Hi, I'm trying to fix tvOS view for VoiceOver accessibility feature: TabView { // 5 tabs Text(title) Button(play) ScrollView { // Live LazyHStack { 200 items } } ScrollView { // Continue watching LazyHStack { 500 items } } } When the view shows up VoiceOver reads: "Home tab 1 of 5, Item 2" - not sure why it reads Item 2 of the first cell in scroll view, maybe beacause it just got loaded by LazyHStack. VocieOver should only read "Home tab 1 of 5" When moving focus to scroll view it reads: "Live, Item 1" and after slight delay "Item 1, Item 2, Item 3, Item 4" When moving focus to second item it reads: "Item 2" and after slight delay "Item 1, Item 2, Item 3, Item 4" When moving focus to third item it reads: "Item 3" and after slight delay "Item 1, Item 2, Item 3, Item 4" It should be just reading what is focused, idealy just "Live, Item 1, 1 of 200" then after moving focus on item 2 "Item 2, 2 of 200" this time without the word "Live" because we are on the same scroll view (the same horizontal list) Currently the app is unusable, we have visually impaired testers and this rotor reading everything on the screen is totaly confusing, because users don't know where they are and what is actually focused. This is a video streaming app and we are streaming all the time, even on home page in background, binge plays one item after another, usually there is never ending Live stream playing, user can switch TV channel, but we continue to play. Voice over should only read what's focused after user interaction. Original Apple TV app does not do that, so it cannot be caused by some verbose accessibility settings. It reads correctly only focused item in scrolling lists. How do I disable reading content that is not focused? I tried: .accessibilityLabel(isFocused ? title : "") .accessibilityHidden(!isFocused) .accessibilityHidden(true) - tried on various levels in view hierarchy .accessiblityElement(children: .ignore) - even focused item is not read back by voice over .accessiblityElement(children: .ignore) - even focused item is not read back by voice over .accessiblityElement(children: .contain) - tried on various levels in view hierarchy .accessiblityElement(children: .combine) - tried on various levels in view hierarchy .accessibilityAddTraits(.isHeader) - tried on various levels in view hierarchy .accessibilityRemoveTraits(.isHeader) - tried on various levels in view hierarchy // the last 2 was basically an attempt to hack it .accessibilityRotor("", ranges []) - another hack that I tried on ScrollView, LazyHStack, also on top level view. 50+ other attempts at configuring accessibility tags attached to views. I have seen all the accessibility videos, tried all sample code projects, I haven't found a solution anywhere, internet search didn't find anything, AI didn't help as it can only provide code that someone else wrote before. Any idea how to fix this? Thanks.

Context: We are using UIKit to provide accessibility in our app for our iOS users. Our app majorly contains documents/books that user can read. Issue: The issue is VoiceOver is skipping the lines given to it when there are some leading spaces in it. We have observed this issue in different languages. This is only happening for line granularity, other granularities seems to be working as expected. Implementation: We are using below API's to provide line content to voice over. UIAccessibilityReadingContent - accessibilityPageContent - accessibilityFrameForLineNumber - accessibilityContentForLineNumber We are creating UIAccessibilityElement objects to pass to VoiceOver and each UIAccessibilityElement implements UIAccessibilityReadingContent to provide readable content. We also use below APIs to cross element boundaries for all granular navigations. accessibilityNextTextNavigationElement accessibilityPreviousTextNavigationElement We want to know whether skipping the line when provided with leading spaces is expected or a bug in UIKit.

Request: Name Recognition → Shortcut for SOS Flashlight + Vibration Right now, iOS Name Recognition works, but all I can do is flash the tiny notification light. It would be much more useful if Name Recognition could trigger a Shortcut. That way, I could set it to flash the flashlight in an SOS pattern and vibrate, making the alert impossible to miss. I tried using Custom Alarm, but it won’t let me record my spoken name, so it doesn’t really solve the problem. If Apple allowed Name Recognition to trigger Shortcuts — or expanded “Custom” to support names/words — this would open up far more practical, real-world alerts.

Hi, I’ve been reviewing the Apple Wallet provisioning documentation (Getting Started with Apple Pay In-App Provisioning_ Verification_Security_Wallet Extensions )and had a few questions regarding the color path recommendation (Green, Yellow, Orange, Red) returned during the in-app provisioning flow: Who determines the color path—is it Apple directly, the Payment Network Operator (PNO), or both? What criteria are used to determine the color path (e.g., device info, Apple ID reputation, past provisioning attempts)? At what point in the provisioning flow is the color path recommendation received? Is it included in the response after the PKAddPaymentPassRequest is submitted? Is it accessible through any specific property or callback in the delegate method? Additionally, for Orange Path with Reason Code 0G, I understand that in-app verification is not allowed and must be handled via tenured channels (e.g., SMS/email). Can you confirm if this logic still applies for requests initiated from within the issuer's iOS app? Would appreciate any clarification or pointers to related documentation.

