryIndex be set to for BAR1? The log shows "BAR1 - MemoryIndex: 0x00000000", but should I be using 1 instead? How can I verify if a write operation to BAR1 is successful? Is there a way to check if the memory region is actually writable? Should I use MemoryRead32() to confirm the written value? Any guidance would be greatly appreciated! Best Regards, Charles

We have a macOS application which interacts with our USB and PCI devices to perform SCSI and NVME commands on them. We use IOUSBHost, IOUSBLib and IOKitLib for USB interface and have created a custom driver to interact with PCI devices. Is there a way we can implement a similar functionality for iOS as well if we connect the cards and readers using OTG?

When plugging in my matched USB device I see the logs below. It seems the kernelmanagerd process is sandboxed and can't write out the reason my Dext failed to load. Is there somewhere else I can look for this info? default 11:03:22.175152-0700 kernelmanagerd Received kext load notification: me.keithg.MyUserUSBInterfaceDriver default 11:03:22.177637-0700 kernel 1 duplicate report for Sandbox: icdd(2124) allow file-read-data /Library/Image Capture/Devices error 11:03:22.177681-0700 kernel Sandbox: kernelmanagerd(545) deny(1) file-write-create /private/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T/com.apple.kernelmanagerd/TemporaryItems com.apple.libcoreservices error 11:03:22.177711-0700 kernelmanagerd mkdir: path=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T/com.apple.kernelmanagerd/TemporaryItems/ mode= -rwx------: [1: Operation not permitted] error 11:03:22.179361-0700 kernel Sandbox: kernelmanagerd(545) deny(1) file-write-create /private/var/db/loadedkextmt.plist.sb-5a00fc77-LNttZF com.apple.libcoreservices error 11:03:22.177755-0700 kernelmanagerd _dirhelper_relative_internal: error for path <private>: [1: Operation not permitted] com.apple.accessories default 11:03:22.177674-0700 WindowServer Sending analytics event... (eventName: com.apple.ioport.transport.USB.published) error 11:03:22.179913-0700 kernelmanagerd Failed to write extension load report plist.

I read that iPadOS supports driverkit, and, presumably, the same serial FTDI UARTs as macOS. Has this been migrated to USB-C iPhones on iOS 18? After some searching, the developer doc is not clear, and web responses are contradictory. We are currently using it for a wired sensor option of our BlueTooth HR sensor. When it is used in wired config, the radios are turned off. This is important to some of our customers. Since Lightning MFI sensors are being discontinued with Apple killing Lightning, we would love to have an alternative for iOS. -- Harald

I'm trying to iterate through a USB device but the iterator is always empty or contains only the matched interface: Single interface in Iterator This happens when my driver matches against the interface. Because I need to use 2 interfaces (control and cdc), I try to open the IOUSBHostDevice (copied from the interface) and iterate through the rest, but I only get the interface my dext matched with. Empty Iterator I decided to match against USB communication devices, thinking things would be different. However, this time the interface iterator is completely empty (provider is IOUSBHostDevice). Here's a snippet of my code before iterating with IOUSBHostDevice->CopyInterface(): // teardown the configured interfaces. result = device->SetConfiguration(ivars->Config, true); __Require_noErr_Action(result, _failure_Out, ELOG("IOUSBHostDevice::SetConfiguration failed 0x%x", result)); // open usb device result = device->Open(this, 0, 0); __Require_noErr_Action(result, _failure_Out, ELOG("Failed to open IOUSBHostDevice")); // Get interface iterator result = device->CreateInterfaceIterator(&iterRef); __Require_noErr_Action(result, _failure_Out, ELOG("IOUSBHostDevice::CreateInterfaceIterator failed failed: 0x%x", result));