In VoiceOver, when using Group Navigation style, the cursor first focuses on the semantic group. To navigate inside the group, a two-finger swipe (left or right) can be used. This behavior works for default containers like the Navigation Bar, Tab Bar, and Tool Bar. How can I achieve the same behavior for a custom view? I tried setting accessibilityContainerType = .semanticGroup, but it only works for Mac Catalyst. Is there an equivalent approach for iOS?

Added a view controller in the storyboard, added a tableview in this view, and added a cell under the table, when I run the APP to jump to the page, when using the narration function, I find that when I use three fingers to swipe up or down, a sentence will be broadcast in English, I want to no longer change the accessiblity of the cell, when I perform the behavior of swiping up or down with three fingers, Broadcast how Chinese should be implemented.

I’m trying to enroll in the Apple Developer Program as an individual. I’ve gone through the steps on the website and started the purchase process. However, after a couple of days when I return to the site, it doesn’t remember my progress — I have to start the enrollment from scratch every time. Is this expected behavior? Am I missing a step to save my progress or complete the enrollment properly? Any help or guidance would be appreciated. Thank you!

In SwiftUI, the date picker component is breaking in colour contrast accessibility. Below code has been use to create date picker: struct ContentView: View { @State private var date = Date() @State private var selectedDate: Date = .init() var body: some View { let min = Calendar.current.date(byAdding: .day, value: 14, to: Date()) ?? Date() let max = Calendar.current.date(byAdding: .year, value: 4, to: Date()) ?? Date() DatePicker( "Start Date", selection: $date, in: min ... max, displayedComponents: [.date] ) .datePickerStyle(.graphical) .frame(alignment: .topLeading) .onAppear { selectedDate = Calendar.current.date(byAdding: .day, value: 14, to: Date()) ?? Date() } } } #Preview { ContentView() } attaching the screenshot of failure accessibility.

At present, in iOS, if using the in-house app, there may be crashes in the new iOS 18.3 and later versions, but it works normally on other phones and the certificate is not problematic. A total of 3 machines were found, and there was no pattern between the machines and the system, with different models and versions. We tested it on a machine that crashes, but the app downloaded from the store doesn't. If the same app is packaged and installed directly in the development tool, it will crash. Is this related to compatibility with the new version of IOS? Is there a solution? Do others also have relevant situations?

Hello I tried implementing the ASAM for macOS as per apple guidelines with configuration profile mentioned here but didn't had any success. Then Apple suggested to use requestGuidedAccessSession in macOS but that is only supported in macOS Catalyst but that also didn't work with valid config profiles too. Did anyone get success with ASAM mode without assessment entitltlement?

Environment：xcode 16.2 WidgetKit： Image(uiImage: UIImage(named: "jp_jump")!).resizable().scaledToFit().frame(width: 58, height: 16).padding(EdgeInsets(top: 0, leading: 16, bottom: 0, trailing: 0)) ”jp_jump“： Local color picture load widget crashes info: Thread 4: EXC_RESOURCE (RESOURCE_TYPE_MEMORY: high watermark memory limit exceeded) (limit=30 MB)

I have just purchased an Apple developer Account from Bangladesh and it sent codes perfectly for the first 2-3 times for logging in, but after that no matter what I do it doesn't send verification code and I am stuck, I now cannot log in and this is extremely extremely frustrating

I'm encountering an issue related to BLE device discovery on iOS. I have a BLE peripheral device that I initially connected to using an iOS device. After this connection, the BLE device's advertised name was programmatically changed by the peripheral. Now, when I try to scan for this device using other iOS devices, it does not appear in the scan results in most apps — including nRF Connect and our own custom BLE app that uses CoreBluetooth. A few observations: The device is definitely powered on and advertising (confirmed via Android). The name change is reflected correctly on Android and on the iOS device that originally connected to it. Other iOS devices no longer see the device in their scan list.

While it is possible to scroll content using VoiceOver on macOS, I was not able to find any NSAccessibility APIs related to it (such as accessibilityScroll: on iOS).