Hello Everyone, I am trying to create a Fake SCSI target based on SCSIControllerDriverKit.framework and inherent from IOUserSCSIParallelInterfaceController, here is the code kern_return_t IMPL(DRV_MAIN_CLASS_NAME, Start) { ... // Programmatically create a null SCSI Target SCSIDeviceIdentifier nullTargetID = 0; // Example target ID, adjust as needed ret = UserCreateTargetForID(nullTargetID, nullptr); if (ret != kIOReturnSuccess) { Log("Failed to create Null SCSI Target for ID %llu", nullTargetID); return ret; } ... } According the document UserCreateTargetForID, after creating a TargetID successfully, the framework will call the UserInitializeTargetForID() The document said: As part of the UserCreateTargetForID call, the kernel calls several APIs like UserInitializeTargetForID which run on the default dispatch queue of the dext. But after UserCreateTargetForID created, why the UserInitializeTargetForID() not be invoked automatically? Here is the part of log show init() - Start init() - End Start() - Start Start() - try 1 times UserCreateTargetForID() - Start Allocating resources for Target ID 0 UserCreateTargetForID() - End Start() - Finished. UserInitializeController() - Start - PCI vendorID: 0x14d6, deviceID: 0x626f. - BAR0: 0x1, BAR1: 0x200004. - GetBARInfo() - BAR1 - MemoryIndex: 0, Size: 262144, Type: 0. UserInitializeController() - End UserStartController() - Start - msiInterruptIndex : 0x00000000 - interruptType info is 0x00010000 - PCI Dext interrupt final value, return status info is 0x00000000 UserStartController() - End Any assistance would be greatly appreciated! Thank you in advance for your support. Best regards, Charles

Hello Everyone, I am working on migrating a KEXT to DriverKit but am struggling to resolve a specific issue. The code in question is simple, but I haven't been able to find a solution. void AME_IO_milliseconds_Delay(AME_U32 Delay) { Log("AME_IO_milliseconds_Delay()"); IOSleep(Delay); return; } //delay for a number of microseconds void AME_IO_microseconds_Delay(AME_U32 Delay) { Log("AME_IO_microseconds_Delay()"); IODelay(Delay); return; } I've sought help from Copilot and ChatGPT, but their suggestions haven't worked. Any guidance on how to implement this functionality in DriverKit would be greatly appreciated. Thank you for your time and assistance. Best regards, Charles

I'm working on a project to allow HID input from macOS to a connected iOS device. Are we prohibited from matching to a connected iPhone with DriverKit? I see the attribute kCDCDoNotMatchThisDevice for my iPhone is YES when looking at the IO registry and my dext does not initialize

When my virtual CoreAudio server plugins propagates a change to it´s device name the CoreAudio system does not seem to reflect the change. My user mode application subscribes to the property change and receives the change though. I also alternatively submitted a kAudioObjectPropertyName change with the same effect. Is this possible at all and what needs to be done then? Are there restrictions about which properties can be successfully changed and are reflected by the system? Any hint is highly appreciated! Thanks

Hello Everyone, I have noticed an inconsistency in the KEXT status between the System Information Extensions section and the output of the kextstat command. In System Information, the extension appears as loaded: ACS6x: Version: 3.8.3 Last Modified: 2025/3/10, 8:03 PM Bundle ID: com.Accusys.driver.Acxxx Loaded: Yes Get Info String: ACS6x 3.8.4 Copyright (c) 2004-2020 Accusys, Ltd. Architectures: arm64e 64-Bit (Intel): No Location: /Library/Extensions/ACS6x.kext/ Kext Version: 3.8.3 Load Address: 0 Loadable: Yes Dependencies: Satisfied Signed by: Developer ID Application: Accusys, Inc (K3TDMD9Y6B) Issuer: Developer ID Certification Authority Signing time: 2025-03-10 12:03:20 +0000 Identifier: com.Accusys.driver.Acxxx TeamID: K3TDMD9Y6B However, when I check using kextstat, it does not appear as loaded: $ kextstat | grep ACS6x Executing: /usr/bin/kmutil showloaded No variant specified, falling back to release I use a script to do these jobs echo " Change to build/Release" echo " CodeSign ACS6x.kext" echo " Compress to zip file" echo " Notary & Staple" echo " Unload the old Acxxx Driver" echo " Copy ACS6x.kext driver to /Library/Extensions/" echo " Change ACS6x.kext driver owner" echo " Loaded ACS6x.kext driver" sudo kextload ACS6x.kext echo " Rebiuld system cache" sudo kextcache -system-prelinked-kernel sudo kextcache -system-caches sudo kextcache -i / echo " Reboot" sudo reboot But it seems that the KEXT is not always loaded successfully. What did I forget to do? Any help would be greatly appreciated. Best regards, Charles

I have Windows drives on my Mac but I didn't get the Wellness boot Campdrivers how can I install them