I'd like to add borders to all buttons in the iOS simulator from my Mac app. First I get the simulator window. Then I access the children of all AXGroup and if it's a button or a static text, I add a border. But for some buttons this does not work. In the example image the NavigationBarButtons are not found. I guess the problem is, that for some AXGroup the children array access with AXChildren is empty. Here is some relevant code: - (NSArray<DDHOverlayElement *> *)overlayChildrenOfUIElement:(AXUIElementRef)element index:(NSInteger)index { NSMutableArray<DDHOverlayElement *> *tempOverlayElements = [[NSMutableArray alloc] init]; NSLog(@">>> -----------------------------------------------------"); NSString *role = [UIElementUtilities roleOfUIElement:element]; NSRect frame = [UIElementUtilities frameOfUIElement:element]; NSLog(@"%@, role: %@, %@", element, role, [NSValue valueWithRect:frame]); NSArray *lineage = [UIElementUtilities lineageOfUIElement:element]; NSLog(@"lineage: %@", lineage); NSArray<NSValue *> *children = [UIElementUtilities childrenOfUIElement:element]; if (children.count < 1) { NSLog(@"NO CHILDREN"); } for (NSInteger i = 0; i < [children count]; i++) { NSValue *child = children[i]; AXUIElementRef uiElement = (__bridge AXUIElementRef)child; NSString *role = [UIElementUtilities roleOfUIElement:uiElement]; NSRect frame = [UIElementUtilities frameOfUIElement:uiElement]; NSLog(@"----%@, role: %@, %@", child, role, [NSValue valueWithRect:frame]); } NSLog(@"<<< -----------------------------------------------------"); for (NSInteger i = 0; i < [children count]; i++) { NSValue *child = children[i]; AXUIElementRef uiElement = (__bridge AXUIElementRef)child; NSString *role = [UIElementUtilities roleOfUIElement:uiElement]; NSRect frame = [UIElementUtilities frameOfUIElement:uiElement]; NSLog(@"%@, role: %@, %@", child, role, [NSValue valueWithRect:frame]); if ([role isEqualToString:@"AXButton"] || [role isEqualToString:@"AXTextField"] || [role isEqualToString:@"AXStaticText"]) { NSString *tag = [NSString stringWithFormat:@"%ld%ld", (long)index, (long)i]; NSLog(@"tag: %@", tag); DDHOverlayElement *overlayElement = [[DDHOverlayElement alloc] initWithUIElementValue:child tag:tag]; [tempOverlayElements addObject:overlayElement]; } else if ([role isEqualToString:@"AXGroup"] || [role isEqualToString:@"AXToolbar"]) { [tempOverlayElements addObjectsFromArray:[self overlayChildrenOfUIElement:uiElement index:++index]]; } else if ([role isEqualToString:@"AXWindow"]) { [self.overlayWindowController setFrame:[UIElementUtilities frameOfUIElement:uiElement]]; [tempOverlayElements addObjectsFromArray:[self overlayChildrenOfUIElement:uiElement index:index]]; } } return [tempOverlayElements copy]; } For some AXGroup the children are found. For some they are empty. I cannot figure out why. Does anyone have an idea what I'm doing wrong?

I created a desktop app for Mac using Xojo. The app has a controller in the main window and displays advertisements and notices on a connected external display. I'm currently connecting my iMac24 to a REGZA-55M550M via AirPlay, and displaying video from the iMac to the REGZA, but the connection occasionally drops out. Yesterday, the connection dropped about 3.5 hours after connecting. Of course, I have other apps running on the iMac, but I'm not using any operations that would put a strain on the network or memory. Does AirPlay connection to non-Apple products become unstable over long periods of time?

why did the screen recorder button disappear? It cannot be found anywhere.

It’s very annoying but on my iPhone 12 Pro I keep getting the accessibility app with the microphone on and it keeps opening the app by itself and it’s a blank screen and every time I close it it just reopens. I don’t know why it keeps doing this, but it drives me crazy. Does anyone know what else to do? I also have the beta iOS 26 but it’s been doing this even with the past update.

i would like to ask what are the new touchpad shortcuts in the latest os for ipad using a trackpad. The three fingers swipe to the right and left seemed to be removed. Thank you

Hi everyone — I’m implementing the new Hearing Device Support API described here: https://developer.apple.com/documentation/accessibility/hearing-device-support I have MFi hearing aids paired and visible under Settings → Accessibility → Hearing Devices, and I’ve added the com.apple.developer.hearing.aid.app entitlement (and also tested with Wireless Accessory Configuration: https://developer.apple.com/documentation/bundleresources/entitlements/com.apple.external-accessory.wireless-configuration ). com.apple.developer.hearing.aid.app xxxxx but the app won't even compile with this entitlement Problem NotificationCenter.default.addObserver(...) for pairedUUIDsDidChangeNotification never fires — not on app launch, not after pairing/unpairing, and not after reconnecting the hearing aids. Because the notification never triggers, calls like: HearingDeviceSession.shared.pairedDevices always return an empty list. What I expected According to the docs, the notification should be posted whenever paired device UUIDs change, and the session should expose those devices — but nothing happens. Questions Does the hearing.aid.app entitlement require special approval from Apple beyond adding it to the entitlements file? Is there a way to verify that iOS is actually honoring this entitlement? Has anyone successfully received this notification on a real device? Any help or confirmation would be greatly appreciated.